Used Romania for sale (622)

Condition: good (used), Electric motor, three-phase motor -Manufacturer: EP Romania, electric motor type MA24F165S-2 -Power: 1.5 kW -Speed: 2855 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection rating: IP44 -Dimensions: 295/200/H220 mm Dwodpfx Apopu Itfewsa -Weight: 18 kg

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Dwedecrd Nmopfx Apwea Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm

Condition: ready for operation (used), Year of construction: 1984, Romanian Hot Former AMP 20, AMP 30, AMP 50 lines Dsdpfxotaui Us Apwowa Press Capacity: 220 tons, 230 and 400 Forming stations: 3, 3 and 4 Forming load: 900 kN, 2500 kN and 8000 kN Bar Diameter: 14 to 28 mm, 18-40, 28-55 mm Max. part outer diameter: 35 mm Cut-off length: 15 to 40, 20-72, 50-150 mm Ram stroke: 110 mm Ejector stroke: 55 mm Die center distance: 110 mm Production per minute: 12 to 180 Weight: approx. 11, 36 and 90 tonnes Technical documentation: yes Video under power available

Condition: ready for operation (used), Romanian Lathe SN 1800x3000 Manufacturer Uppetrom 1 MAY Chuck diameter 1800 mm Max swing over bed 1800 mm Length between centers 3000 mm Dwedpfx Apjv Uaufowea Max swing over slide 1450 mm Max weight of work piece between centers 25,000 kg Movie with machine underpower available

Condition: ready for operation (used), Romanian Slotters MH500, M 320 And M 200 Stroke 500mm, 320mm and 200mm Dwodpfstz S Hcex Apwoa

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, Dedpfou Nad Tjx Apwswa labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 300 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: electric, total height: 2,275 mm, total length: 4,060 mm, total width: 3,315 mm, overall weight: 1,700 kg, Equipment: documentation/manual, The 2128 PANA ATC is a next-generation DANIBRUM CNC router, designed for modern workshops and manufacturing facilities seeking high productivity, consistent precision, and efficient automation in a single, fully integrated machine. Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine offers rapid tool changes and extended flexibility for processing a wide variety of materials: particle board, MDF, solid wood, plastics, Alucobond, and composites. Dwodpsymcncofx Apwoa The robust machine frame is supported by 25 mm linear guides, helical rack and pinion drives M1.25, and 750 W servo motors, ensuring fast, smooth movements and precise positioning across all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, allowing fine speed adjustment and stable performance under load. The result is a reliable, fast, and versatile CNC router, tailored to the current demands of furniture production and industrial processing.

Condition: used, According to our "General Terms and Conditions of Business" and without any guarantee or warranty, we are pleased to offer you the following vehicle today, subject to prior sale, errors, and typing mistakes: Craiova IH Wheeled Excavator Year of manufacture: 1978 (estimated) Hydraulic stabilizers front and rear (2 each) Engine runs Hydraulics must be filled with oil and made operational, but are functional Dodpfx Apjzk Srwowowa Rotary servo 2 clamshell grabs Rotes Banner Döbeln, manufactured in 1974 Tyres 60-80% Rear axle steering Front axle drive Price: € 5,500.00 (VAT not deductible) All details provided without any guarantee or warranty. Our General Terms and Conditions of Business apply. The place of jurisdiction for both parties for disputes up to a value of € 50,000.00 is the Amtsgericht Ludwigslust; for disputes above this value, the Landgericht Schwerin. Subject to prior sale, errors, and typing mistakes.

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Dedjy Ud N Sopfx Apwswa Weight approximately 87 tons Video showing the machine in operation available!

Condition: ready for operation (used), VTL SC 14 cc Dodpfx Ajg D Hv Iepwjwa Chuck diameter 1200 mm Max turning 1400 mm Max height of workpiece 1000 mm Aprox weight 16.1. to

Condition: used, Used plant for production of both wet and dry CuSO4 Copper Sulphate with capacity of 1000 metric tons / month (approximately 12000 TPM). Plant was built in 2001 and shut down in December of 2024. Dwedpfx Apezmahlewja Plant includes: - Equipment for production of wet technical grade copper sulphate; - Equipment for production of feed grade dry copper sulphate. The plant can produce up to 1000 TPD of wet crystals or 1000 TPD of dried product, or a combination of the 2 products, e.g. 300 TPD of wet and 700 TPD of dry. Equipment includes (2) Krauss Maffei pusher centrifuges and a Comessa Romania rotary dryer. Full equipment list available on demand.

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: 16 Bar Version Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Dsdsy Ecuzopfx Apwjwa Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Technical Specifications: Model: Impact 20Bar Working Pressure: 20 bar (1.98 MPa, adjustable) Dsdoy Ecu Uspfx Apwewa Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 133, product width (max.): 270 mm, working width: 270 mm, type of input current: three-phase, Equipment: documentation/manual, Semi-rotary flexographic printing machine MALBATE Mecaformat 270. 5 printing units + 1 varnish unit + rotary magnetic die-cutting unit. UV drying – 6 drying units. Compressed air: 7/8 bar. Maximum web width: 270mm Minimum web width: 150mm Maximum feed length: 220mm Minimum feed length: 50mm Dwjdpfx Ajyr R Sgepwea Maximum printing width: 260mm Maximum printing length: 305mm Maximum length of the semi-rotary cutting die: 220mm Maximum permissible unwind roll size: 3000m Unwind roll diameter: 800mm Rewind waste roll diameter: 450m Rewind roll diameter on the automatic splicer (AS): 360m Maximum speed: 10,000 impressions/hour The machine is currently in production. An inspection can be arranged by appointment. Details are available in the PDF file. For further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2017, functionality: fully functional, workpiece height (max.): 60 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, Equipment: documentation/manual, We offer this Format4 Tempora 60.12 edge banding machine, used, manufactured in 2017. Manufacturer: Format4 Model: Tempora 60.12 Year of manufacture: 2017 Dwedpoztmbrofx Apwoa Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete Abrasive Belt Production Line for Sale – Excellent Condition (2024) Complete Abrasive Belt Manufacturing Line – Ready for Production We are offering for sale a complete abrasive belt production line, purchased new in April 2024 from iSharp China. The equipment is in excellent working condition, has been professionally maintained, and is available immediately. Equipment included: Cutting to Length Machine Skiving Machine 2 × Abrasive Belt Presses 4 × Slitting Machines Abrasive Disc Punching Machine Portable Forklift Working tables and accessories Suitable for manufacturing: Abrasive sanding belts Wide belts Dodpezrzk Ejfx Apwewa Narrow belts Custom-sized abrasive belts Abrasive discs Advantages: Complete production line Excellent mechanical and cosmetic condition Low operating hours Ready for immediate production Ideal for companies looking to expand production capacity or start abrasive belt manufacturing The original purchase value of the machinery exceeded USD 100,000 (excluding shipping and import costs). Location: Oradea, Romania The machines can be inspected under power by appointment.

Condition: used, functionality: fully functional, fuel type: electric, Year of construction: 2007, Comansa 10CL140 flat-top crane - Available from October 2026; currently, the crane is in operation on a construction site in Brasov, Romania. - In very good working condition; all maintenance performed on time; steel cable replaced in 2025. - Year of manufacture: 2007 - Jib length: 51.6 m - Tower height: 40.6 m - Maximum lifting capacity: 8 tons with 4 ropes at a radius of 17.7 m - Nominal lifting capacity: 2.1 tons with 2 ropes at a radius of 55 m - Electrical power: 35 kW Dwsdpfjzr Utgex Apwja - Ground-level control, radio remote control - Tower element dimensions: 1.6 x 1.6 m

Condition: excellent (used), Year of construction: 2009, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: SL-25T, Marunaka SL 25 T, with conveyor belt + knife sharpening machine, price and further details available via email. Dedpfx Apjzruhwowewa

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: -, overall weight: 960 kg, fuel type: diesel, tank capacity: 90 l, color: light grey, output current: 43 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 24 kW (32.63 HP), nominal power (apparent): 30 kVA, continuous power: 21.6 kW (29.37 HP), continuous power (apparent): 30 kVA, total length: 2,270 mm, total width: 960 mm, total height: 1,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: CUMMINS, type of cooling: water, genset 33 kVA, 400 VAC Dodpewyvcuofx Apwjwa

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: -, overall weight: 900 kg, fuel type: diesel, tank capacity: 130 l, color: white, power: 42 kW (57.10 HP), output current: 54 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 33 kW (44.87 HP), nominal power (apparent): 41 kVA, continuous power: 30 kW (40.79 HP), continuous power (apparent): 38 kVA, total length: 2,200 mm, total width: 950 mm, total height: 1,250 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: YUCHAI, type of cooling: water, genset 42 kVA, 400VAC Dwsdpfx Aoua Dc Sjpwea

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: -, genset 33 kVA, 400 VAC Dwjdpfsua Db Iex Apwja

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: -, overall weight: 990 kg, fuel type: diesel, tank capacity: 90 l, color: light grey, output current: 43 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 32 kW (43.51 HP), nominal power (apparent): 41 kVA, continuous power: 29 kW (39.43 HP), continuous power (apparent): 30 kVA, total length: 2,270 mm, total width: 990 mm, total height: 1,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: CUMMINS, type of cooling: water, genset 33 kVA, 400 VAC Dwsdpswyvfijfx Apwsa

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: -, TECHNICAL DETAILS: Total weight: 900 Kg Fuel type: Diesel Tank capacity: 130L Color: white cream Power: 22.5 KVA (18kW) Stand-by Output current: 28.9 A Dwjdpfx Apoua A R Iswoa Output voltage: 400 VAC Guobni T Dveua A R Is Sjd Output frequency: 50Hz Power factor: 0.8 Output current type: Three-phase Total length: 2200mm Total width: 950mm Total height: 1250mm Motor speed: 1500 revolutions per minute Motor manufacturer: YUCHAI Model: YCV2.5N35-G20 with electronic speed regulator Cooling type: water Alternator: WATTEK model WHI184E, 50Hz/3 phase/400Vac/Insulation: H/

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 960 kg, fuel type: diesel, tank capacity: 120 l, color: white, output current: 51 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 28 kW (38.07 HP), nominal power (apparent): 35 kVA, continuous power: 25.6 kW (34.81 HP), continuous power (apparent): 32 kVA, total length: 2,250 mm, total width: 960 mm, total height: 1,250 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: RAYWIN - Stage V engine, type of cooling: water, Stage V emission genset Dwodpfxowzil Sj Apwja

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for the production of pellets from plant residues (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Weight kg: 6800 Dimensions mm Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (plant residues) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Dwodpfx Aoztaahepwja Length mm: 40 If you have any further questions or require additional information, please do not hesitate to send us a message or call us.