Offset printing press, web-fed

GOSS M 600 C

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg Hjdpfxoh Nrh Ue Aftjfr

Condition: good (used), Size max 510 x 305 x 60 mm Size min 140 x 100 x 3 mm Cover size max 642 mm Cover size min 203 mm Speed max 12.000 c/h Equipment gathering machine • 18 stations • 18 feeders 3661-210 SF intermediate elements • spiral race away • jogging element perfect binder • 25 clamps Hodpfod R Ecpsx Aftsfr • clamp pitch 24" • milling and roughening station • hot melt spine gluing unit • hot melt side gluing unit • premelter • SF stream cover feeder • SF cover nipping and pressing station • lay down device

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Hfodpfx Ajtyyn Hoftor

Year of construction: 2000, condition: good (used), Equipment: Unwind Guide system 1 Hot foil (or embossing) unit 1 Flexo unit 6 offset waterless printing units UV dryers 1 Hot foil (or embossing) unit 1 Embossing unit 1 Flat bed die cutting unit Hfjdpfx Afeumwn Astsr 1 Varnish unit - UV/IR Rewind

Condition: used, Year of construction: 2003, - Folding stations: 1st folding unit with 6 pockets (parallel fold) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) - Folding stations: 3rd folding unit with 2 pockets (parallel fold) - Max. sheet size: 520 x 840 mm - Min. sheet size: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on fold type and material) - Paper weight: 40 – 250 g/m² - Folding types: single fold, roll fold, zigzag fold, double parallel fold, and more - Feeder: flat pile feeder (PBA) - Control: electronic control with folding program memory - Delivery: shingle stream delivery (STA) Hedpfx Aowv D Svsftefr - Optional: perforating, creasing or cutting units (depending on configuration) - Format adjustment: manual - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Special features: - Robust construction with high precision - Suitable for small and medium print runs - Ideal for commercial printers and finishing companies 1 punching tool NE 515 SBP 46-2 vertical sheet delivery, year 1992

Condition: used, Casing-In / Bucheinhängemaschine - Buchformpresse / Book Forming Press Kolbus EMP - FE Year 1966 Block size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Case size min. 125 x 210mm / max. 370 x 62 mm Hfsdpfx Aovuaqysftor Speed up to 36 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2007, MBO K 800.2/6 SKTL AUT with pallet feeder and ASP 66 ME delivery included Parallel break with automated pocket (6 pieces) and roller adjustment MBO slitter shaft cassette Cross and triple fold with pneumatic knife control + pocket is fully automated (can be rotated 180° in a few simple steps) Hedpfxsrwzmwj Aftjfr Sword folding unit with rotating three-fold knife LEFT and RIGHT plus Parallel buckle plate in the RIGHT and LEFT knife folding unit The main computer including touch-screen display was renewed in 2022!

Condition: used, Year of construction: 2007, The Heidelberg Stahlfolder TH 82/6-4-2 - RFH, manufactured in 2007, is a high-quality folding machine with a size of 820 mm. Currently dismantled and located in Germany, this machine features a rotary feeder RFH-82. It includes three stations: the first station has 6 folding pockets of 82 cm with automatic pocket setting, the second station has 4 folding pockets of 66 cm with automatic pocket setting, and the third station has 2 folding pockets of 56 cm with automatic pocket setting. The machine also includes a stacking delivery SBP 66, a touchscreen monitor, and an MCT control system. The specific model is identified as TH82/6/4/2 with the machine number O-00951. Format: 820 mm Equipment: Rotary feeder RFH-82 Hfedpfx Afewnft Sjtjr 1.station: 6 folding pockets 82 cm Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Stacking delivery SBP-46+ MKE+VE Touchscreen-Monitor, MCT-control-system

Condition: ready for operation (used), Year of construction: 2008, two side tables Hodpoxtmhrsfx Aftsfr 3 spare knives total counter 1.7m top condition

Condition: ready for operation (used), Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible. Hfsdpfxetq Ha To Aftor