Milling machine

Hurco VMX 42i

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,200 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco MAX 5 mit WinMax Software, TECHNICAL DETAILS Travel range X-axis: 1,067 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of axes: 3 Rjdpezaprzefx Alrou Number of tools in the magazine: 30 Tool holder: SK40 Table size X-axis: 1,270 mm Table size Y-axis: 610 mm MACHINE DETAILS Control system: Hurco MAX 5 with WinMax software Drive power: 12 kW Torque: 237 Nm Operating hours: approx. 7,200 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: excellent (used), Year of construction: 2014, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Redpfozam E Eox Alreu Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Removable handwheel

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Additional equipment Redpfsy Tw R Hex Alrju • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. • Spindle hours: approx. 12,603 h • Total power requirement: approx. 28 kVA Redpfx Aloy Tw Ryerju Additional equipment • Chip conveyor • Internal coolant system Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2018, HURCO VMX42i Vertical Machining Center Year of manufacture 2018 Control system: HURCO WinMax5 Travel distances: X – 1,067 mm / Y – 610 mm / Z – 610 mm Only approx. 3,600 spindle hours (as of March 25, 2026) Equipment: WinMax5 control system with removable electronic handwheel 2x 19” LCD color monitors (text + graphics) Network interface 2 software units (1x plain text dialog programming on the machine 1x for ISO code programming via external programming device or CAD/CAM system) Pentium technology, SSD (Solid-State-Drive) storage medium, 2 GB RAM, Ethernet interface, USB interface, System-internal self-diagnosis, WINDOWS platform Adaptipath Trochoidal milling for higher material removal rate, controlled feed rate and detection of residual material Simulation graphics Tool and material library Pocket milling with islands Synchronous thread cutting (Thread cutting without a compensation chuck) ISNC extended NC mode RENISHAW measuring probe RENISHAW workpiece and tool measurement Spindle cooler Chip conveyor Chip guard cabin Coolant system Coolant spray gun Flushing system to assist chip removal LED machine light in the working area Signal light for machine operating status Set of machine feet Programming and maintenance instructions via the control system help function High-pressure cooling system for coolant supply through the spindle Coolant type: emulsion Coolant pressure: 20 bar Integrated hydraulic tool clamping system WinMax PC software NC programming system WinMax PC with 3D-plus and DXF interface Technological features: Simple programming through plain text full dialog Easy operation via PC keyboard Easy control by switching from Rodpfxey Uhnrj Alrou text display to graphics display Simple programming of the finished part contour On-line help in German Included in the scope of delivery: 2 hydraulic clamping vices approx. 50 tool holders, some with tools Operating manual Machine parameters on USB stick Technical data and control system – see PDF. All technical specifications, illustrations and content are non-binding and without warranty. Subject to change, errors and omissions. All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free on Truck) D-32457 Porta Westfalica exclusively packaging Delivery time: immediately Subject to prior sale / Payment immediately upon completion of purchase.

Condition: excellent (used), Year of construction: 2014, Hurco VMX42i vertical machining center Year: 2014 WinMax control Table clamping surface 1270 x 610 mm Table load 1750 kg Travels X-axis 1067 mm Y-axis 610 mm Redpfx Aljyuc Nvsrsu Z-axis 610 mm Tool holder SK 40 Spindle speed max 12000 rpm Spindle power max 18 KW Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter Accessories/options: - Through spindle coolant - Tool holders - Documentations - Remote control - Swarf conveyor Under power in our warehouse!

Condition: used, Year of construction: 2013, operating hours: 12,000 h, Hurco VMX42i WinMax control Table clamping surface 1270 x 610 mm Table load 1750 kg Travel X axis 1067 mm y-axis 610 mm z axis 610 mm Tool holder SK 40 Spindle speed max rpm 12000 Spindle power max 18 KW Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Rsdsri N A Hjpfx Alrou Coolant tank 484 liter

Condition: ready for operation (used), Year of construction: 2019, Make: HURCO Type of machine: VMX42i Year of manufacture: 2019 Control system: Hurco WinMax Tool holder: SK40 x-travel: 1.067 mm y-travel: 610 mm z-travel: 610 mm Speed range: 12.000 U/min max. Table load: 1.000 kg Table dimensions: 1.270 × 610 mm Rjdpfx Aleyc Sn Rjrou Number of tools in the magazine: 24

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,317 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco Max 5, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,067 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Spindle speed (max.): 12,000 rpm Spindle power: 18 kW Spindle torque: 239 Nm MACHINE DETAILS Control model: Hurco Max 5 Weight: 7,100 kg Rjdpfx Ajxrdxljlrju Operating Hours Spindle hours: 3,317 h Operating hours: 8,634 h EQUIPMENT 40-position automatic tool changer (ATC) Internal coolant supply 20 bar Renishaw probe OMP60 Renishaw laser Software package DXF Software package for tool measurement Software package for workpiece measurement Software package NC Conversational Merge Software package tool change optimization