Polishing machine

Knuth-Rotor 2

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Dodpfx Aspugwisffjkk The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 Djdpfx Aoqvd Iusffokk

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800x1,500x2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Speed of the working disc 45/70/90/140 rpm Main drive performance 4.0 kW Dkodpfxsh Invrs Affok Connection 400V/50Hz Emergency stop switch Conventional control with control panel Full-fledged lapping machine, conventional control

Condition: used, TECHNICAL DETAILS - Grinding length : 120 [mm] - center height : 102 [mm] - Max. part length : 230 [mm] - X/Z stroke : 450 / 200 [mm] - Rapid traverses rates (X/Z) : 12000 [mm/min] SPINDLE SUPPORT - Number of spindles : 1 - Spindle speeds : 42.000 [rpm] - Power : 3 [kW] PART-HOLDER HEADSTOCK - Speed : 1500 [rpm] - Power : 1.4 [kW] - Spindle passage : 28.6 [mm] - Type of cone : A2.4/CM5 - B axis adjustment angle (manual) : +/- 2 [°] - C axis indexing precision : 0.0001 [°] Dkedpjxylwfjfx Affjk POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 34 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3600 x 2800 [mm] - Machine weight : 2600 [kg] MACHINE HOURS - Number of hours under power : 1022 [h] EQUIPMENT - CNC : Fanuc 0i-TFP - Software StuderSIM - Coolant tank - Coolant through spindle - Oil mist extractor - Diamond grinding device - Workpiece probe

Condition: used, TECHNICAL DETAILS - Plate - External diameter : 750 [mm] - Internal diameter : 150 - Main motor rotation speed : 4 [kW] - Supply voltage : 380 [V] - Total installed power : 3.6 [kW] WEIGHT & DIMENSIONS Djdexb Em Nspfx Affokk - Machine floor space : 1100 x 1700 [mm] - Machine height : 2000 [mm] - Machine weight : 1100 [kg] - Number of hours : 5160 [h]

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 04306, measuring range X-axis: 1,000 mm, measuring range Y-axis: 650 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 700 kg, total height: 2,734 mm, total width: 1,160 mm, total length: 1,680 mm, overall weight: 950 kg, input voltage: 230 V, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, Equipment: type plate available, !!!DISCOUNT!!! Motor-driven coordinate measuring machine with robust bridge design, mounted on air bearings. Included with the machine are a Renishaw 5-axis touch-trigger probing system PH20, compact touch probe TP20 with 1x SF module, Renishaw KIT 23 (stylus kit), TCR20 module changer (compatible with PH20 probe), UCCT5 interface kit for operation (joystick, cabling, servo end amplifier), UNITABLE control console, calibration sphere with holder (ceramic, diameter 25), PC table (120x80x72 cm), and Dell Optiplex 7010 (W10) with monitor and A4 inkjet printer. Dkodpfowu Uccjx Affjk

Condition: used, Year of construction: 2008, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm Control FANUC 320iA 3 x internal grinding spindles 2x HV-X 100-90000/3 Housing diameter: 100 h5 mm Spindle speed max: 90000 min/1 Nominal/max. power: 2.5/3.0 kW Spindle nose: D10/18 Spindle cooling: Water 1x HS80c 120000/1.1 Housing diameter: 80 h5 mm Spindle speed max: 120000 min/1 Nominal/max. power: 0.8/1.1 kW Spindle nose D06/12 Spindle cooling: Water 1 x external grinding spindle: MMO-100 HSK-C50/4 Diameter: 100 h5 mm Maximum speed: 3770 min/1 Nominal/max. power: PS1/PS6 - 6.0/7.0 kW Clamping system: HSK-50/M12 Grinding wheels: Diameter 125-200 x 2-20 mm 1 x dressing spindle MHF-72 D40/16 Housing diameter: 72 h6 mm Maximum speed range: 16000 rpm Power S1/S6: 400/500 W Spindle nose: 40 mm/8xM5 on TK 56 mm Spindle nose: 40 mm/4xM5 on TK 32 mm 1 x measuring probe (longitudinal positioning) Etamic C25 Abrichteinheit für das automatische Abrichten mit Hydraulisch einschwenkbarem Arm. Präzisions Positionierung und Einrastung mittels Konischem Bolzen, geschliffen und gehärtet. Schwenkbewegung : Hydraulisch Schwenkgeschwindigkeit : Einstellbar 1 x Messtaster (Längspositionierung) Etamic C25 X-Achse Fahrweg: 400 mm Auflösung: 0.0001 mm Vorschub: 0-10'000 mm/min Messung: Glasmassstab Absolut Z-Achse Fahrweg: 400 mm Auflösung: 0.0001 mm Vorschub: 0-10'000 mm/min Messung: Glasmassstab Absolut B-Achse Fahrweg: +60°..- 91° Auflösung Winkelmessgeber: 0.0005° Auflösung Antrieb: 0.0001° Vorschub: 25°/Sek Messung: Winkelmessgeber Absolut Revolver Anzahl Position 4 Zeit beim Wechseln 5 Sek Möglicher Spindeldurchmesser: 0 100 mm Werkstück- Spindeldrehzahl max.: 1'000 min-1 Spindelstock Leistung max.: 1.8 kW 960-41 Spindelnase: A2.4/MK5 Ausrüstung Anschnitterkennung Anschnitterkennung und Prozessoptimierung zur Optimierung des Schleif- und Abrichtprozesses und zur Verkürzung des Luftschleifens. Signal über Körperschallsensor auf dem Werkstückspindelstock aufgebaut, bestehend aus: -1x AE-Auswertsystem mit Display AE4100 -1x Kabel -1x Software und Anbauaufwand inkl. Material Sensor und Empfänger für Abrichtspindel - 1x Ringsensor - 1x Ringempfänger Sensor und Empfänger für Spindelnase A2.4/MK5 Djdpfox Dxw Hjx Affekk Elektroschrank mit CNC-Steuerung FANUC 320i A und Bedienungskonsole mit Bildschirm 15" Color LCD TFT 1024 x 768 Bedienpanel 55 Tasten und LEDs PC Tastatur QWERTY Intel Pentium III 866 MHz Windows XP Professionnal Combitec HMI für FANUC 320i A Standard Programmiersprache nach DIN/ISO Werkstattorientierte Schleifzyklen (WOP) Mobiles Handrad mit Wahlschalter 0.001, 0.01, 0.1 mm und Achsenwahlschalter Vorschub Korrektur über Raster-Potentiometer 0-100 % Spindelgeschwindigkeits-Korrektur über Raster-Potentiometer 50-125 % RJ-45 Ethernet mit TCP/IP Software und Zubehör für das Radius und Konus schleifen mit PC Simulation und CNC-Bahnkontur schleifen Vollautomatisches Schleifen eines Radius G71 und/oder eines Konus G72 ab einem bestimmten Winkel auf einen...

Year of construction: 1996, condition: good (used), Control UCC lite-2 Measuring range 700 x 450 x 350 mm Measuring heads (MH20i, PH1, PH6) Dedod Stn Topfx Affokk Various touch probes

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 018.0179.90.035, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Dkodpfsyh R Uwjx Affok Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] - Remaining work thickness : approx. 5 [mm] EQUIPMENT Dedpfxjug U Dmj Affekk - Same as on photos