Cnc lathe

Index ABC 42

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Hfodpfx Asw Tg Adebrsc Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar Hfedpoww Nazefx Abrec - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: used, Year of construction: 2004, MAZAK QUICK TURN NEXUS 200-M CNC LATHE Mazak Quick Turn Nexus 200 M CNC lathe with Mazatrol Nexus 640T control, a new 8” power chuck with big bore to take 80mm, tool setter, parts catcher, swarf conveyor, suit of tool holders, collet chuck and barfeed interface * Note: Photographed on arrival…awaits cleaning & prep. Specification: Maximum Swing 675 mm / 26.57 in Maximum Machining Diameter 380 mm / 14.960 in Maximum Bar Work Capacity 65 mm / 2.6 in Maximum Machining Length 541 mm / 21.300 in Hjdpfewx Nl Hjx Abrsfc Main Spindle Chuck Size 8 in -with big bore Maximum Speed 5000 rpm Motor Output (30-minute rating) 19 kw / 25.0 hp Turret (Upper) Number of Tools 12 Maximum Speed 4500 rpm Motor Output (5-minute rating) 6 kw / 7.5 hp Feed Axes Travel (X Axis) 230 mm / 9.06 in Travel (Z Axis) 575 mm / 22.64 in

Condition: good (used), Year of construction: 2004, operating hours: 77,711 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, rapid traverse Z-axis: 45,000 m/min, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 77,711 h | Spindle ON: 16,294 h - Spindle HSK-A63, 10,000 rpm - 32 tool positions - Rotary table SRT 280 mm with integrated clamping system SK50 (can be closed off if not needed or converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool positions plus 87 additional positions (ZM87) - Thermal compensation - BLUM tool measurement (probe on machine column) - Renishaw measuring probe - Chip container - Status beacon The machine has been thoroughly inspected; a geometry protocol and circularity test measurements are available. The machine can be viewed and tested under power at any time. Very well-maintained condition. Hedpfxexcp R Is Abrofc

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Hjdpfxow Rrvwo Abrofc Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE Hfodpfx Absuq Iwpsroc MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm ram adjustment:63 mm Hedpfjcxxx Hox Abrsfc no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 Hedpfx Abewbi A Derefc - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, nominal power (apparent): 10 kVA, overall weight: 6,500 kg, spindle speed (max.): 20,000 rpm, Heidenhain TNC530, 4th axis rotary table Hsdpfxjw Dc Iro Abrefc spindle 20,000 rpm, HSK 63 table 850x530 mm travels 600x450x450 mm 30-tool changer weight 6,500 kg

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min Hfsdpfxswx R Rko Abroc spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 12 tool shaft (cylinder shaft DIN 69880) VDI 25 speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant