Heating cooling device (art.3171)

HB-Therm 180 Z2

Condition: new, Year of construction: 2025, functionality: fully functional, The granular mixer is available in 6 versions: The version can be made of stainless steel or coated steel: Technical specifications: MV 2 The MV 2 is designed for the complete mixing of the entire plastic granulate, due to the forced guidance provided by the screw sleeve. Container capacity: 120 kg / 200 L L x W x H: 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Screw, removable Bodod R Atrspfx Afxewt - Control for mixing times - Extraction device - 1 drain - Mobile base frame, running rollers 100 mm, all with parking brake.

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. Bwsdpog Ey Ufefx Afxst *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Year of construction: 2003, 5X PIECES handling devices Geiger Bodpfx Aolwqrhofxjwt Type: EA-Mini 2001 SLI Year of manufacture 2001

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Bwjdsg Ey T Espfx Afxjt Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2021, All information is in the attached files. Bwedpfxjpcf D Se Afxst

Year of construction: 2010, condition: used, HB THERM 140 Z 2 (2010) 16KW Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Bjdpov H Ad Hsfx Afxswt Permanent sound pressure level 55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Condition: excellent (used), Year of construction: 2016, Geiger Handling EA Mini 2001 SL Bedpfxjw Hy Iuo Afxswt 4 pieces (2x year 2014, 2015, 2016), 1 pc. without remote control

Year of construction: 2017, condition: good (used), heating cooling device HB Therm 140 Z1 Serie 5 Water, 160°C 9 KW + new Service ! year: 2017-2018 price: 4.950 € contact: Mr. Rainer Eckerle Bsdpfx Aokn Enusfxewt

Condition: ready for operation (used), Description: Geiger MiniServo II 1.5, a servo-motorized demolding device or sprue picker, used on an ARBURG 270 S injection molding machine. The device is designed to precisely and quickly remove sprues or small molded parts from the mold and place them aside. Swivel axis (A): 0-105° Demolding stroke (X): 300 mm with linear guide and rack and pinion Vertical/lateral stroke (Y/Z): 800 mm linear guide and rack and pinion (part and gripper weight up to max. 1.5 kg) Bedpszpzhrjfx Afxewt Servo-motorized drive of the main axes Fail-safe mechanism (Y): electromechanical Sliding console Gripper F Rotary module B (pneumatic) with stop 1 compressed air circuit for gripper 1 compressed air circuit for rotary module B 1 vacuum circuit with monitoring Gebtkoy Tn Rdsqqtioiu Programming assistant for programming standard demolding sequences with 1 pressure and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable 5 m Deposition area behind and in front of the machine RAL 9016 white Additional control HT7, vacuum circuit, and consoles Input voltage: 230 V Since I was unable to observe the device in operation, I cannot provide a guarantee. According to maintenance records, it is in good working order, but it stalled once or twice a week. Switching the main switch off and on again would resolve the issue. Therefore, it is not suitable for continuous operation. I am selling it as a spare parts unit.

Condition: used, Year of construction: 2013, overall weight: 300 kg, load capacity: 3 kg, terms of delivery: FCA Pegnitz delivery time: on request Bwsdpezi E Tlefx Afxst terms of payment: 100% prior to delivery