5 axis vertical machining center

Hermle C 250 U

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Djdoq R Tkwspfx Apwowa Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Condition: Used, very good, still in production Operating hours: 26,290 h Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm A-axis: +30° to -120° C-axis: 360° Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Tool holder: HSK 63A Through-spindle coolant: 18 bar Dwjdpfoymc Ngjx Apwja Height: 3295 mm Width: 3200 mm Length: 4585 mm Weight: 13500kg

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 Dsdpfxewugczs Apwswa 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2021, operating hours: 4,236 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-MB5, workpiece height (max.): 450 mm, workpiece diameter (max.): 550 mm, workpiece weight (max.): 400 kg, total height: 2,900 mm, total length: 3,400 mm, total width: 2,700 mm, table load: 400 kg, rotary table diameter: 500 mm, overall weight: 7,500 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,102 h, coolant supply: 70 bar, distance table center to spindle nose: 550 mm, spindle motor power: 11 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 75 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 5-axis vertical machining center with FANUC CNC, optical scales on the x-y-z axes, 60-place tool magazine and 70 bar pump and TS27R tool pressure probe + MP60 probe Dedpfxozfp U Eo Apwswa

Condition: good (used), Year of construction: 2007, functionality: fully functional, DMG DMU 50 3+2 axes SPINDLE overhauled 01/2026 Control system: Heidenhain iTNC 530 Hours: 11,275 program hours x-axis travel: 500 mm y-axis travel: 450 mm Dedoza T A Djpfx Apwjwa z-axis travel: 400 mm Control system: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 – 10,000 rpm Tool holder: SK 40 DIN 69871 Table surface: 700 x 500 mm Max. table load: 500 kg T-slots: 7 x 14 x 63 mm Number of tool positions: 30 Max. tool weight: 6 kg Rapid traverse rate: 24 m/min Feed force: 4.5 kN Feed rate: 1 – 24,000 mm/min Total power consumption: 26 kVA Machine weight: approx. 4.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Chip conveyor Handwheel Measuring probe Coolant gun Available immediately

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Dodpfxoyuzg Hs Apwowa Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: used, Year of construction: 2012, machine/vehicle number: DK25P, Dear Sir or Madam, We offer the following: Nominal capacity: 20 m³ Used, refurbished (ground, primed, and painted according to customer's color choice) Includes manufacturer's/test certificate DIN 6616-D. Material: S235JRG2 steel in steel Double-walled tank for above-ground installation, suitable for locations outside earthquake/flood zones. Shape: cylindrical, with saddle supports Tank dimensions: Length: approx. 6,840 mm, Diameter: approx. 2,000 mm, Weight: approx. 3,500 kg Color: RAL paint, according to customer's specifications Equipment: - Filling pipe 3" with TW closure (filling cap) - Suction pipe 1 ¼" - Dipstick and dipstick closure, tank content indicator Djdpfocl Sfbjx Apwewa - Vent with cap 1 ½" - Limit switch with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately Diesel pump Cube 70 70 l/min Delivery hose 4 m / extendable Motor: 0.5 kW, 230 V, 4.2 A Includes tank support, pipelines, ball valve and non-return valve, installed. Optional: 80 l/min diesel fuel dispenser with data recording +++++ Of course, you can also customize your tank system! We will gladly implement your color and equipment preferences to the best of our ability. All our systems are extensively inspected and checked by selected employees in our company. We also offer an affordable delivery service upon request. Inspection of our systems is possible at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. We also purchase existing tank systems at any time. Trade-in of existing systems is possible. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-620, total height: 2,500 mm, total length: 3,600 mm, total width: 2,500 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED "DOOSAN DNM 4500" vertical machining center with Heidenhain TNC-620 CNC Dsdpfsw D Dy Nox Apwewa

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw Dedpfem E I D Hsx Apwowa turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Dwodpsiryyasfx Apwsa Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.