Hydraulic bow saw, metal saw, reciprocating saw, hydraulic bow saw

KASTO WBS 210 / 230

Condition: used, Year of construction: 1987, Hydr. hacksaw, metal saw, lifting saw KASTO Unfortunately there is no type plate available, the data is from a comparable saw Njdpfxeq R Riis Ab Uowd Type PSB WBS 210 / 230 Year of manufacture in the 80s Sawing area - round Ø 250 mm Sawing area - square 225 x 225 mm Sawing area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole-changing Mains connection 380 Volt, 50 Hz - only for 90° cuts, no mitre adjustment - Saw motor with 2 speeds and 3 V-belt speeds - Hydraulic saw arm feed - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for lowering saw bow - manually height-adjustable material support table with mm scale via handwheel - Manual material clamping - Coolant device in the machine base Space requirement L x W x H 1500 x 700 x 1550 mm Weight approx. 590 kg

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe Njdpfxexmakts Ab Ujwd - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm Njdpfx Ajtzf N Rob Uewd -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Nwedjtia Hhjpfx Ab Usd

Condition: good (used), functionality: fully functional, Year of construction: 1998, working width: 2,000 mm, pressing force: 35 t, pressure 35to Nedpswagykofx Ab Ujwd max. bending length 2000mm arrester behind drive capacity 4,5 kW weight 3000kg

Condition: used, turning length 800 mm turning diameter 280 mm Nwjdpexacg Rofx Ab Usd turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Condition: used, Year of construction: 2008, Material feed in any length (max. stroke 610 mm) Nedpfxsvxqtae Ab Uowd Cutting diameter: round 510 mm, flat 500 x 500 mm Cutting speed adjustable via control: 25 - 235 m/min chip conveyor Operating instructions, circuit diagrams and spare parts lists available Just under 5,000 sawing hours Further technical data see photo or on request Machine weight: approx. 3 t

Year of construction: 2002, condition: ready for operation (used), Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes. Nwedpfxex Aupis Ab Ujd

Condition: like new (used), functionality: limited functionality, The K440 is one of the high-performance band saws. Thanks to the optimal band speed, the vertical saw is ideal for cutting large quantities of fresh and frozen cuts. Suitable for sawing frozen fish and meat blocks. Nedpfex S I Rbsx Ab Ujwd The stationary K440 saw with roller sliding table is suitable for universal use in processing plants, supermarkets, and in the meat and fish industry. Useful dimensions: Pulley diameter: 430 mm Band saw blade: 3370×16 mm Cutting height: max 415 mm Cutting side clearance: max 410 mm

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: Nwodpfxju Ndcmj Ab Ujd - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *