HELLER MC 16

HELLER MC 16

Condition: used, Year of construction: 1999, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm control: Unipro 90 Gjdpfx Amoy Rmk Royjit Pallet changer 2x: 400 x 500 workpiece - installed height: 800 mm max. clampable workpiece diameter: 720 - 850 mm spindle taper:: SK 40 spindle turning speed - stepless: 10 - 8000 1/min Spindle power: 20 / 30 kW Spindle Torque: 95/143 Nm tool magazin:: 80 SK 40 total power requirement: 55 kW weight of the machine ca.: 11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 - coolant device with coolant through spindle 7 pressure levels - full A & B-axis - chip conveyor *

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 Gisdsx Hn D Dspfx Amyjt - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 48 kVA, torque: 143 Nm, controller manufacturer: SIEMENS, controller model: 840D power line, workpiece height (max.): 800 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, total height: 3,700 mm, total length: 6,500 mm, total width: 3,300 mm, table width: 500 mm, table length: 400 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (min.): 45 rpm, spindle speed (max.): 16,000 rpm, coolant supply: 70 bar, spindle motor power: 30 W, number of slots in tool magazine: 80, tool length: 320 mm, tool diameter: 150 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HELLER MCi16 840Dpl • Year of manufacture: 2000 • Tool holder: HSK63 • Max. tool length: 320 mm • Chip-to-chip time: 2.8 s • Spindle power: 40 kW • Spindle speed: 45 - 16,000 rpm • B-axis: NC axis (360,000 x 0.001) • Travel X, Y, Z: 630 mm • Rapid traverse speed X, Y, Z: 40 m/min • Feed rate X, Y, Z: 40 m/min • Feed forces X, Y, Z: 10,000 N • Acceleration: 7 m/(s²) • Pallet changer: double (change height 800 mm) • Magazine: chain magazine with 80 positions • 2nd control panel at magazine loading station • Hydraulic workpiece clamping • BLUM touch probe receiver • Interface for 5th axis • SIEMENS PCU • KNOLL VFR (vacuum rotary filter) system and chip conveyor • Coolant chiller unit • Oil mist extraction The machine has been used exclusively for finishing aluminum components and is being removed from production due to capacity reasons. Our company specializes in HELLER machine tools, and the above-mentioned machine has been serviced by us in recent years. Gsdpfx Amey Rn H Heyjit A condition assessment was performed on-site and can be provided upon request. The spindle’s tool clamping system was replaced in 2025. The result of the machine geometry measurement will be provided as soon as available. The machine can be inspected under power by serious prospective buyers by prior arrangement. Location: 72379 Hechingen, Baden-Württemberg, ex works

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: 840C, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 40, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and is equipped with a tool magazine that holds 40 tools. The machine also includes a twin pallet system for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. Gisdpey H D Rmofx Amyjt • Twin pallet (2-station pallet changer) Technical Specification Taper Size SK 40

Condition: used, Technical characteristics: HORIZONTAL MACHINING CENTER Giodpfj Dvlxox Amyot AUTOFEED 8 PALLETS 140 TOOL ISO50

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. Gisdpfjx D I Alsx Amyot

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 16,000 rpm, This HELLER MC 16 with pallet pool was manufactured in 1999. It features a Control Uni Pro system, a 120-tool magazine, and an HSK-63A tool holder. The spindle operates at a speed of 16,000 rpm. Consider the opportunity to buy this HELLER MC 16 horizontal machining centre. Contact us for more information. Giedox D Iz Uspfx Amyet

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Gedsx Hn D Repfx Amyeit Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: used, Year of construction: 2002, x-travel 630 mm y-travel 630 mm z-travel 630 mm Control Siemens type 840 D size of pallet 400x500 mm numbers of pallets 4 360 ° turning speeds 10-16000 U/min Tool changer 160 Pos. spindle taper: HSK 63 total power requirement 55 kW weight of the machine ca. 11 t Machine with Siemens 840 D control for 4 axes Giodpfx Aoyqt Axsmyjt - Digital drive technology, direct position measuring systems - 4-position pallet changer - Full B-axis - Coolant system with internal coolant supply - Hydraulic workpiece clamping - Filtration system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1998, Travel X/Y/Z: 630mm/630mm/630mm, B-axis: 360°, B-axis resolution: 0.001°, Tool holder: SK40, Tool positions: 160, Pallet positions: 6, Pallet dimensions X/Y: 400mm/500mm, Rapid traverse: 40m/min, ICS pressure: 50bar. Machine dimensions X/Y/Z: approx. 5850mm/2500mm/2750mm, Weight: approx. 12500kg, Control: Siemens Sinumerik 840D. Including Blum probe and drill breakage control. Documentation available. An on-site inspection is possible. Giodpfsxmkb Nsx Amyot

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Travel paths X/Y/Z: 630/630/630 mm 2-fold pallet changer Spindle speed: 10,000 rpm Knoll coolant system with paper band filter Tool holder: SK40 Tool magazine with 80 stations Gijdpfx Ajxy S Ausmyst

Condition: used, Year of construction: 1999, machine/vehicle number: 31-43487, Heller MC16 – Year of manufacture: 1999 Spindle speed (rpm): 45-16,000 SK40 Travel range (mm): X – 630, Y – 630, Z – 630 Rapid traverse (mm/min): 1-40,000 Gisdpswfd Euefx Amyjt Number of tools: 80 Tool diameter (mm): 70/150 (with adjacent free tool stations) Tool length (mm): 320 Number of pallets: 2 Pallet dimensions (mm): 400 x 500 Max. pallet load (kg): 500 B axis: NC Control: Sinumerik 840D Heidenhain probe: Yes Power (kVA): 60 Machine no.: 63

Condition: used, Year of construction: 1999, machine/vehicle number: 31-43414, Heller MC16 No. 31-43514, Year of Manufacture: 1999 Spindle Speed (rpm): 45-16000 SK40 Travel paths (mm): X 630 / Y 630 / Z 630 Gedpfx Amjwffd Soyjit Rapid traverse speed (mm/min): 1-40000 Number of tools: 80 Tool diameter (mm): 70/150 (with free adjacent slots) Tool length (mm): 320 Number of pallets: 2 Pallet dimensions (mm): 400 x 500 Max. pallet load (kg): 500 B axis: NC Control: Sinumerik 840D Heidenhain measuring probe: Yes Power (kVA): 60 Machine No. 64 ATL iTM400HP No. 14916, Year: 2009 Power (kVA): 30 Deburring chamber: Standard 400 / 400 mm Max. gas filling pressure: 20 bar Siemens Multipanel with Windows CE operating system

Condition: used, Year of construction: 1999, Technical details: x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 15,2 t Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Gisdewdywqjpfx Amyet Service and maintenance intervals were adhered to *

Condition: used, Year of construction: 2002, Technical details: Gjdpjvgmiyjfx Amysit x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm pallet size:: 400 x 500 mm spindle taper:: HSK 63 spindle turning speed - stepless: 10 - 16000 U/min total power requirement: 55 kW weight of the machine ca.: 11 t Machine with SIEMENS 840 D control for 4 axis - digital drives - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping *