Hydraulic metal circular sawing machine

KALTENBACH KKS 400 E

Condition: good (used), Year of construction: 2005, - Description: see data sheets - CE Credpfsy H I A Hex Anweb

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Crjdpfoxnlgcsx Anweb Storage location: Garbsen

Condition: ready for operation (used), Year of construction: 2007, total width: 1,070 mm, total height: 1,780 mm, overall weight: 820 kg, product length (max.): 800 mm, Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details. • Saw blade diameter: 400 mm • Saw blade types: HSS solid steel, HSS segmental • Saw blade mounting: DIN 8576 • Centering bore: 50 mm • Number of carrier bolts: 4 pcs • Bolt circle diameter: 80 mm • Diameter of carrier bolts: 13 mm • Feed speed rate: 0–1000 mm/min (infinitely variable) • Quick return: 1550 mm/min • Rotary table adjustment: Manual, +/- 90° • Cutting speed (with 400 mm blade): 10/20, 13/26, or 15/30 m/min • Electric power equipment: 1.7 / 2.6 kW • Operating voltage: 3x 400V / 50Hz • Control voltage: 24V DC • Total current: 9 A Csdpfx Aoy D Srmjnwerb • Main fuse: 16 A Additional equipment • Length stop T3/L 41 NC, 6 meters (Year 2013)

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm Crsdpfx Ansy D I Nneweb SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Csdpfx Ansrfw Ikjwerb Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Year of construction: 2015, condition: ready for operation (used), Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible. Cjdpfx Aey Ax Urjnwsrb

Condition: good (used), Year of construction: 1987, Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangular: 305 x 40 mm Mitre cut at 45° round: 130 mm Rectangular: 245 x 40 mm 2 cutting speeds via pole-switchable motor: 9 and 18 m/min Feed rate hydraulically steplessly adjustable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Crjdpfx Anjx Ir Rwewsb Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Cjdpfx Aewu Ez Nonwerb

Condition: good (used), Year of construction: 2000, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm Cjdpfxex Sdpye Anwjrb -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 400 mm, Semi-automatic Mitre Circular Saw KKS 400 E Completely overhauled to as-new condition – available from stock WORKING RANGE Round material: 130 mm Square material: 120 mm 2 cutting speeds Your advantage: - Machine directly overhauled by the manufacturer including 6-month parts warranty - All machines are completely dismantled and overhauled Crodpfx Ajyq Sdzenweb - Only original KALTENBACH spare parts are used

Condition: good (used), Year of construction: 2011, From a company liquidation: Berg und Schmid VKS 370 HA Year of manufacture 2011 Semi-automatic machine 4-meter roller conveyor left + right Left stop with digital length measuring system, adjustable via handwheel Cutting capacity with a 370mm saw blade: Round 120mm - Square 100mm - Rectangle 180x100mm at 90° at 60°: Round 110mm - Square 90mm - Rectangle 90x100mm Miter cuts left up to 60° - right up to 45° Saw blade mount 40mm Saw blade speed 15-70 rpm 380 volts Coolant pump Crodpfewa Ecqex Anweb Semi-automatic function: 1. Clamp the material 2. Saw starts 3. Lower at rapid traverse to the beginning of the material or cut immediately for serial cutting 4. Remove the saw blade 5. Raise the frame until just above the material 6. Open the clamping jaw

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Cjdpfx Aswp Ipxonwjrb

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1500 01025, saw blade diameter: 400 mm, total height: 1,700 mm, total width: 1,100 mm, overall weight: 700 kg, type of input current: three-phase, cutting diameter: 130 mm, space requirement height: 2,000 mm, space requirement length: 900 mm, space requirement width: 1,200 mm, length stop: 6,000 mm, Kaltenbach KKS400E cold circular saw, year of manufacture approx. 1980–1982, fully functional, can be inspected under power. Incl. outfeed roller conveyor with 6000 mm length measuring device. Cutting range at 90°: D130 or 120x120 mm, flat material 315x40 mm. Crodpowx Nn Isfx Anwjb

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 Codpjfym Ewsfx Anworb with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Stepless. Machine little used in good condition.

Condition: refurbished (used), Year of construction: 1991, For sale is a Kaltenbach cold circular saw. The machine has been completely disassembled and rebuilt. As part of the overhaul, the gearbox, motor, and hydraulics were reconditioned. The table has been planed and fitted with new bearings. Gearbox backlash-free! Type: KKS 400 E Year: 1991 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 – 1,000 mm/min Rapid advance/return: 1,550 mm/min Max. working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Min. working area: 10 x 10 mm Cedjxq S Ilspfx Anwerb Mitre range: 0° – 90° – 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Böhmenkirch Shipping available on request Forklift available for loading.