Magnetic vibratory finishing machine

Forplan Ergomag PM 3000

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer Credpfxsh I N Uds Al Rjc * Special construction of control panel(EU Standarts) included

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. Cedpjg Rxhgofx Al Rorc The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process.

Condition: used, Year of construction: 2020, machine/vehicle number: 031EP-2020, Lg.no. 24558 Technical data: - Abrasive diameter 150 mm - Sanding unit swivels on articulated arm - Swivel radius of sanding arm 2000 mm - Motorized dust extraction - Infinitely variable disc speed Crjdpfxevazz Do Al Roc - 800 - 2200 rpm - Table dimensions 1500 x 880 mm - table height approx. 920 mm - Drive 400 V / 3.6 kW - Space requirement approx. W 1600 x H 1600 x D 1600 mm - Weight approx. 250 kg

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or * Crjdpfx Alem Rpy Re Rec

Condition: good (used), Rotary vibrator, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, trowal system, continuous vibrator, vibration conveyor, oscillating conveyor -Manufacturer: circlon, round vibrator Trowal vibrator with soundproof hood -Total volume: 230 liters Cjdpfxsiy Ef As Al Rsrc -Type: CLS-230 -Working container: elastically mounted -Working basin width: 250 mm -Outlet: approx. 200 x 260 mm -Working basin height: 510 mm -Equipment: manual separating flap, infinitely variable engine speed via variator gear, liquid connection -Machine for: deburring, polishing, rounding edges -Transport dimension: 1700/1600/H2240 mm -Total weight: 1150 kg

Year of construction: 2019, condition: ready for operation (used), This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated XY and angle digital displays for precise measurements. The machine includes a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision mechanics. Contact us for more information about this machine. • Laterally correct image (no reflection) for easy evaluation • 3-position objective turret for quick magnification selection • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary stage type 2 • Maximum workpiece height: 100 mm • Integrated XY and angle digital display for precise readings • Illumination: combination of contour (transmitted) and vertical (incident) light Cjdpfx Ajx D I Etsl Rerc • Light source: 24 V / 150 W halogen for high-quality projection • 4-fold condenser in transmitted light with automatic illumination adjustment to magnification • Optics: semi-transparent mirror for clear incident-light image; telecentric lenses for distortion-free imaging across the full field • Focusing via movable optical head (stage remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; inclination/area illumination ±0.15% • Solid construction with precision-engineered guides; workshop-ready and easy to operate • Proven Nikon quality, made in Japan • Large projection area suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision mechanics, and sample inspection • Flexibly upgradeable with digital interfaces or SPC connectivity

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions Cedpfx Alst Tqy Ee Rjrc drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, used Timesavers Model 22-Series-900-WB - DEMONSTRATION MACHINE - The machine is powered up and can be inspected by appointment! Technical data: Year of manufacture: 2023 Max. working width: 900 mm Table opening: 1 - 125 mm Conveyor speed, frequency-controlled: 2.5 - 14 m/min Electrical: Conveyor motor, frequency-controlled: 1.5 kW Table adjustment motor: 0.37 kW Electrical connections: 400 V Frequency: 50 Hz Control voltage: 24 V Total power: 28 kW Compressed air: Required air pressure: 6 bar Crodpsyu Tfhefx Al Roc Total air consumption: 20 l/min Total dedusting capacity: Required extraction capacity at 100 mm WG: 3,000 m³/h W Unit: Roller unit Contact roller assembly, Ø150 mm Contact roller rubber hardness 45° Shore Abrasive belt speed: 11 - 22 m/sec Abrasive belt size (L x W): 1,900 x 930 mm Total power W Unit: 15 kW B Unit: Brush unit Brush Ø200 mm Oscillation: 110 H/min Main motor: 11 kW Total power B Unit: 11 kW Machine version according to CE door switch Emergency stops at infeed and outfeed of machine Unpacked machine weight: 2,060 kg Dimensions (L x W x H): approx. 1700 x 2000 x 2400 mm

Condition: ready for operation (used), Year of construction: 2006, Speeds up to: 2250 rpm Feed rate: 0 - 300 mm/min Drive power per motor: 2.9 kW Crjdpfxjyfgd Ej Al Rjc Electrical connection: 400 V Weight: 395 kg Required space: 4100 x 1670 x 1450 mm

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) Cedpfshbal Dex Al Rerc - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition