Portal milling machine 5 Axis 1750 x 1400 mm

FPT Industrie STINGER

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 18,000 rpm, spindle motor power: 33,000 W, number of axes: 3, This 3-axis FPT STINGER 180 vertical machining centre was manufactured in 2021. It features an impressive X-axis travel of 1750 mm, Y-axis travel of 1400 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful spindle speed of up to 18,000 rpm and a tool changer capable of holding 60 tools. If you are looking to get high-quality machining capabilities, consider the FPT STINGER 180 machine we have for sale. Contact us for further details. Bsdszw Iw Aepfx Afxell - Max. Interpolating Axis Speed: 35 m/min- Installed Power: 65 kVA- Required Current: 93 A- Pneumatic System Air Flow: 400 Nl/min- Pneumatic Operating Pressure: 6 bar- Rotary Table Length: 1200 mm- Rotary Table Width: 1000 mm- Table Load Capacity: 3000 kg (centrally and evenly distributed)- Distance Table Surface to Vertical Spindle Front Edge: 105 - 905 mm- Max. Horizontal Clearance: 1430 mm- Floor to Table Surface Height: 800 mm- Table T-Slots: 9 T-slots (center slot 18 mm H7, remaining 18 mm H11, spacing 100 mm)- Table Positioning Resolution: 0.0001°- Table Rapid Rotation Speed: 7200 °/min (20 rpm)- Table Clamping Torque: 7500 Nm- Table Positioning Accuracy P: 8 sec- Table Repeatability Accuracy Ps: 4 sec- CNC Control Unit: HEIDENHAIN TNC 640 (19" TFT color flat screen, 4 GB RAM, 32 GB SSD, interfaces: 1x RS-232-C, 2x Ethernet, 5x USB)- Portable Handwheel: HEIDENHAIN HR520- Spindle/Head Type: Automatic universal head with 0.001° indexing, Direct Drive motor, liquid cooled- Spindle Taper: HSK-A63 DIN 69893- Spindle Speed: Up to 18,000 rpm- Spindle Power (S1/S6): 22 / 33 kW- Spindle Torque (S1/S6): 84 / 128 Nm- Head A-Axis Swivel Range: +/- 185°- Head A-Axis Max Speed: 30 rpm- Head A-Axis Clamping Torque: 1400 Nm- Head A-Axis Max Available Torque: 410 Nm (302 ft lb)- Table Axis Max Available Torque: 2500 Nm (1844 ft lb)- Tool Changer: Chain tool changer, 60 tools, VERT position- Max Tool Length: 300 / 350 mm- Max Tool Diameter: 75 mm- Max Tool Weight: 10 kg- Laser Probe: RENISHAW laser probe software system (max tool diameter 180 mm)- Workpiece Measuring Probe: RENISHAW RMP40M radio probe with LP2 (100 mm length, 6 mm diameter stylus) and RMI-Q receiver- Coolant System: Internal (30 bar, 10 l/min) and external (30 bar, 40 l/min) coolant supply, 800 l tank capacity, 80/60 micron filters- Internal Air Supply: High-speed internal compressed air through spindle (up to 24,000 rpm)- Chip Conveyor: 2 built-in screw conveyors with discharge to the right- Vibration Sensor: SRV collision and vibration overload detection sensor

Condition: used, Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,400 mm, CNC HEIDENHAIN iTNC 530 X-AXIS STROKE 6000 MM Y-AXIS STROKE 1400 MM Z-AXIS STROKE (VERTICAL) 2500 MM SPINDLE CONNECTION ISO 50 DIN 69871-B50 SPINDLE SPEED 5000 RPM MOTOR POWER S1 37 KW - S6 56 KW Bledexhqivepfx Afxjl AUTOMATIC INDEX HEAD 1 ° X 2.5 ° TOOL CHANGER 40 PLACES COOLANT TROUGH THE SPINDLE AND EXTERNAL CHIP CONVEYOR ANCHORING PLATE 8000 X 2000 MM PERIMETER PROTECTIONS

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC Bjdpfxowl R Ddj Afxjll CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER

Condition: used, Year of construction: 2007, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm control iTNC530 Heidenhain B - axis +/- 90 x 1 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X-axis 100 m/min rapid traverse Y-axis 60 m/min rapid traverse Z-axis 60 m/min spindle turning speed - stepless 20 - 10.000 U/min Blodpoy Sbiksfx Afxjl tool taper SK50 power capacity at 100 % load 32,00 kW power capacity at 40 % load 48,00 KW max. torque at 40% / 100% load 294 / 196 kW table surface area 4.200 x 900 mm number of T-slots 9 T-slot - distance 100 mm T-slots 1x 18H7 / 8x 18H12 table load capacity - central/maximum 4.200 kg tool magazin: 80 tool diameter 115 mm wotkpiece diameter with 2 vacant positions 160 mm tool length - max. 360 mm weight of tools max. 12,00 kg total power requirement 85,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 11,50 x 6,60 x H3,30 m Vertical machining center with HEIDENHAIN iTNC530 control, swivel milling head, partition wall, tool rack magazine with 80 positions, chip conveyor, coolant system, NC-extension table Ø700mm, operating mode 4.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of manufacture: 2007 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm - HSK 63 - Measuring probe - Blum laser tool measurement system - Coolant tank, 980 liters - Internal coolant system, 40 bar Bodezhufhjpfx Afxell - Chip conveyor - Electronic handwheel - Operating mode 4 - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from a space technology institute. Excellent condition. Subject to errors and prior sale.

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Bodpfx Aoy H Dahjfxoll Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. Bodpfxoyw Inqo Afxoll ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine approx.LxWxH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m Bedpfx Afjytcf Uexoll dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, Bjdpfx Afsylbpvsxell spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Year of construction: 2002, condition: excellent (used), 10-2 bar, year of manufacture 2002 Blodpfoykyqisx Afxjl