Control unit

FIDIA GT 1710

Condition: new, Year of construction: 2025, Ref. -No.: 10463 Manufacturer: IGREK Type: FR 3500 XL Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 6500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° C-Axis: 360 ° Turning Speeds: 12500 RPM Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Table-Size (Lxw): 2290 - 6490 x 3580 mm Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Machine length: 11500 mm Machine width: 7400 mm Machine Height: 6600 mm Weight: 120 t Dusdpfx Aisxmd Szodsw Further information: IGREK FR 3500 XL – Precision and performance at the highest level The IGREK FR 3500 XL is a CNC-controlled 5-axis portal milling machine of the latest generation (year of manufacture 2024). It was specially developed for the demanding machining of large workpieces and impresses with its versatility and precision. With a modern control system from Siemens 840D or Heidenhain iTNC 640 and a robust construction, the machine offers optimal conditions for manufacturing in a wide range of industries. Key features: Large machining areas: With travel distances of 6,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine is ideal for machining large components. 5-axis simultaneous machining: The A-axis with a swivel range of +/- 115° and the C-axis with a rotation of 360° enable highly precise machining of complex geometries. Powerful spindle: The spindle reaches speeds of up to 12,500 rpm and a maximum torque of 235 Nm – perfect for demanding milling work. High stability: The machine weight of 120 tons and the table load of up to 4,000 kg ensure low-vibration machining even with heavy workpieces. Flexible tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and optimal process times. Rapid feed rate: High productivity is achieved with 30 m/min in the X, Y and Z directions. Technical data at a glance: Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool holder: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg The IGREK FR 3500 XL sets new standards in the machining of large parts. It is available immediately and offers comprehensive warranties and services directly from the manufacturer, internationally and across the board. Use the latest technology for your production – contact us for further details!

Condition: ready for operation (used), Year of construction: 2000, operating hours: 38,515 h, spindle speed (max.): 10,000 rpm, overall weight: 6,500 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 426, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm, providing versatile machining capabilities. The machine is equipped with a HSK 63 tool holder and a Heidenhain iTNC 426 CNC control for precision operations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U universal machining centre we have for sale. Contact us for further details. • Interference circle (Störkreis): 400 mm • Operation voltage: 400 V (3 phase, 50 Hz) • Control voltage: 24 V (DC) • Total nominal current: 63 A Dodpfeyz Tygox Aideuw • Total power rating: 42 kVA • Spindle on: 38,515 hours • Axes in motion: 36,413 hours • CTS • Chip conveyor Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. Dsdpsyuw Srjfx Aidsuw The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Dujdeynky Aopfx Aidjw Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment • Documentation/manual Machine Benefits Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm • Spindle bore: 86 mm • Tool holder: 55 mm Dujdpjx D H Aqjfx Aidow • Speed infinitely adjustable Extra Information Machine still under powerClamping range 30–150 mmMaximum opening 170 mmMeasuring arm for tool measurement

Condition: new, Year of construction: 2026, A 220-liter top-loading sandblaster with telescopic cylinders is a device for sandblasting and cleaning surfaces from rust, paint, greasy deposits and other impurities. The top opening significantly improves the ergonomics of working with heavy details. It is standardly equipped with a set of nozzles, a gun and glass protection stickers. A sandblaster is an essential tool in the metal, automotive, construction and shipbuilding industries. Thanks to its capacity and the stream of sand to the type of surface, the sandblaster ensures quick and effective cleaning of surfaces. The KDP220TOP sandblaster is a top quality product. It provides users with long and reliable work, and what is more, it enables quick and effective cleaning of surfaces of various types of elements. Equipped with an upper opening on telescopic actuators, it significantly improves work ergonomics and makes it easier to load heavy elements, and the capacity of 220 liters enables effective cleaning of larger surfaces in a short time. Advantages of our sandblaster model Complete for immediate use Convenient sandblasting gun with 4 replaceable ceramic nozzles Large, stable front door with rubber seal around the perimeter for safe and dust-free operation Telescopic actuators for increased work comfort High-quality rubber gloves integrated with the device Vent connection Efficient lighting of the workspace 4 pieces of replaceable protective film for the window, visor Sand blasting hose placed at the bottom of the collection container Adapted to work with various abrasives Drain hole allows for quick change of blasting material Ease of use, reliability and work safety Technical parameters Technical parameters of KDP220TOP AIR REQUIREMENTS 400-700 L/min ALLOWABLE PRESSURE 8 BAR Dusdpfovzqf Usx Aidew AIR CONNECTION 1/4" quick connector ABRASIVE TANK CAPACITY +/- 18kg SUCTION CONNECTION (venting) 63mm VIEWFINDER AREA 540x250mm FRONT HEIGHT 370mm INTERIOR CABIN DIMENSIONS (LxWxH min-max) 840x550x370-550mm EXTERNAL DIMENSIONS OF THE CABIN (LxWxH min-max) 890x560x1118-1380 mm WEIGHT 49kg Technical parameters Technical parameters of the extraction unit MODEL DC23 TENSION 220V POWER 1200W UNDERPRESSURE >12Kpa INPUT DIAMETER 45mm CAPACITY ~16l Standard equipment Work area lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality rubber work gloves, integrated with the device 2 suction (venting) connections with a diameter of 63 mm and 90 mm, enabling the connection of a suction device Sandblasting gun with 4 replaceable ceramic nozzles in sizes: 4, 5, 6, 7 mm 4 pcs. of replaceable protective film for window, visor Upper door with rubber seals around the perimeter to ensure dust-free operation Stable grid on the processing field Instructions in Polish Dust Extractor DC23 Connecting hose approx. 2m Bag filter We kindly inform you that the device requires self-assembly. Manufacturer: Cormak

Condition: used, Year of construction: 2001, Technical details: x-travel: 2500 mm y-travel: 1000 mm z-travel: 750 mm table surface area: 3220 x 1000 mm Workpiece weight approx.: 3000 kg spindle taper ISO: 50 milling spindle turning speeds: 20 - 5000 U/min feed speeds: 1- 30000 mm/min rapid traverse: 30 m/min total power requirement: 40 kW Dujdjvptmwjpfx Aidsw dimensions of the machine ca.: 6,9 x 4,1 x 3,7 m weight of the machine ca.: 21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders *

Condition: used, fuel type: diesel, Manufacturer: CATERPILLAR Dedpfxec Urcie Aidjuw Type: V 250 Capacity: 12000 kg Lift Height: 3710mm Boom height: to insert moulds of fork length: 1400mm width: 2550mm Overall length: 6400mm

Condition: good (used), Year of construction: 2016, Table size 3000 x 1700mm, Traverses X Y Z 3200 x 2100 x 920mm, Dodpfxowu Dlas Aidouw Table load 11,000kgs, spindle nose to table 164 – 1084 mm, spindle bored Din 50, spindle speed 6000 rpm, 40 station ATC, Hurco Winmax 5 control. swarf conveyor

Condition: used, Year of construction: 1995, x-travel 1200 mm y-travel 600 mm z-travel 600 mm table-size 1300 x 600 mm max. workpiece weight 2000 kg spindle taper ISO 50 spindle turning speed - stepless 30 - 3500 U/min feeds -stepless- 1 - 6000 mm/min rapid traverse 10 m/min power capacity - milling spindle 18 kW max. torque on the spindle 500 Nm distance work spindle /surface of the table 267 - 867 mm distance table-vertical head 58 - 658 mm voltage 380 V / 50 Hz control voltage 230 V Dujdpfovw Duhex Aidew total power requirement 22 kW weight of the machine ca. 6,5 t dimensions 3,6 x 4,2 x 2,3 mm • CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment • electr. handwheel, • vertical head manually tiltable, • coolant device,