KFA Unit IMA (2007)

IMA

Condition: used, machine/vehicle number: 008517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Cjdsy T Hpfopfx Aktjri Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit Csdpfjpp Tkfjx Aktjri FK rounding unit Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Condition: used, Year of construction: 1998, Used Machine Year of manufacture: 1998 Features and Technical Specifications: With a length of 5,500 mm, the Quadromat is the shortest edge-processing machine that, with its integrated workpiece return system, . Not only are the longitudinal edges milled inside the machine, but the end edges are also profiled, thereby completing the machining process. The finished workpiece is returned to the operator, eliminating the need for manual rework. With PLC control and up to 20 machining programs Workpiece dimensions: - Minimum width: 60–80 mm (depending on the edge banding material) - Minimum length: 150 mm - Workpiece thickness: 10–50 mm - Edge banding thickness: 0.4–12 mm - Minimum edge banding length: 400 mm Feed rate: 18 m/min with 2 jointing milling motors with multifunction milling unit (flush, chamfer, radius) Csdpfx Aezk Nr Ujktori with scraper blade with crosscut saw with 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection: 7–10 bar Vacuum connection: 160 mm Weight: approx. 2,400 kg Availability: available shortly Location: Röllbach

Condition: good (used), Year of construction: 2010, functionality: fully functional, Single-sided edge banding machine with full equipment. Material dimensions: Roll material: - Paper and plastic edge bands 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm - Edge strips 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine equipment: Cjdpfx Aks Ahytwsteri Infeed guide, adjustment automatically via program Release agent application Joint milling unit with 2 motors, 4 KW each Air nozzle for removing loose particles Gluing unit with glue application of 1.8 L, with QUICK-LOCK with single-roller / strip magazine 1 main pressure roller and 3 follow-up pressure rollers Pressure zone adjustment automatically via program Trimming unit with 2 motors, 660 W each, swiveling from 0 to 8 degrees Copy milling unit with 2 motors, 180 W each, and 2 motors, 400 W each max. workpiece thickness 60 mm max. working speed 20 m/min. Automatic adjustment via program Profile trimming unit Glue joint trimming unit Cleaning agent application Smoothing unit with 2 motors, 180 W each Control system ICOS open TS, PC-based

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min Codpezuyqvofx Aktsri - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: used, Year of construction: 2023, Manufacturer: Ilapak Italia S.p.A. (IMA Group) Year: 2023 Type: Complete bagging line LINE-UP 1. Belt conveyor – Service PTNMSX 2. Z-type lift with cleats – Service PTNMSX-Z 3. 14-head combination weigher – Ilapak Weightronic WA 14/50 4. Vertical form-fill-seal (VFFS) bagging machine – Ilapak Vegatronic VT2000 OF P 5. Stainless steel platform (gantry) – FQS Maximum line dimensions: 4.81 x 3.00 x 7.35 m (H) (technical data sheet) Cjdpfxj Ahkz He Aktsri Designed for use in cold/damp environments (deep-frozen products) 1. VEGATRONIC VT2000 OF P VERTICAL BAGGING MACHINE Vertical form-fill-seal (VFFS) bagging machine, Open Frame version Forming tube and neck Vertical longitudinal seal Horizontal cross-seal jaws with integrated cutting blade Film drive via belts Bag length controlled by encoder Maximum mechanical output: 70 bags/min Film reel: Max. Ø: 600 mm Width: 400 mm Core: Ø 76 mm Max. weight: 50 kg Current format: Ø 170 mm (can be changed on request) HMI touch-screen control 2. WEIGHTRONIC WA 14/50 MULTIHEAD WEIGHING MACHINE 14 heads – 1 pre-dosing basket + 1 weighing basket per head 15 load cells: 14 weighing baskets + 1 beneath the central cone Central distribution cone Electromagnetic radial vibrating channels, which can be dismantled without tools Ouverture des paniers par moteurs pas à pas – cames paramétrables Timing hopper Unloading via 4 removable chutes into the outlet hopper Maximum speed: 90 strokes per minute Bucket capacity: 5.0 l Volume maximal de vidange (par déversement) : 12,5 l Plage de poids de vidange (par déversement) : 100 g - 3 000 g Maximum length of parts: 150 mm Modes: weighing or piece counting, mixing of up to 4 batches, multiple discharge per bag Automatic tare and calibration Ilapak HMI touchscreen Control of up to 4 external feeders Contact parts that can be removed without tools and are numbered per head AXIS F1035-E surveillance camera above the weighing machine – real-time display on the HMI (augmented reality mode) 3. PRODUCT POWER SUPPLY ( SERVICE) PTNMSX belt conveyor: - AISI 304 stainless steel frame - Modular PP belt - Effective width: 533 mm - Effective length: 2405 mm - Loading/unloading height: 3080 mm - Speed: 22 m/min - SEW SA37 gear motor – 0.37 kW – IP65 - Power supply: 400 V three-phase – 50 Hz - Wash ramp with 10 nozzles PTNMSX-Z Z-lift: - AISI 304 stainless steel structure - Modular PP belt with cleats – pitch 203.2 mm - Effective width: 403 mm - Effective length: 5,300 mm - Loading height: 2,660 mm - Unloading height: 5,215 mm - Speed: 24 m/min - SEW SA47 gear motor – 0.75 kW - Power supply: 400 V three-phase – 50 Hz - Stainless steel loading hopper - Inspection hatches Conveyor control via the bagging machine control cabinet 4. FQS GANTRY PLATFORM Stainless steel tubular structure designed for washing Weighing machine support above the bagging machine Staircase with stringers and steps made of folded sheet metal Stainless steel handrails Bolted assembly (dismantlable) DOCUMENTATION AVAILABLE EC Declarations (production lines and machinery) Declarations of incorporation for conveyors User manuals (FR / IT) Risk assessments (FR) Electrical and pneumatic diagrams Illustrated parts lists (IPB) Recommended spare parts lists (RSPL) Food contact certificates Equipment dismantled and stored on Osertech's premises.

