Plastcompactor system

HERBOLD HV 70/250

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) Dcsdpfx Afeu Ekfmjnjc • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Year of construction: 1991, It is almost better than a new one. The machine has been completely overhauled and is equipped with a PLC, enabling fault monitoring and advanced control functions. A power meter is also installed. The system stops automatically after a set time when it is empty, so there is no need to switch it off manually. Once the machine finishes crushing, it shuts down automatically. If the shaft becomes too difficult to rotate, the press stops applying pressure while the rotor continues to rotate. Once the shaft can rotate freely again, the machine automatically resumes pressing. This makes the crushing process significantly more economical and reduces unnecessary wear on components. If the load does not decrease, the press retracts. If the load still does not drop, the crusher shuts down and indicates an overload, preventing damage and further wear. Waste Crusher For shredding particleboard and solid wood waste, drive power 18.5 kW, throughput 1000 kg / h for chipboard waste, 350 kg / h for solid wood waste, Dcedpfxet Dh T Ds Afnsc screen diameter 25 mm, rotor diameter 235 mm (circle), width 1070 mm, 120 rpm, feed unit : Sectional steel construction , driven by hydraulic cylinders, in plastic guide rails, laterally with rollers, main drive E-motor with turbo coupling, V-belt drive, 2-stage helical gearbox, motor rated power 18.5 kW, rated current 36.5 A, 1455 rpm, 400 V, 50 Hz, Degree of protection IP 54, Type B 3, V-belt pulley Turbo clutch D 1 = 200 mm, V-belt pulley Drive D 2 = 200 mm, Number of V-belts Z = 3 pieces, V-belt Effective length LW = 1900 mm, center distance ENOM = 635.84 mm, Door length L = 635.84 mm, impression depth EA = 23.35 mm, test force per V-belt F = 75?, Turbo coupling: hydrodynamic coupling, load-free starting of the electric motor, overload protection, hydraulic ic unit: Compact unit with 2 operating speeds, drive power 1.0 / 1.4 kW, drive pressure max. up to 180 bar, extraction nozzle: minimum air velocity V = 28 m / s, inlet length 1200 mm, inlet width 1050 mm, Bst Ijt Dh T De H Excolc waste shredder with universal rotor- dimensions in mm: approx. 6500 x 2700 x 3600, weight in kg: approx. 2300, Machine quality: fully operational after maintenance.

Condition: excellent (used), Free-standing aluminium silo on foot ring (previously used as a milk powder silo) – used – designed for a bulk density of 0.65 kg/dm³ Volume: 94,000 litres Manufacturer: P+W Metallbau Dcedpfoi E Hnysx Afnjc Quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,000 mm Material: AlMg3 Bulk density: 0.65 kg/dm³ Upper head roof pitch: 15° Equipment and connections: Upper head: 1 x access manhole DN 600 with cover 1 x vent nozzle DN 300 with hood 4 x flange DN 100 2 x flange DN 150 Shell: 1 x access door, approx. 850 x 2000 mm with ventilation slots 1 x flange DN 50 for sensor probe 6 x pipe holders for fill pipe (fill pipe not included) 6 x brackets for access ladder (ladder not included) Various pipe penetrations in the area of the lower supporting ring The silo has a 60° cone at the bottom with a vibrating floor (DN 1500). The currently installed measuring and control technology is included in the price, but no warranty is given for its functionality! Otherwise as per images and drawing.

Condition: good (used), Year of construction: 1989, Shredder +press +conveyor belt+silo complete Dcjdpsr Dvdkjfx Afnjc

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 500 h, machine/vehicle number: 22-014, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Dcodpfxsqabm Ee Afnjc Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Dcedpfx Afjurvzrenec Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Condition: new, - Engine power 7,5kW - cutting force 20to Cutting channel designed for - max. roll length 1100mm - max. roll diameter 900mm - machine weight approx. 2500kg - tank capacity approx.100Liter - hand guard in the area of the control panel and opposite to it -colouring of body RAL according to customer's request protective grid/knife bar RAL 1028 melon yellow Ordered goods Price and further information on request Djdpfx Afeftnt Nenocc

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm Dcsdpjt Tvk Asfx Afnoc 22 kw motor with discharge auger

Condition: new, Year of construction: 2022, Shredder 630 motor: 18,5 kW; 400 V - 50 Hz - 3 ph Dcjdpfx Afeku Abijnec knives: 30 pieces concave, multiple rotatable rotor diameter: 260 mm Rotor design: EcoRings Control system: PLC Siemens S7-1200 cutter opening 630 x 820 mm filling volume approx. 0,6 qbm screen perforation: 10 - 12 mm Suction nozzle Ø 160 mm

Year of construction: 1995, condition: excellent (used), 1 x Free-Standing Silo Manufacturer: Stanelle Year of Construction: 1995 Diameter: 3000 mm Total Volume: 84 m³ Usable Volume: 70 m³ Total Height: 17.53 m Internal Pressure: +45/-5 mbar Material: ST 37-2 Total Weight: Approx. 12 tons Bulk Density: 600 kg/m³ Venting Filter: Infra-Jet AJN 204 (20 m²) Filling Line: DN 100 Pressure Equalization Valve: DN 150 Door: 850 x 2000 mm Dcodpfxov Nri Rj Afnec Folding Ladder with Rest Platform !! All structural design verifications available!! Vibrating discharge floor: Ø 1500 mm Material: Stainless steel 1.4301 Conical floor inclination: 50° Unbalanced vibrator JV 102-14 (0.45 kW) Slide valve: MFA DN250 Housing: Aluminum Slide plate: 1.4301 Aeration strip: Promelt V fluid strip 1250 x 125 Flap lock DN250 (200 liters) Material: Steel Max. 0.5 bar Dosing hopper: Screw pre-hopper 700 liters Dimensions: 1615 x Ø800 mm Material: Steel Max. 0.5 bar Dosing screw: DN100 SEW gear motor: 1.5 kW (25 rpm) Agitator drive: SEW 0.55 kW Various level sensors, Endress Soliphant FTM 930/931 vibration level switch Vegaflex 62 Vega probe Coating new in 2023 Substrate preparation: sandblasted Color manufacturer: Shervin-Williams Primer: ZG64 solvatic 2K EP primer, sand yellow, RAL 1002 Topcoat: ZD27 solvatic PU topcoat, cream white, RAL 9001 ! ! ! The parts list is attached directly below as a PDF! ! !