Flanging and Seam Rolling Machine

FALKEN // ISITAN IBKS 2.5 MOTO

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Godpeq D Dzljfx Ad Robi Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -

Condition: used, Year of construction: 1980, machine/vehicle number: xxxx, Lg.no. 24211 Technical data approx: Gedpfst H I Aqsx Ad Rebi - max. working width 1020 mm - max. material thickness at 40 kg/mm² strength 1.5 mm - man. back gauge adjustable up to 550 mm - front angle stop - sheet hold-down device - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg - mobile

Condition: new, sheet length: 1050sheet thickness: 1,0weight approx.: 0,185messurements (LxWxH): 1,4x0,7x1,12 Godpod Eqrpsfx Ad Robi

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) Gsdpfx Aexabnyjd Robi - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m Gsdpfx Aohpktvjd Robi The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Gbjdefifg Hspfx Ad Rsi Height 3230 mm Weight approx. 17250 kg

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch Gedpfx Aofv H Edsd Rebi - Footswitch - 7 pcs. Roll sets

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Gsdpew Tcncsfx Ad Rebi Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: new, Model Name Shark 332-1 CCS Godpfxjgvquwe Ad Rjbi

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 130P - C Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Power: 130 tons (1300kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: Gbsdenyh Sispfx Ad Roi * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine