Pelleting press 39-1000

KAHL 39-100

Condition: excellent (used), functionality: fully functional, height adjustment type: electric, power: 90 kW (122.37 HP), input voltage: 380 V, Ready for work. Maximum capacity from the manufacturer 1.5T/H Duedpfxew Ulq Aj Afnen

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Duodpfx Aferah Evenjn Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Condition: good (used), Year of construction: 2014, Pellet Press Dsdpfx Afovdrtxjnjun Manufacturer - TEKNO UNO Model - TK 304 Year - 2014 Motor Power - 50 kw Capacity - 450 kg/h

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Fully refurbished pellet press from Italian manufacturer ZEPI. The main engine power is 315kW, which allows the production of up to 6t/h of wood pellets. The delivery set also includes a ZEPI ZC500 paddle mixer and a ZEPI ZFS250 feed unit. Djdpfevpvp Iex Afnjun

Condition: good (used), Year of construction: 2008, La Meccanica CLM 800 POR Granulator The machine has no door It worked on a cake Dujdpewdawqefx Afnon

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials Dsdjxv Dkcspfx Afnoun - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 3294, type of input current: three-phase, power: 90 kW (122.37 HP), input voltage: 400 V, We are selling line from Nova pellet, 2019 production and 2020 first year of production start. -Pellet press N-MIDI 90 KW 12.500 hrs(very good and daily maintaince, 2025 new rollers and die, 200 hrs old Main tooth-belt)-2019 year -Transporting vertical elevator ca 10m height-2019 year -Cooling tower N-CO700-2019 year -Control cabinet-NEW UNUSED -Heavy duty hammermill Miller M16(37kW electric engine)-NEW UNUSED We are selling only items above(without cyklon, filters etc.)! Duedpfxewahhco Afnen Line is in very good condition and had very good daily maintaince. For further informations, please write or call on our contact.

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Dedjvfxqyspfx Afnsun Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: used, Year of construction: 2007, functionality: fully functional, Wood Pellet Production Plant 10 t/h On behalf of AEK Pellets AG, Switzerland, we are selling a currently operational, fully functional production plant for the manufacture of wood pellets with a throughput of 10 t/h, expandable up to a maximum of 12 t/h. Overview - 3-press system including machines by CPM, Salmatec, Knoblinger, Friedli - Scope of supply: from dry wood shavings silo (incl. discharge screws) to pellet screen - Including control system and wiring Condition - Years of construction: 2003 / 2006 / 2007 - Plant in ongoing operation; inspections possible by prior arrangement - Annual maintenance by manufacturer - Various essential spare parts available - Manufacturer’s drawings available Main Components (excerpt) - Silo discharge screws (IPM, Gottwald) - Conveyor technology incl. belt bucket elevators, chain and connecting conveyors - Intermediate bunker for dry shavings (48 m³) - 2 pcs. starch silos with micro dosing (26 m³) - Dry chip mill Champion CHAMP 30X54, 250 kW, with magnetic separator, foreign body extractor, and Scheuch filter - Salmatec 1900LS conditioner with moisture measurement and steam/water regulation - Maturation silos and dosing systems - Pellet presses 2× Salmatec Maxima 840 and 1× CPM 7930-4 - Belt cooler, AVITEC pellet screen (3 fractions) with pellet cracker - Central dust extraction with cyclone, bag filter (181 m²), and fan (45 kW) - Associated steel structures and access platforms Availability - Dismantling available from July 20, 2026, with later dates upon request - Commercial Terms - Sale ex site, as is, with all warranties and guarantees excluded - Buyer must ensure CE compliance of the entire plant at the new location - Dismantling and transport to be carried out by the buyer; risk and liability transfer upon start of dismantling - Lifting equipment and export documents provided by the seller - Registration of personnel and proof of insurance to be arranged by the buyer - Components not explicitly mentioned as well as external media (power, steam, water, compressed air) not included Dujdpfxoydr Akj Afnon - Pellets have so far been produced according to ENplus A1; no guaranteed property - Liability for consequential damages excluded; technical details without guarantee Contact Commercial / Inspection: Marcel Moser, AEK Pellets AG Technical: Dieter Friedli, Friedli AG Engineering und Anlagenbau Friedli AG Engineering und Anlagenbau has over 25 years of industry experience and has been operating its own wood pellet production plant for more than 10 years. We are pleased to support you with consultancy, feasibility studies, and technical and commercial evaluations.

Condition: used, functionality: fully functional, For sale: used Amandus Kahl 45-1250 250KW granulator, Dusdpfexq Tm Asx Afnon