Wide belt sander

Heesemann FGA8

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing Fgjdpfxowzzivs Apwjf - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: good (used), Year of construction: 2011, Internal flange dimensions 2340 x 1340 mm Maximum panel dimensions (20mm thickness) 2340 x 1240 mm Working chamber height 60 mm Total thrust 300 t Maximum specific working pressure 5 kg/cm2 Fsdpfxjtwba Ss Apwegf Press cylinders No. 6 diam 140 mm stroke 250 mm Lower moving platen (closing movement from bottom to top) Opening between press platens 230 mm Side load 1400 mm Pvc roller uncoiler Double loading table

Condition: used, functionality: fully functional, working width: 3,000 mm, HOT PRESS MANNI - Platen dimensions 3000x1300 mm - N. 6 cylinders - Boiler with hot water - wooden waste Fgjdpfsx Rqtijx Apwof

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm Fodpeu R Szajfx Apwsgf - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turn-over device * 2 tables with automatic variable pin system * With Teflon coating for pre-glued foil * Foil laying system for the pin table (pre-glued foil) Fgedsxbcudjpfx Apwof * Heating plate size: 2800 x 1500 mm * Maximum workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil paternoster storage, 3.2 m height with 14 suspension rods * Siemens S7 PLC control * Operator panel for PLC control: SIEMENS TP 270 (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Maximum chamber pressure: 6 bar * Maximum press opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40 / 60 mm * Max pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar

Condition: used, Year of construction: 2004, machine/vehicle number: 02919475, - Manufacturer Cefa - type. KLEENSPRAY - Year of construction 2004 - Operating side left - Working width 1.200 mm - Working height 900 mm + - 20 mm - Gun drive single version - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed 1.5 - 7 m/min - PLC control with touch screen - Number of spray guns installed 0 pcs. - Height-adjustable spray guns - Number of paint pumps 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length 4,450 mm - Width 3,360 mm + 1000 mm - Height 2,600 mm - Total connection ~ 7.1 kW / 28.6 A - Volt, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5 _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us! Fgodpfev N D Ewsx Apwef

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. Fgedjzb Iggopfx Apwef SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Fedpfx Aowu Ackopwogf Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air Fsdpfsychqzjx Apwjgf 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Fsdpfx Apsx Ey H Iowegf