Pellet press

Kahl C39 1000

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head +180/-7° stepless HSK A63 Number of pallets: 2 pcs Kjdpfxew Ngipo Amzjlr Pallet size: 1000*800 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Control: SIEMENS Spindle bore: 65 mm Turning length: 660 mm Max. speed: 6,000 rpm Counter spindle Z= 700 mm TOOL CARRIER 1 with milling spindle Milling spindle: 7,200 rpm B-axis: 360° 14 stations with driven tools Tool speed: 7,200 rpm Travel: X= 230 / Y= ±65 / Z= 845 Klodpfjyi Uk Ijx Amzsr TOOL CARRIER 2 14 stations with driven tools Tool speed: 7,200 rpm Travel: X= 140 / Y= ±45 / Z= 810 Chip conveyor Filter Bar feeder INDEX MBL

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Kedpewp Rqfjfx Amzslr Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Kledpfx Amju Hmacszsr Machine workshop checked Machine cleaned and repainted

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT Kledpfjdfgg Iox Amzsr with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: good (used), Manufacturer: Haver & Boecker Documentation available Mechanical conversion from 50 kg to 25 kg bags in 1999 Control system: Siemens S7 Ksdpev Sz Tdjfx Amzolr Upgraded to the latest standard with spare parts support in 2015 Supported bag types: Quicklime, hydrated lime, cement, gypsum

Condition: excellent (used), CPM 2000 granulator, 90kW engine die diameter 410mm We have several pieces Kedpswcdpnefx Amzolr

Year of construction: 1999, condition: used, System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Hoechstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Klsdpfx Ascbukromzer Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2105261-01, Offer 25388 Technical Data: - Load capacity 1000 kg - Electric chain hoist VETTER - 2 lifting speeds 4 + 1 m/min - Jib outreach approx. 2000 mm - Jib arm IPE 220 Kljdpfx Amsxt Iq Iozer - Hook height approx. 2700 mm - Slewing radius 360° - Total height approx. 3300 mm - Baseplate of column / pedestal approx. 1400 x 1400 mm - Total length approx. 2900 mm - Total weight approx. 4400 kg - Connection 400 V / 32 A

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control Klodpfx Ajw Hg Nljmzjr TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.