Milling machine

Hermle H 2

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp Dsdpfxezi Duhe Ak Aecp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: new, cutting diameter 225 mm saw band length 2455 mm table height 850 mm cutting width 245 x 150 mm cutting speed 45/90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 90 mm 90 mm 145 mm Impact energy 145 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,2 t dimensions 1,43 x 0,72 x 1,7 m Miter band saw Dcedpfx Aegxi D Tjk Aep -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,300 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, gearing type: automatic, battery voltage: 80 V, battery weight: 1,580 kg, fork length: 1,150 mm, tire condition: 95 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 6,400 kg, total height: 2,200 mm, Equipment: cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, For sale: Used Toyota electric forklift, type 8FBMT 35, year 2018, with triplex free lift mast! Overall height: 2.2 m Lift height: 4.7 m Load capacity: 3,500 kg Solid rubber tires, 95% Hydraulic sideshift Fork length: 115 cm Includes charger Both drive motors and the rear axle have already been overhauled on the forklift, and the battery has also been replaced! Forklift is immediately available! Forklift is ready for immediate use! Forklift can be inspected and test-driven at our premises! Transport can be organized on request! Dcedpexzr E Eefx Ak Ajp

Condition: used, Year of construction: 2008, x-travel 400 mm y-travel 300 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 40 - 2.000 U/min table-size 750 x 320 mm feeds -stepless- 10 - 380 mm/min rapid traverse 1.200 mm/min power capacity 2,2 kW quill stroke 80 mm voltage 400 V total power requirement 4,7 kW weight of the machine ca. 1,1 t Dcjdpfx Akjxa Hf Ro Ajp dimensions of the machine ca. 1,15 x 1,40 x 1,85 m - Serial-No.: 148373 - 3-axis digital display - Horizontal milling device - Milling head swivels ±45° - Coolant device

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm Dcedpeqpl Uujfx Ak Ajp turning speed range 40 x 2000 U/min spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Dcedpehakfasfx Ak Aop Condition: USED Year: 2003 Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm Dcedpfx Akju Ngybe Aop - control panel i.D. *

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm Dcodpotqqrfsfx Ak Aep feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Dcodpeyu Nb Eefx Ak Asp Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg

Condition: new, Year of construction: 2026, functionality: fully functional, Swing over bed 710 mm Swing over cross slide 420 mm Swing in gap 910 mm Gap length 357 mm Dsdpeyt Ihnofx Ak Aecp Center height 250 mm Center distance 2000 mm Bed width 450 mm Speed ​​10 – 1600 rpm Cutting tool diameter 32 x 32 mm Spindle bore D73.5 mm Drive power 5.5 kW Tailstock sleeve D90 mm Tailstock sleeve travel 180 mm Tailstock taper Morze 5 Weight approx. 3250 kg Dimensions L x W x H = 3500 x 1100 x 1850 mm Accessories, Equipment - 3-axis indicator system - Chuck guard - 3-jaw chuck D250 mm - 4 Chuck diameter 300 mm - Tool holder guard - Long slide stop - Steady rest - Traveling steady rest - Standing center - Reduced adapters for main spindle - Tailstock - Coolant system - 4-way tool post - Machine light - Rapid traverse on longitudinal and cross slides - CE Mark - Machine manuals