Drilling and Milling M/C

HBM BF 45 Profi DRO

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW Dsdpfx Aou Idkzjk Askw weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Dsdpfx Ajfzrgysk Askw

Condition: ready for operation (used), Graziano parallel lathe, model SAG 210, center height 210 mm, distance between centers 1500 mm, maximum swing over cross slide 268 mm, maximum swing in the natural gap 580 mm. Bed width 320 mm, spindle bore 57 mm, spindle nose CAM-LOCK type D1-6", 24 spindle speeds, rpm from 38 to 2000. Machine weight 2200 kg. Dimensions (mm): 3095x1030xh1450. Dedpjy N S H Ijfx Ak Aekw

Condition: reconditioned (used), Steel grinding machine Manufacturer: REMA Model: DS 07/ST Version with reversible motor 0.22/0.37 kW 1450/2900 rpm Year of manufacture: unknown Serial no.: 022857 Equipment: - Reversing switch for right/left rotation - Benchtop version with chip tray - Wet grinding system Dodshvu Tmspfx Ak Ajkw - 2 pcs. support table ATS (left) adjustable from -5° to +15° and with spring suspension - 2 pcs. angle stops - Adjustable support table ATK (right) for grinding chip guide steps - Steel holder for support table ATK 360° rotatable, pivotable, with height adjustment and knurled screw for adjusting the chip depth - Enlarged protective cover (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - Protective cover (right) for grinding wheels Ø 125 mm with mounting flange - Operating manual Used, as is, no guarantee

Condition: new, distance between shaft and table: 470total power requirements: 2,2 kwweight approx.: 1,2messurements (LxWxH): Länge2400 mm Breite/Tiefe2160 mm Höhe2300 mm Gewicht 1200 kgspindle rotation speed: 60 4200 min¯¹ Djded H Hhzopfx Ak Aekw

Condition: good (used), Tool holder VDI 30 Djdpfx Aksww Hluo Askw

Condition: used, functionality: not functional, Adcock-Shipley milling machine. NON-FUNCTIONAL unit!!! Dsdpfx Asr Dvqpek Aokw Good mechanical condition, no electronics. We can refurbish the unit for an added fee. Please check out our other listings as well.

Condition: new, DEMONSTRATION MACHINE For sale is a like-new band sawmill with a cutting length of 3,700 mm. The demonstration machine is in its original condition, therefore you will receive the full warranty. - Max. log diameter 550 mm - Max. board width 530 mm - Max. cutting length 3,700 mm (3.7 meters), extendable! - Min. cutting length 900 mm (0.9 meters) - Saw band stroke min./max. = 20/540 mm Dksdsvy Ufvspfx Ak Asw - Max. cutting depth 220 mm - Pulley diameter/width = 400/25 mm - Motor power 5.5 kW (4.0 kW S1/100%) - Motor power for height adjustment 0.12 kW - Saw band length 3,200 mm - Saw band speed 15 m/s - Overall length of the basic version 4,600 mm (4.6 meters) - Weight approx. 350 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: band sawmill, log band saw, band saw, machine Reference: R-A0117

Condition: good (used), Tailstock Taper size: MK 2 Quill travel: 30 mm Height-adjustable Center height of 250 - 285 mm Tiltable from -5 degrees to +15 degrees Base area: 230 x 155 mm Weight: 27 kg Dkedpfxedlp Txo Ak Ajw

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dodpfx Aevxhfmjk Aekw Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg