Veneer saw w. planing unit

Höfer FSP 310

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Nwodpfx Agevvkfdozer

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Nwedpfx Asdwf Dbjgzsr

Condition: ready for operation (used), Technical characteristics pressure 2.2 kg / cm² 18 kW diathermic oil boiler timed pressing digital display Power and Motors Nodpfst N Autjx Agzowr Voltage: 400 V Pluging: Three-phased Power: 20 Kw Overall dimensions Lenght: 3500 mm Width: 1500 mm Weight: 3200 Kg

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Nwsdeiiv Dcspfx Agzjr Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Nwsdewwhn Dopfx Agzsr

Condition: like new (used), Year of construction: 2020, operating hours: 335 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 250 mm, Equipment: USB port, Fully equipped machine, only 335 hours extra tool holder running with frame largest drill head with spindles discharge belt laser pneumatic pistons on the beam automatic lubrication Nwjdpfxewinkpj Agzer

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels Njdpfxocggy Sj Agzjwr - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Hebrock AKV3005DK-F Edge Banding Machine with pre-milling, corner copying, and two profile scrapers. Very well-maintained machine from a small business, in excellent condition. Touch-screen interface with PLC control for user-friendly operation; up to 12 operating programs can be saved. Edge thickness (coil): approx. 0.4 – 3 mm Workpiece height: approx. 8 – 53 mm Feed speed: approx. 10 m/min Noise protection hood Nodpfstpn Etsx Agzewr Extendable workpiece support, special feature extendable up to 950 mm Extraction ports: 80 + 140 mm Units/Equipment: - Quick-change glue pot with glue outlet; two glue pots included (one was used for EVA glue, one for PUR glue). The PUR glue pot is virtually as new, purchased for a single order only. - Manual overhead pressure adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Pre-milling unit with Leitz Whispercut diamond cutters, still sharp - Gluing section with automatic edge feed for coil material up to 3 mm - Pressure zone with 4 rollers - End trimming saw - Integrated edge trim collection bin - Multi-profile milling unit, R2, with pneumatic adjustment between thin and thick edge - Corner rounding unit R2, pneumatically adjustable between thin and thick edge; the molding router can also be used for shelf program, rounding only on straight edges, not corners - Radius scraper R2, pneumatically retractable - Glue joint scraper, pneumatically retractable - Hood lock - CE marking - Operating manual A video of the machine in operation can be provided upon request. All indexable inserts on the milling and scraper units have been replaced or rotated, saw blades have been sharpened. The machine is ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced but are still sharp. Paintwork has been touched up. The Hebrock AKV series is the predecessor model to the current K series. Machine has only approx. 730 operating hours (glue pot switched on), but the frequency converters have only been switched on for approx. 455 hours. Machine is in very good condition—see original photos. Machine dimensions: approx. 5000 x 1400 x 1550 mm (LxWxH) Weight: approx. 1550 kg The machine can be inspected by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see “other offers from this seller.”

Condition: excellent (used), Planer 9 heads Working width - 20 cm Working height - 22 cm 5 pulleys in the table Heads Nedpfx Agjtrdwtezewr 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW PERFECT CONDITION!

Year of construction: 2022, condition: new, ENERGY T15000 15.00 KVA/12 KW At 400V 15,00 KVA /// 12 KW At 230 V 13.8 KWA /// 11.0 KW 184 KG L= 870mm W= 588mm H= 726mm Giri/min - speed 3000 Frequency Hz 50 Voltage 230/400 V Amps 20.0A at 400V 48A at 230V GASOLINE (EURO V) Electric start engine power hp (KW) 21 (15,6) Nwedpfjipvhvex Agzsr Cylinder 2 Cooling system air Protective measures Low oil level Speed governor mechanical Fuel consumption 75% of load Lt/h 4.9 Tank capacity Lt 40 Voltage control AVR Voltage accuracy % ± 1% * 2 CEE socket 32A 3pole 230V single phase * 1 CEE socket 32A 5pole 400V three phase * 1 12V DC * Voltage selector switch (400V three-phase or 230V single-phase) * LED multimeter: Voltmeter, amperometer, KWmeter, frequency meter and hour meter. Power unit stands on 2 stable wheels and 2 legs, and can be moved with them. The handles can be folded to save space ENERGY T15000 Full Servicekit € 54,00 incl. 20% VAT * Worldwide transport incl. unloading is possible for an extra charge * An invoice with VAT will be issued