CNC Lathe with c-axis GEMINIS - GHT4-G4

GEMINIS GHT4-G4

Condition: good (used), CNC Lathe with y-axis Geminis Goratu - GHT-4 G4-800 Max. turning Ø:800mm Length: 7000mm Ijdpfxoygv Eus Akxoif Width: 2500mm Height: 2500mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2010, Technical details: x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm turning speeds: 20 -10.000 1/min control: HEIDENHAIN iTNC 530 tool change unit: 30 Pos. tool taper: SK 40 rapid traverse: 24 m/min spindle: 13 / 9 kW Round-swivelling table: 630 x 500 mm total power requirement: 26 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,1 x 2,4 x 2,6 m Iiodszp Nfrspfx Akxef 5-axis simultaneously machining center, NC-round-swivelling table B -5 / +110°, C360°, direct measuring system, el. handwheel, flush gun, chipconveyor, infrared touchprobe TS 649, mode 4, laser tool measuring system, approx. 95.000h "machine on", approx. 11.500h "spindle on" *

Condition: good (used), Year of construction: 2006, Brand: GEMINIS Model: GHT4 G2 700x 2000 Cnc: FANUC 21 TB Iijdpjxdub Ijfx Akxof Distance between centers: 2000 mm Ø Swing over bed : 720 mm Ø Over carriage: 470 mm Spindle diameter : 104 mm Maximum piece weight between points : 2.560 kg Spindle nose: DIN 55027-11 Spindle speed: 0-1600 m/min Total power : 28 kw

Condition: used, Year of construction: 2016, operating hours: 1,476 h, functionality: fully functional, Hello, we are offering a Hurco VM 30 i Plus for sale here. Travel: X-axis: 1270 mm Y-axis: 510 mm Z-axis: 510 mm Control: Max5 Taper: SK-A40 Iiedpfxsyhw Eas Akxsf Max spindle speed: 12,000 rpm Transport weight: 4,550 kg If interested, please call. Sale on behalf of customer.

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min Iiedpjz N Amsfx Akxjf forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, overall weight: 5,770 kg, total length: 15,050 mm, load capacity: 12,500 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: double-girder – Capacity: 12,500 kg – Lifting height: 6 m – Year of manufacture: 2018 – Hoist type: steel wire rope – FEM/ISO hoist: 1Am / M4 Dimensions – Span: 15,050 mm centre-to-centre – Installation height: 970 mm – Width of wheel set incl. buffers: 3,370 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Total weight: 5,770 kg (of which trolley 846 kg) Speeds – Hoisting: 5/0.8 m/min Isdpfx Akjy T Hfgoxsif – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Specifications – Control: Abus radio control, including spare transmitter – Crane manual available: yes – Dismantled: yes, available immediately – Hour meter: 306 hours (as of 26/6/2025) – Last service: 26 June 2025 – Condition: in very good condition, well maintained

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system Iisdpfet Akt Rex Akxjf PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Ijdpsgyy I Aefx Akxeif Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1250 mm turning length: 6000 mm spindle bore: 130 mm Turning rate: 5 - 710 U/min. turning diameter over bed slide: 850 total power requirement: 37/52 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 12 x 4 x 2 m Teach In Controll HEIDENHAIN 1 fixed steady Iiedpeyktvxofx Akxjf *

Year of construction: 2004, condition: used, bar material dia. 6 - 120 mm Bar length 100 - 1.600 mm bar weight max. 63 Kg feed length 1.000 mm longitudinal adjustment 600 mm machine weight ab. 600 kg dimensions of the machine ca. 2,2 x 1,5 x 1,5 m Ijdpeyhhriofx Akxsif Current operating hours display: 4867 hours