Mechanization for KVH and BSH production

HIT

Condition: used, Year of construction: 1992, functionality: unexamined, For sale a round log sorting line by Holtec. Equipped with a feeder for logs up to 16 meters long, a Cambio 66 debarker, a system for cutting logs into short logs, a Bruks feed reducer and 20 boxes for logs from 2.5 to 8 meters long. The line was dismantled about two months ago and transported to our site. Possibility of assembling and starting the line at the customer's - all elements are numbered. Very attractive price! Interested parties are invited to contact me Kodjv Iv T Dopfx Abbodw

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 231890, Timber drying kiln MÜHLBÖCK, complete with heat recovery system, model 1306. Depth: 4x120 cm, height: 3x120 cm, timber length: 5.20 m. Heating capacity: 225 kW. Flow temperature: 90°C. Water volume: 13 m³/h. Electrical connection power: 20 kW. Fans: 3x3.0 kW and 2x4.0 kW. Complete with control container.\n\nAdditionally, timber drying kiln VANICEK VF522/2D, year of manufacture 2000, complete. Heating capacity: 174 kW. Water temperature: 80/70°C. Water volume: 15 m³/h. Electrical connection power: 4.4 kW. Fans: 4x1.1 kW.\n\nBoth drying kilns must be dismantled by the buyer as soon as possible. Kdjdpfev Habiex Abbjw

Condition: used, Year of construction: 1989, machine/vehicle number: 1025, arm reach: 13,300 mm, load capacity: 2,300 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 1989 (factory overhaul 2007) Machine number: 1025 Track, m: 3.0 Crane type: OBX IV (year of manufacture 2007) Kedpfxsv Ddtks Abbsdw Reach: 13.3 m Load capacity without grab: 2,300 kg / 13.0 m Grapple: included Crane arrangement: behind the cabin Cab side: left Saw: 1.3 m Alpha Measurement: dividing aid with 2-level measurement Year of manufacture 2007 !! Sold on behalf of the customer!! Available from April 2025

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Kdjdpfxedy Hm Ns Abbew Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 160 m/min, controller manufacturer: Mircotec, workpiece length (max.): 5,500 mm, workpiece width (max.): 700 mm, workpiece height (max.): 100 mm, spindle motor power: 90,000 W, rotational speed (max.): 3,100 rpm, Automatic edging line BFB woodworking machines with Mircotec control. Year of manufacture 2004/2021. Maximum edging width 700mm, maximum edging thickness 100mm, 90kW drive motor. 4 adjustable saws. Included are cross conveyor in the basement, steep conveyor, cross-cut table, measuring/alignment, edger, splitter wedge, and board sorting. The line is fully functional and in good condition. Overhauled in 2021. Kjdpfx Absxfb Ecsbsdw

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Kjdpfetynpxjx Abbsdw Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: new, Year of construction: 2025, 🏆 Upgrade Your Sawmill with the Ultimate Wravor WRC 1250 AC Line! 🏆 🚀 Unmatched Performance – Precision Cutting – Maximum Efficiency 🚀 🔹 Complete Sawmill Solution – From log handling to final cutting, timber sorting, stacking etc. 🔹 Cuts Logs Up to: Ø 1250mm & length: adjusted to customer's demand 🔹 Fully Automatic & Hydraulic System on band saw WRC 120 AC – Fast centering, turning & clamping system on sawbed, full hydraulic equipment on sawhead 🔹 High-Performance Horizontal Band Saw with Sew drive with steel ropes for moving forward-backward, 🔹 Smooth & precise cutting 🔹 Integrated Multi-Rip Circular Saw 20-160 and/or 40-200/250 – Maximized lumber output 🔹 Heavy-Duty Log Loading & Sorting System – Seamless production flow 💡 Why Choose Wravor? Kdjdpfx Asv Id Tljbbow ✔️ High-Speed Processing for maximum productivity ✔️ Advanced Automation & Hydraulics ✔️ Minimal Waste, Maximum Yield ✔️ Proven Reliability – Sawmills Worldwide Trust Wravor! 📩 Contact Us Today! Get your customized sawmill solution with the Wravor WRC 1250 AC Line and boost your production!

Condition: excellent (used), Complete saw line with infeed,ARI SKR 600 reducer, ARI KS 122 Saw, ARI BKR 600 2:nd reduser, ARI DS 70 multi rip and ARI KT 52 eding line with full scanner Kedjikvl Rjpfx Abbodw Full bottom floor for waste handling All electrical cabinets and hydraulics

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line Kdsdpfowya Syjx Abbew with 1 x OptiCut 450 and F 100 feeding system with LuxScan CombiScan+ C 200 and curvature measurement The line was in operation until 2024, has been professionally dismantled and can be viewed.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 32 h, load capacity: 4,000 kg, lifting height: 6,000 mm, free lift: 1,715 mm, fuel type: electric, mast type: triplex, construction height: 2,730 mm, fork carriage width: 1,750 mm, fork length: 1,500 mm, empty load weight: 7,610 kg, total length: 1,900 mm, drive type: Elektro, construction width: 1,750 mm, Four-way Sideload Forklift Load center: 600 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tire type: Solid rubber Front tire size: 533x228mm Front tire condition: 80 - 100% Rear tire type: Super elastic Rear tire size: 710x318mm Rear tire condition: 80 - 100% Battery volt: 72V Battery Ah: 775Ah Battery manufacturer: GNB Industrial Power Battery year: 2025 Battery condition: New Kdjdpfswhtlijx Abbew Description: + Transmission with high torque for 12% incline + Combi Connect Telematic (for remote access) Sideshifter, fork positioner, Fork positioner: closed width 450mm, max. open width 1750mm (from outside to outside of forks) 3rd valve, 4th valve, rear working lights, front working lights, heater, full cab, CE certificate, safety light, Warning light color: Combilift green/grey USB power supply, seat belt, windshield wiper, additional hydraulic control valve with 2 hoses ending at the fork carriage