Seasoner

Heat and Control Fastback In-line Seasoner

Condition: new, capacity 350 l/h dimensions: length 600 mm width 500 mm height 1 600 mm weight 30 kg material 1.4301 / AISI 304 suitable for: Iedpfx Aajb Nuv Aoaotp hot filling of fruit an vegetable juices into bottles 0,25 - 2 l

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own) Isdpsf Epznefx Aaajtp

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting Itedpfx Aajfgyh Ueaop • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, NEW ! Isdpfxowigiks Aaaetp PLC control with 50 programs loading : max. 160L with vacuum pump “Busch” 21m³ 2,3 kW weight 380 kg dimensions (l x w x h) : ± 1.320 x 1.380 x 1.540 mm adjustable speed from 2 up to 9 rpm a wide variety of products like: all kinds of salads, meat and fish, can be mixed / tumbled with the Bartumb.

Condition: used, Year of construction: 2006, cutting diameter / mm Itjdpjuia Rkefx Aaaep saw band length / mm table height / mm BEHRINGER band saw in very good condition with heavy-duty roller stand, loadable up to approx. 50 tonnes. The machine is equipped as standard with infinitely variable cutting speed control, so that universal sawing of all materials with low and high strength is achieved. Type HBP650-1204A Machine number 706537 Year of construction 2006 Dimensions 10,000 x 67 x 1.6 m Working range round 20 - 650 mm Working area square min. 20 x 20 mm Working area square max. 1,200 x 600 mm Cutting speed 10 - 110 m/min. Remaining piece length automatic mode approx. 90 mm Remaining piece length manual approx. 10 mm Motor power saw drive 9.2 kW Motor power hydraulic pump 5.5 kW Voltage 400 V, 50 Hz Connected load approx. 16 kW Current consumption approx. 33 A Material support height 800 mm incl. documentation

Year of construction: 2017, condition: refurbished (used), Features and benefits: • Processes up to 30 pieces/minute • Adjustable peeling depth using ABL patented peeling system • Self-adjusts for different fruit shapes/types • High yield rate: 50% and up on fully peeled fruit • Reliable and robust performance for industrial and non-industrial processes • Maximizes productivity while reducing production costs OP30 is a semiautomatic peeling machine for citrus (orange & grapefruit), kiwi and mango. The machine can be used to peel one fruit variety at the time or even two separate fruit since it is equipped by two peeling head. When processing citrus fruit or kiwi the speed rate is 30 fruit x minute , while the speed it’s reduced to 24 fruit x minute when processing mango. Fruits are positioned manually into the feeding cups by one operator, if processing citrus a coring option is also available. Two self centering hand will center and transfer the fruit between two mandrels , these will put in rotation the fruits to allow their peeling. The ABL patented peeling head will gently perform the peeling following the fruit shape according it’s dimension with the possibility to adjust the peeling depth also with the machine in function. Once peeled two blades will remove the two extremity (not for mango) and then release the fruit Itjdpfjpv Uz Njx Aaasp onto the peeled fruit conveyor. serial number: 201, year of construction: 2017, weight 1550 kg, 415 V, 50 Hz, 4.0 kW, total dimensions: 2650 mm x 1700 mm x 2100 mm. We have three machines. All are refurbished with new PLC and electronics.

Condition: not inspected (used), Pouch making machine for liquids, hot or cold fill. Ideal for packing Soups, Sauces, Condiments (Ketchup, Mustard, Mayonnaise), Salad Dressing, Tomato Based Products (Pizza Sauce, Spaghetti Sauce), Liquid Eggs. Itjdpfxjig Ht Io Aaaep We have two identical machines here from the same sauce factory. Many other machines including kettles, sauce coolers, glycol chillers etc.

Year of construction: 2012, condition: used, pasteurizer with pipe heat exchanger 600 l/h (up to 80°C) Iedpfx Aaj Hnnheastp with automatic control storage tank for BiB with level control BaginBox filler with flow meter oil boiler 50kW mounted on braked trailer with tarpaulin max. weight: 1350 kg

Year of construction: 2024, condition: new, Bath pasteurizer option is the perfect solution for post fill pasteurization of your bottled or canned products. 97 units of standard 0.75 L bottles easily fits in 4 baskets.  Our bath pasteurizers can be produced in two options: 1. Autonomous bath pasteurizer with electric heating elements and integrated control panel. 2. Bath pasteurizer as an option together with HEAT or ECOHEAT pasteurizers. Then water heating is done with our pasteurizer and the same control panel is used for controlling both devices. Features: Mounted on pivoting wheels. Insulated heating bath to save the energy and temperature. Can be used for glass bottles, jars, cans, any other heat resistant package. Works with different products, like juices, jams, marmalades, puree, sauces, etc. Automatic temperature and time control. Water overflow protection. Fast and easy loading and unloading of bottle trays. Entirely made of stainless steel. The bottles, cans, or jars are loaded into the trays and then trays are loaded into the bath. The desired pasteurization temperature and holding time settings can be set simply using the integrated control panel or on the HEAT or ECOHEAT pasteurizers. At a start of process, bottles or jars are placed into the bath, then water is filled into the bath until it reaches bottle neck. Then pasteurizer is connected, temperature (max 90 C⁰) and time is set. Then it starts to heat up the water inside the bath. When set temperature is reached, timer turns on and pasteurization is started. In the meantime, in the new set of trays filled bottles can be loaded for a faster exchange process. When timer ends, water out of the bath pasteurizer is released and bottles are unloaded. Itsdpsrif Smjfx Aaaep As the temperature is only measured in the bath, it is important to monitor the core temperature of your product to ensure that adequate pasteurization has been achieved.

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH Ijdpfx Aajfc I Hajaetp More technical details you found in the Datasheet.