Vertical machining center

FEHLMANN Picomax 90-M

Condition: excellent (used), Year of construction: 2007, operating hours: 10,000 h, functionality: fully functional, CNC controller: HEIDENHAIN iTNC 530M Axes X-axis travel mm: 700 Y-axis travel mm: 420 Z-axis travel mm: 610 Feed rates m/min: 1 - 20 Worktable Table dimensions mm: 1.260X490 Spindle Spindle speed rpm: 50 - 20.000 Tool system Tool holder: SK30 Tool magazine slots: 32 Equipment 3D infrared measuring probe Coolant system 3 bar / 30 l/min Oil mist extraction system Minimum quantity lubrication system with 2-fold metering device FEHLMANN HSC settings (cycle 327) Laser tool measurement for measuring tool length and diameter (BLUM) Djdjvrd Htopfx Afneun Machine running times Spindle Working: 10.000 Basic machine dimensions / weight Length mm: 2.500 Width mm: 2.560 Height mm: 2.700 Weight kg: 5.100

Condition: ready for operation (used), controller model: Haas, empty load weight: 12,000 kg, total length: 5,950 mm, total width: 3,048 mm, total height: 2,200 mm, swing diameter over cross slide: 2,000 mm, Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Spanenafvoerband CNC Hollow Spindle Slant Bed Oil Country Lathe Swing over bed: 1350 mm Swing over cross-slide: 400 mm Duedpfewu Ipisx Afnsn Dia of spindle bore: 270 mm!! Power on the spindle: 55 HP Number of speeds: 1 > 500 rpm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Dedpfx Aerl S Ufefnsun Year of construction: 2000

Condition: good (used), Robot Dusdpfx Aebrhtdefnon Manfacturer: Staeubli Type: RX170

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 500 mm, For sale is a Garant tool presetting device, model VG1. The measuring system is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Z-axis: 500 mm Measuring accuracy: 1 µm Tool holder: SK50 Transport and loading can be organized across Europe upon request and for an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? Duodjxf T R Repfx Afnjn For more information or contact options, please visit our website.

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Dusdew T Sd Tspfx Afnon Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: excellent (used), Year of construction: 1999, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 505 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain, controller model: TNC 426, workpiece weight (max.): 300 kg, table width: 380 mm, table height: 1,004 mm, table length: 920 mm, overall weight: 250 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 10 W, Equipment: documentation/manual, rotational speed infinitely variable, The machine is equipped as follows: -Tool holder: SK 30 -Tool changer with 24 places (automatic tool change) -Coolant system -Spindle cooling -Mist extraction -Chip drawer Djdpfx Asv A Tyqjfneun -RENiSHAW measuring probe

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head Dsdpfxou Rnlus Afnsun - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Condition: new, Year of construction: 2025, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Duedpoh Su Ipefx Afnon Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, General Data Machine weight 27750 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Dusdpex D R A Uefx Afnon Main Drive Spindle speed range 10000 Tool taper ISO 50 Number of axis 5 Movement X-Axis Movement 2600 mm Y-Axis Movement 1100 mm Z-Axis Movement 900 mm Table Table load 4000 kg This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. Application Types Milling