Vertical Machining Centre

HAAS VF-2SS-EU

Condition: good (used), Year of construction: 1983, machine/vehicle number: 5763, Offer 24590 Technical data: - Drilling capacity 22 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm Hedovxg Rujpfx Aarep - 4 drill spindle speeds 355 – 710 – 1400 - 2800 rpm - Throat depth 210 mm - Machine table 480 x 420 mm - Min. / max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: used, Year of construction: 2018, operating hours: 43,202 h, functionality: fully functional, Doosan Lynx 2100LM – CNC Lathe SPECIFICATION • Control: Siemens S828D • Main spindle max. speed: 6000 rpm • Main spindle motor power: 12.6 / 10.5 kW • Driven tool power: 6.2 / 4.1 kW • Tool stations: 12 • 3-jaw hydraulic chuck: 170 mm • Turning diameter (bed/turret): 600 / 400 mm • Max. workpiece size: Ø 300 x 510 mm • Max. bar diameter: 51 mm • Rapid traverse (X/Z): 30 / 36 m/min • Turret index time: 0.11 sec • Axis travel: o X: 205 mm o Z: 560 mm Hsdeya N Ipjpfx Aarjp • Machine dimensions: 2540 x 1595 x 1693 mm • Machine weight: 3480 kg Equipment • High-pressure coolant, 0.7 MPa • Tool presetter • 8 static and 4 driven tool holders • Tailstock • Collet chuck • Parts catcher • Bar feeder preparation • 3 m LNS bar feeder • Chip conveyor (LNS MH500)

Condition: excellent (used), Year of construction: 2009, x-travel 500 mm y-travel 450 mm Hedpfx Aaezawmaorep z-travel 400 mm control Siemens 840 D tool adaptor SK 40 spindle turning speed - stepless 2 U/min feed speeds mm/min tool change unit 16 surface area 700 x 500 mm workpiece weight max. 500 kg weight of the machine ca. 4,4 t Overall size 2,8 x 2,6 x 2,5 mm Full coverhing/ housing cooling device, handwheel only about 1.500 h

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system Hedpfxeyh Hw Is Aarep • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Hodpjxvrbijfx Aarsp Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s Hjdpjv N Di Ajfx Aarep General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Hsdpfeufp Svjx Aarop Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2012, HAAS ST-10Y cnc lathe with C-axis, Y-axis Year: 2012 Technical details: Chuck Size 165 mm Max Part Swing max 419 mm Max Cutting Diameter 279 mm Max Cutting Length (varies with workholding) 406 mm Bar Capacity 44 mm Travels X Axis 200 mm Y Axis ± 51 mm Z Axis 406 mm Feedrates Rapids on X,Y 12.0 m/min Rapids on Z 30.5 m/min Spindle Nose A2-5 Max Rating 15.0 hp 11.2 kW Max Speed 6000 rpm Max Torque 102.0 Nm on 1300 rpm Draw Tube Bore ø 46 mm Spindle Bore ø 58.7 mm Main Spindle C Axis Positioning (±) 0.02 ° 0.02 ° Hodpfx Asy S S I Roarsp Brake Holding Torque 190 Nm Control Type Interpolated Motion and Positioning Tailstock Taper MT3 Hydraulic Quill Travel 95 mm Manual Body Positioning 508 mm Turret 12 positions Live Tooling Max Speed 4000 rpm Tooling BMT45 Coolant Capacity 114 L Weight 3600 kg Accessories/options: - complete with C-axis and Y-axis - driven tool holders, 2 axial and 2 radial - swarf conveyor - hydraulic chuck - collet type chuck - static tool holders, 10 pieces - parts catcher - tool measuring arm - foot pedals for chuck and tailstock operating Under power in our warehouse, possible to test it anytime!

Condition: good (used), Please read the technical specifications carefully. If the machine is of interest to you as an investment, we kindly ask that you provide full identification, including a correct phone number and email address, when requesting an offer. DECKEL Milling Machine Toolroom Milling Machine DMU 35 M 3 x 2 axes CNC Milling Machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Travel distances (X/Y/Z): 350 x 240 x 340 mm Spindle speed, stepless: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Clamping bolt: DIN 69872 Hodexz Rdajpfx Aarjp Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55 / 80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145 / 485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary axis range: 360 degrees Swivel range: degrees Total power consumption: kVA Weight: approx. 1,750 kg Technical data subject to change! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Fully enclosed guard cabin with sliding door - Swiveling control panel - Coolant nozzles at the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine light - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. Its outstanding universal capability is thanks to the additional manually operated rotary/swivel table, which allows 5-sided machining. Condition: Good to very good, from a vocational training center, see photos. Can be inspected under power.

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm Hodex Aq Hwspfx Aarep turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min