Dowel boring machine

Ganner Optima 21/510

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Rodpfsygtbtex Aa Ijw Max. panel length: 3800 mm Main saw blade projection: 55 mm No of Grippers: 4

Condition: used, Year of construction: 2011, turning diameter 160 mm Redpfxeyuzfps Aa Isw turning length 550 mm control Siemens weight of the machine ca. 9000 kg

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. Rjdoxnlflopfx Aa Ijw - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Rodpfx Aewuuc Aoa Iew Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840Dsl Rsdpfxjy A U Izo Aa Ijw Turning diam. : 500 mm Turning length : 800 mm Mainspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:76 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Ejector:Pneumatic Movement in Z:800 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:260/100/800 mm Eilgang in X/Y/Z:30/12/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:210/800 mm Eilgang in X/Z:30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Rawmaterialfeed I:Robotinterface prepared Rawmaterialfeed II:Barloaderinterface prepared Finishedpartremoval:Workpiece unloading device with conveyor belt Oilmistseparation:Interface prepared Toolholder:Misc. static and driven toolholder Further Accessory:Automatic Door, Rinsing pistol

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Rjdpfxeyx U Hie Aa Iew Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed: 600 mm * over cross slide: 500 mm Distance between main and sub spindle: 975 mm Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Max. workpiece size with sub spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Max. bar capacity: 65 mm Max. chuck size: 200 mm C-axis *resolution: 0.001° Sub spindle Drive power (100/40% ED): 17/22 kW Speed range: 0 – 7000 rpm Max. chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *resolution: 0.001° Upper tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: +50 mm Lower tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES - Fully enclosed guard electrically interlocked, with sliding doors and machine light - IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement - Thermocompensation systems for integrated spindle motors (liquid cooled) - Hollow clamping cylinder with draw tube for main spindle - Solid clamping cylinder with draw bar for sub spindle - C-axes for main and sub spindle - Transmit software for easy C-axis programming - Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity) - Drive units in upper and lower turret - Parts ejector and flushing through the sub spindle - Finished parts pick-off device Maximum finished part: ø 65 x 200 mm Maximum finished part weight: 4.5 kg - Conveyor belt for removing finished parts from the machine - Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret Clamping diameter range: 10 – 70 mm - Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar - Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant - Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining - Electronic oil mist separator 800 – 1000 m³/h - Automatic central oil lubrication for guideways and ball screws - Grease lubrication for main and sub spindle - Foot pedal for actuation of clamping devices - HAINBUCH collet chuck size 65 for main spindle, without stop (without collets) - HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets) - 3-color signal lamp (red, green, white) - Serial interface - Mounting elements - Documentation

Condition: used, Year of construction: 2016, total length: 6,400 mm, total width: 1,500 mm, total height: 1,700 mm, Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 3200 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Spindle speed: Automatic - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 400 - Current consumption [A]: 18.5 - Fuse [A]: 25 - Transport dimensions: 6400mm x 1500mm x 1700mm (l x w x h) - Transport packages [pcs.]: 2 Financial information Redpfoyvh Rvjx Aa Iew VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle Rsdjx D Iuzepfx Aa Iow • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: ready for operation (used), Year of construction: 1999, Brand: Homag Type: Optimat CH 03/32/32/E Plus Serie no: 0-341-07-5006 Year: 1999 Techn info: Saw width, with fence: 3 200 mm Saw length: 3 200 mm Cutting height: 50 mm Main saw blade: Ø 300 x 75 mm Scoring saw blade: Ø 125 x 45 mm Main saw speed: 5 100 rpm Scroll saw speed: 5 500 rpm Program carriage feed: 14 m/min Saw carriage feed, forward and return: 6-32 m/min Return feed: 32 m/min Main saw motor power: 5.50 kW Scroll saw motor power: 0.55 kW Operating voltage: 380 V, 50 Hz, 3 phase, 32 amps Control voltage: 24 V DC Floor quality: min. 5 Kp/cm² Connection cable: 5 x 6 mm² 1 fixed, coated front table 1 750 x 400 mm Stock no: 2002415BXM Rodovwku Uepfx Aa Iow

Condition: excellent (used), Year of construction: 2022,