Condition: used, Year of construction: 1994, Storage location: Nattheim Credpfx Aowmm Nrektsi

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Csdezuyqiepfx Aktsri Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 2023, functionality: fully functional, total height: 1,986 mm, total length: 2,025 mm, total width: 1,349 mm, IMA TABLET PRESS, MODEL PREXIMA 300 Single-sided tablet press for medium production. Flexible and efficient, its design allows for accessibility, with quick turret removal and easy cleaning. Optimal performance even with the most difficult-to-manage powders. Built in 2023. CHARACTERISTICS - Speed: 90 to 120 rpm (depending on die and tools) - Noise level: below 75 dB - For medium production output Cjdpfx Ao Ah Edvoktjri - Die type: IMA 32; D; B; BB; BBS - Tool type: IMA 32; D; B - Dimensions: 2025 x 1986 x 1349 mm PRODUCTION - Max. tablet output: 1,620 to 5,280 tablet/h (depending on die and tools) - Max. tablet diameter: 11 to 39 mm (depending on die and tools) - Max. tablet thickness: 1.5-10 to 1.5-12 mm (depending on die and tools) - Max. precompression: 100 kN - Max. compaction: 100 kN ENERGY CONSUMPTION - Max. installed power: 13.5 kN - Standard voltage: 400 v (+/- 10%); 50-60 Hz

Condition: excellent (used), IMA BIMA QUADROFORM C80/280.01 – Industrial CNC Machining Center For sale: an industrial CNC machining center manufactured by the German company IMA Maschinenfabrik Klessmann GmbH, model BIMA QUADROFORM C80/280.01. Identification data: Manufacturer: IMA Maschinenfabrik Klessmann GmbH Model: BIMA QUADROFORM C80/280.01 Year of manufacture: 1996 Serial number: 20550 Type: industrial CNC machining center Purpose and capabilities: The center is designed for the industrial machining of furniture components and wood-based materials. Typical operations performed on this type of machine: milling, drilling, grooving, contour machining, sizing of components. Equipment visible in the photos: structure and working unit of the CNC center, worktable with material clamping elements, machining units and working heads, control cabinet, Codpe Ahlzajfx Akteri operator panel. Technical condition: The machine is in good working order. The equipment can be inspected on site. The sale includes the machine with the equipment visible in the photos.

Condition: used, Year of construction: 2005, CNC Machining Center Manufacturer: IMA Type: BIMA 300 Year of manufacture: 2005 Technical data Work area - Machining area X-axis: 4,300 mm - Machining area Y-axis with main spindle and 20 mm tool: 1,400 mm - Machining area Y-axis with drilling unit (all vertical drilling spindles): 1,100 mm - Max. clamping height above the vacuum suction surface: 125 mm - Max. workpiece thickness: depends on equipment and application - Working height: approx. 950 mm - Two-zone work area without pendulum machining: 2 x 2,050 mm Cjdpfe Adyhwex Aktjri - Average clearance without pendulum machining: 200 mm - Two-zone work area with pendulum machining: 2 x 1,750 mm - Average clearance with pendulum machining: 800 mm Main spindle - Spindle power: 7.5 kW - Tool holder: HSK-F63 - Taper diameter: 38 mm - Automatic tool clamping - Clamping force: 11,000 N - Release force: 20,400 N - Max. tool weight: 6 kg - Spindle speed: continuously variable, 1,500 - 18,000 rpm - Direction of rotation: programmable, clockwise and counterclockwise - Drive: Three-phase motor with frequency converter - Spindle lubrication: permanently lubricated at the factory - Spindle cooling: air-cooled - Integrated CNC rotary axis for tool positioning over 360°, with torque support and pneumatic connection Axis speeds - Max. rapid traverse X-/Y-axes: 60 m/min - Max. rapid traverse Z-axis: 30 m/min Vacuum, extraction, and compressed air - Required compressed air pressure: 7 bar - Extraction port diameter: 250 mm - Required extraction air velocity: 28 m/s - Required extraction volume flow: 4,950 m³/h - Vacuum pump capacity: 90 m³/h Dimensions and weight - Machine length: approx. 5,750 mm - Machine width: approx. 3,830 mm - Machine weight: approx. 6,000 kg Accessories - 90-degree angle drilling unit - 3 x HSK tool holders Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Manufacturer: IMA Kilian Model : E150 plus Version : 26-EU-B Year: 2003 Number of stations: 26 Die type: B Punch type: EU-B / IPT-B Punch configuration : Codpfox R A Ulex Aktjri die diameter: 30.16 mm height of dies: 22.22 mm max tablet diameter: 16 mm max filling: 15 mm max main compression: 80 kN max precompression: 23 kN Production rate: 7,800 – 160,000 tablets / h Technical documentation available Weight: 1500kg  

Condition: used, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Csdszg I Uyepfx Aktori Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Available history and documentation   These elements can be quoted separately. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.