Vertical machining center

JOHNFORD VMC-1300

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Gkjdpfxoxln Iwe Af Aea Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm range of turning diam 460-1250mm Gkodpfxek Dz N Io Af Aoa

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: Gsdpfx Aexyllvsf Aeka • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN 530, workpiece length (max.): 1,250 mm, workpiece width (max.): 850 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,200 kg, table width: 850 mm, table height: 640 mm, table length: 1,250 mm, spindle speed (max.): 18,000 rpm, distance table to spindle center: 700 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, DECKEL MAHO DMC 100V Machine after complete rebuild. Spindle overhauled and bearings replaced. Tool measurement laser: BLUM Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: DECKEL MAHO Model: DMC 100V LINEAR Control: HEIDENHAIN 530 Year of manufacture: 2003 Gkedpfsx Elxijx Af Aja Table size: 1250x800 mm Travel: X 1000, Y 800, Z 500 mm Workpiece weight: max. 1200 kg Major machine overhaul: 06.2025 Spindle: HSK 63A 18000 rpm Power S1/S2: 15kW/19kW Torque S6 40%ED: 130Nm Tool changer: 60 positions Workpiece probe: HEIDENHAIN Tool probe: BLUM laser Chip conveyor Internal coolant supply (IKZ) Machine in very good condition, after complete overhaul. Regularly serviced. Machine is in continuous operation.

Condition: used, Swing Diameter Over Bed: 400 mm Gsdpfx Asxg Nd Ajf Ajka Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Godpfxoxdxhre Af Aoka

Condition: used, Year of construction: 2014, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Weight: 3.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 441 - Power [kW]: 3.0 - Press force [ton]: 28 - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) Gkjdpfx Afexapfto Aoa - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] MACHINE HOURS - Number of working hours : 80490 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5,S6 - Rotating guide bush - Parts catcher - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump - Bar loader : ROBOBAR SBF 532 - Oil mist extractor Gedpfeuha Ugjx Af Aska - Cooling unit

Condition: like new (used), Year of construction: 2013, measuring range X-axis: 1,600 mm, measuring range Y-axis: 4,200 mm, measuring range Z-axis: 1,500 mm, workpiece weight (max.): 5,000 kg, Equipment: type plate available, CARL ZEISS CNC coordinate measuring machine ACCURA II MASS 16/42/15 Year of manufacture: 2013, Overhauled: 2025 Measuring range: X = 1600 mm, Y = 4200 mm, Z = 1500 mm Control system: C99 SR VII Control panel: BP26_SE Sensor: VAST XT GOLD and RDS-CAA with VAST XXT Probe changing magazine: Multi Sensor Rack MSR Automatic temperature compensation Accuracy: VAST XT GOLD / RDS-CAA XXT MPE-E 3.6+L/300 4.9+L/200 R0 2.4 5.5 MPE-P 3.6 4.9 MPE-THP 3.7/68sec 4.7/68sec RONt 3.5 5.5 HP Z4 WIN11 workstation with 27" monitor Calypso Basic, current version Any further option possible Accessories: Calibration sphere Exchangeable probe tips XT and XXT Exchangeable magazine slots Probe accessories Gedsydnzcopfx Af Aeka Documentation Further accessories

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Godpfx Astx Dn Usf Aska