Universal milling and boring machine

Huron

Year of construction: 1991, condition: ready for operation (used), controller manufacturer: HEIDENHAIN, controller model: TNC 415, This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machine's transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information. Fpsdpox D Humjfx Afnoc

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Fpedpfx Aowf Sfvofnjc

Condition: ready for operation (used), Year of construction: 2019, operating hours: 8,596 h, travel distance X-axis: 820 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3s Huron VX8 DNU was manufactured in 2019, featuring a table size of 1,000 x 530 mm and a load capacity of 500 kg. With an X-axis travel of 820 mm and a rapid traverse speed of 24,000 mm/min, it offers efficient machining capabilities. Consider the opportunity to buy this Huron VX8 DNU vertical machining centre. Contact us for further details. • Spindle hours: 2,586 • Table size: 1,000 x 530 mm • Rapid traverse speed: 24,000 mm/min • Spindle motor power: not specified • Tool magazine: 24-position random arm • CNC: Siemens 828D ShopMill • Air-conditioned electrical cabinet • Electronic handwheel • Ethernet connection • High-flow coolant system: 50 L/min • Preparation for through-spindle coolant • Wash-down gun • Air blow through nozzles • Condition: Excellent; very good appearance Fpsdpsyh Hh Tjfx Afnoc Additional equipment • Chip conveyor + chip bin • Isolation transformer • 28 tool holders and cutting tools • 2 complete sets of collets • Clamping elements set • Machine vice • Technical documentation and CD-ROM Technical Specification Taper Size ISO 40

Year of construction: 1985, condition: ready for operation (used), Table dimension: 1435x460mm, T-groove number/ width/ distance: 5/ 16/ 80mm, controls: TNCi-120, length: 1435mm, width: 2330mm, height: 1648mm, weight: 3,1t, with documentation, accessories are available, no defects known, an inspection is possible. Fpjdpfxolbmupo Afnsc

Condition: good (used), Year of construction: 1992, 1,0 St. gebr. Flachschleifmaschine Hersteller: ELB Typ: SUPER - RUBIN 024 CNC Baujahr: 1992 Verfahrwege: Schleiflänge: 600 mm Schleifbreite: 275 mm Schleifhöhe: 375 mm Tischaufspannfläche: 900 x 300 mm Tischbelastung: 300 kg Vertikal - Vorschub: max. 300 mm/min. Quervorschub: max. 2.000 mm/min. Fpsdpfx Afoi Ra Tyenjc Steuerung: UNICON Im Lieferumfang sind Schleifscheiben enthalten siehe Fotos.

Year of construction: 1991, condition: ready for operation (used), A Huron CNC bed milling machine is available. Travel X/Y/Z: 2400mm/1000mm/1000mm, control: Heidenhain TNC 415. An on-site inspection is possible. Fpsdpfxov Ubp Re Afnsc

Condition: used, Huron MU6 Milling Machine, serial number 14615, New Jan 1977, 40 INT Head, with tooling, table 2000mm x 460mm , note - no end covers. Fsdex Rky Aopfx Afnspc

Condition: used, Year of construction: 1982, grinding length:500 mm Fedpfecxxtmsx Afnjpc grinding width:225 mm workpiece height:400 mm total power requirement:5,5 kW weight of the machine ca.:3,4 t NC81 NC-control, table belt drive 100-25000 mm/min., automatic feed, electronic dressing unit 020 NC-K with RPM-compensation, coolant pump, emergency cut-off

Condition: excellent (used), Year of construction: 2017, Lathe Huron AX 300 MY Travel ranges: XYZC 250/ + - 40/625 mm Y: +/- 40 mm 12-position BMT 55 turret Spindle speed: 4000 rpm Fedpfx Afjwyp Azjnepc Power chuck: 250 mm Spindle bore: 65 mm Tailstock Chip conveyor Siemens 828 D control

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar LOVO Light Fpodpswtd Dyjfx Afnsc Coolant

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, A used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500, is for sale. Technical specifications: Fpsdpfxev Epige Afnoc Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as in the photos: 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + various adapters

Condition: refurbished (used), Table Size: 1635mm x 460 mm Fpedpfx Aswh N Uysfnsc X Long Axis: 1300 mm Y Cross Axis: 700 mm Z Vertical Axis: 500mm Spindle Taper: 40 ISO Spindle Speeds: 30-2066rpm Feed Range: 1.6 to 820mm/min Rapid Feed Rates X/Y/Z: 2800mm/min Max. distance between milling head and table 649 mm Machine Weight 3200 kg Machine Dimensions L x 2361mm D x 2500mm H x 1648mm Main Motor 8.7 kW Machine Light Universal Head Coolant Condition: Fully Refurbished (reground, hand scraped and re-aligned) New Screws & Nuts on X, Y and Z

Condition: ready for operation (used), Type RU 991 Longitudinal stroke 4500 mm Transverse stroke 1000 mm Vertical stroke 1000 mm Table dimension 6155x1000 mm Spindle speed 15 - 1500 rpm (RPM) Fedpfxevn Tc Aj Afnjpc Dimensions 6400 x 2400 x 2600 Weight 18T

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm Fpedpsu Uu S Tefx Afnsc spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Condition: ready for operation (used), Year of construction: 1981, feed length X-axis: 1,100 mm, feed length Y-axis: 700 mm, feed length Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, table width: 460 mm, table length: 1,635 mm, overall weight: 3,800 kg, visual 3-axis Fsdpfx Afeyf Af Senspc