Dowel boring machine

Ganner Optima 21/510

Year of construction: 2019, condition: ready for operation (used), Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 6 Movement Y-Axis Movement ±31 mm Y-Axis Rapid Traverse 6 m/min B-Axis Movement 525 mm B-Axis Rapid Traverse 40 m/min C-Axis Rapid Traverse 600 rpm Hfodpfx Aox D Rqxshaeh This 6-axis NAKAMURA WT-100 was manufactured in 2019 and features dual spindles with a speed of 6,000 rpm and a motor power of 11/7.5 kW each. It boasts a bar capacity of Ø42 mm and a maximum turning diameter of Ø190 mm. The machine includes a dodecagonal drum turret with 24 indexing positions and rapid traverse rates up to 40 m/min. If you are looking to get high-quality turning capabilities, consider the NAKAMURA WT-100 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2024, overall weight: 41 kg, controller manufacturer: FANUC, number of axes: 6, This 6-axis FANUC CRX-20iA/L robot arm was manufactured in 2024. It features a maximum load capacity of 20 kg and a reach of 1418 mm. The robot's joints have extensive motion ranges, enhancing its flexibility for complex tasks. If you are looking to get high-quality automation capabilities, consider the FANUC CRX-20iA/L machine we have for sale. Contact us for more information. • The Robot is new and unused. Only unpacked. • Max. load capacity at wrist: 20 kg • Max. reach (end-of-flange): 1418 mm • Controlled axes: 6 • Repeatability: ±0.04 mm • Mechanical weight: 41 kg • Joint motion range: Hfodex D Ezljpfx Ahaoh • J1: 360° • J2: 360° • J3: 540° • J4: 380° • J5: 360° • J6: 450°

Condition: excellent (used), Year of construction: 2018, operating hours: 10,035 h, functionality: fully functional, Emco Hyperturn 45 Machine with few operating hours and in very good condition! Only small parts were manufactured; it was never used for truly heavy work. The machine has a very extensive range of equipment: - Spindle bore 46 mm - Y-axis in the upper turret - Turret VDI 25 with driven tool stations - Part ejector and part collection tray - Part conveyor belt - Higher coolant pressure (14 bar) - 2x Hainbuch collet chuck Mini SK 52 - Tool measurement - Emco bar feeder - Chip conveyor - LED status indicator Software: Siemens 840D-sl with Shopturn + Tool breakage and wear monitoring + 4-axis turning/balance cutting + Shopturn expansion package (residual material detection) + Energy management / automatic shutdown Hsdpfoy Udv Sox Ahaefh The machine is fully functional and is still in production; inspection is possible at any time. The machine is available immediately. All scrapers and wiper blades are in very good condition! The control cabinet is very clean, with no oil mist deposits.

Condition: used, Year of construction: 2011, turning diameter 160 mm turning length 550 mm Hfjdpfx Ahsyuzfpjajh control Siemens weight of the machine ca. 9000 kg

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. Hfedoxnlflopfx Ahash - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: excellent (used), Year of construction: 2009, operating hours: 28,742 h, functionality: fully functional, bar passage: 65 mm, FANUC Series 31i-Model A 3 turrets Hodjydmbuepfx Ahasfh Parts conveyor Magazine Further details on request

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm Hfodpfx Ahjx D Iuzoaoh • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mm Turning length : 800 mm Hjdpfxey A U Ize Ahasfh Mainspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:76 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Ejector:Pneumatic Movement in Z:800 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:260/100/800 mm Eilgang in X/Y/Z:30/12/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:210/800 mm Eilgang in X/Z:30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Rawmaterialfeed I:Robotinterface prepared Rawmaterialfeed II:Barloaderinterface prepared Finishedpartremoval:Workpiece unloading device with conveyor belt Oilmistseparation:Interface prepared Toolholder:Misc. static and driven toolholder Further Accessory:Automatic Door, Rinsing pistol

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 500358, turning length: 1,250 mm, turning diameter: 300 mm, spindle motor power: 43 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, INDEX G300L with Promot gantry loader. Machine is still in production and under power. The promot loader has 2 rotary indexing belts with approx. 30 pallet spaces each. The machine is equipped with high-pressure cooling lubricant (40 bar), paper belt filter and tool changer. For further information please contact us by mail. Hfedpfeu Nmq Hox Ahaeh

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed: 600 mm * over cross slide: 500 mm Distance between main and sub spindle: 975 mm Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Max. workpiece size with sub spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Max. bar capacity: 65 mm Max. chuck size: 200 mm C-axis *resolution: 0.001° Sub spindle Drive power (100/40% ED): 17/22 kW Speed range: 0 – 7000 rpm Max. chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *resolution: 0.001° Upper tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: +50 mm Lower tool turret Disc turret with directional logic Number of stations: 12 Hsdjyx U Hijpfx Ahaefh of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES - Fully enclosed guard electrically interlocked, with sliding doors and machine light - IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement - Thermocompensation systems for integrated spindle motors (liquid cooled) - Hollow clamping cylinder with draw tube for main spindle - Solid clamping cylinder with draw bar for sub spindle - C-axes for main and sub spindle - Transmit software for easy C-axis programming - Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity) - Drive units in upper and lower turret - Parts ejector and flushing through the sub spindle - Finished parts pick-off device Maximum finished part: ø 65 x 200 mm Maximum finished part weight: 4.5 kg - Conveyor belt for removing finished parts from the machine - Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret Clamping diameter range: 10 – 70 mm - Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar - Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant - Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining - Electronic oil mist separator 800 – 1000 m³/h - Automatic central oil lubrication for guideways and ball screws - Grease lubrication for main and sub spindle - Foot pedal for actuation of clamping devices - HAINBUCH collet chuck size 65 for main spindle, without stop (without collets) - HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets) - 3-color signal lamp (red, green, white) - Serial interface - Mounting elements - Documentation