S/S UNIMAC-GHERRI JAR CAPPER

GHERRI

Condition: refurbished (used), Gherri Gino glass shutter. Type - GG1984. For lids with a diameter of 90mm, 82mm, and 66mm. lids For several sizes of glass Cedpfxoq Iicwo Aftopw

Condition: used, Year of construction: 2004, Overview  The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative.  Technical data  Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable Csdpfom D Ukiox Aftjpw

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Completely stainless steel Cpodpfoh Eazzex Aftew Container Max 180mm wide & 250 hight as-is or tested and adjusted to costomer needs

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling Codsxm Rwqepfx Aftspw 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: good (used), Traypacker / wrap arround packer Trays and wrap-around boxes minimum packaging size L x W x H = 190 x 140 x 80 mm maximum packaging size L x W x H = 460 x 350 x 250 mm 4 lane machine Hotmelt machine was rebuild in 2018 siemens s7 plc controlled easy format change Csdpfx Aofxypieftepw as-is or adjusted to customer needs

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. Cpjdpfx Afev D A Imetsw The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them.

Condition: used, Year of construction: 2006, Tecnoindustria Used Pasteurizer Completely Overhauled Tecnoindustria brand mesh pasteurizer all stainless steel with squared stainless steel mesh complete with water recycling tanks with relative pumps, infeed and outfeed belt for jars or boxes, blower for drying jars or boxes, steam modulating group, heat exchanger, various connecting pipes and all its accessories for operation. The machine is totally overhauled It is made up of two sectors of which: first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400 Features by section Cjdevguhkepfx Aftopw Sterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,300 useful Length of warm water cooling + cooling: mm. 7,000 useful Height mm 1400 Single track entry belt width: mm 200 Length: mm 3200 Single lane outfeed belt with Intralox belt width: mm 400 length: mm 3700 useful Tecnoindustria Used Pasteurizer Completely Overhauled, The machine is totally overhauled, in excellent condition. It is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized. The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: like new (used), Used Bottling Line | Used Beverage Line | Wine MBF NP 574 | Bottling Line for Still Wine Year: 2011 Speed: 10,000 Bph Cork elevator Filling Monoblock MBF 45.50.6 | Year: 2011 Rinser 45 clamps Filling machine 50 valves Cpodpfxstr Hd Ss Aftew Capper 6 screw heads Bottle dryer Bottle inspector | Level control Sacmi Kube | Labeling machine Year: 2017 No.6 adhesive stations Cermex carton moulder Gluer Nordson TMG cartoning machine DS Smith carton closer Nordson Gluer Carton weigher CONVEYOR BELTS ABSENT

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range Cpsdpfx Aehqmamsftsw • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: (For more extensive technical data, see PDF) Technical details of the machine: - Long-tube filling system with 40 filling valves and 8 KK plungers. - Pre-evacuation system to reduce oxygen intake. - Hygienic bottle table and stainless steel components for durability. - Mechanical adjustment range: 3,000 to 15,000 bottles/hour. - Performance range: 0.33l LN 3,000–13,500 bottles/hour, 0.5l NRW 3,000–12,000 bottles/hour. - Minimal oxygen intake: maximum 0.02 mg O2/l. - Conversion parts available for different bottle types (0.33l longneck, 0.33l Steini, 0.5l NRW). Advantages of the machine: The machine offers numerous advantages that enhance the quality of the filling process. Cjdpswqz Nnjfx Aftjpw - Gentle, product-friendly filling under CO2 atmosphere. - 50–60% less CO2 consumption compared to short tube filling systems. - High longevity thanks to reinforced drive components. - Hygienic design for easy cleaning. - Short changeover times. - Convertible to cans according to manufacturer specifications (conversion kit not included). Low operating hours: 3 days per week, 7 hours each; rarely operated for 4 days per week. Annual maintenance by the manufacturer. The machine is immediately available; it was only removed from production about 5 months ago. Original purchase price was approx. €330,000.