SHREDDER

Komptech Terminator 3400 SE

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, power: 367.75 kW (500.00 HP), filling opening width: 700 mm, filling opening length: 1,200 mm, rotational speed (max.): 1,050 rpm, rotational speed (min.): 950 rpm, - Engine: Deutz 500 HP - Fill opening dimensions: 1200x700 mm Guodpfey I Uwaox Al Ujh - Rotor: 4 shafts and 40 stars - 950-1050 rpm - Throughput: 4-6 t/h - incl. new spare rotor & stars - completely overhauled & modernised

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Gjdpfx Aszg Dx Usl Ueuh Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: excellent (used), functionality: fully functional, overall weight: 12,000 kg, Untha RS 100-150 kW. Gusdpfoz Dw Syox Al Ush Engines: 2 x 75 kW. The machine has undergone a complete overhaul. New blades, bearings, seals, and electrical controls. Fully functional. Equipment: Perforated screen. Electrical cabinet. Base frame. More technical information and price available upon request.

Condition: used, Year of construction: 2011, operating hours: 300 h, functionality: fully functional, type of input current: three-phase, power: 30 kW (40.79 HP), input voltage: 400 V, filling opening width: 1,350 mm, filling opening length: 1,035 mm, Used DECOVAL 4-shaft industrial shredder (Year 2011). Designed for efficient processing and shredding of plastic waste materials. Heavy-duty 3.25-ton machine equipped with two 11 kW shredding motors and two 4 kW pusher/feeder motors (total power 30 kW). Operated by a Siemens LOGO PLC, which controls automatic reverse/anti-jamming cycles. Comes complete with the original, comprehensive technical operation and service manual. Gedozqy Hiopfx Al Usuh

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98 EZ100/2675, overall weight: 4,000 kg, number of blades: 68, total length: 2,800 mm, total height: 2,500 mm, control cabinet length: 500 mm, control cabinet width: 500 mm, control cabinet height: 1,000 mm, total width: 2,000 mm, rotor length: 1,000 mm, power: 30 kW (40.79 HP), type of input current: three-phase, year of last overhaul: 2025, working width: 1,000 mm, sieve perforation: 15 mm, For sale is an ARP single-shaft shredder type EZ 100 in operational condition, ideally suited for applications in the recycling industry, plastics processing, wood preparation, as well as for industrial size reduction processes. The machine is equipped with a hydraulic feed system for consistent material intake and a robust cutting system for continuous operation. Gjdpfx Aoyiuv Dol Ujuh

Condition: used, Year of construction: 2008, machine/vehicle number: 1462, number of blades: 73, LINDNER MICROMAT 1500 – 75 kW – 2008 – OPERATIONAL MACHINE, TESTING POSSIBLE For sale: a Lindner Micromat 1500 single-shaft shredder from the renowned Austrian company, Lindner Recyclingtech. This machine has a power output of 75 kW and was manufactured in 2008. It is designed for the industrial shredding of plastics. Technical specifications: Manufacturer: Lindner Recyclingtech Guodpfez Ayayex Al Ujh Model: Micromat 1500 Year of manufacture: 2008 Power: 75 kW Power supply: 400 V / 50 Hz Machine number: 1462 Country of origin: Austria CE marking The machine is currently connected to an operational production line. It is possible to start and test the shredder directly in the hall, under real operating conditions. Arrangements can be made in advance for an inspection and a demonstration of the machine's operation in the hall.

Condition: used, Year of construction: 2008, machine/vehicle number: 1395, number of blades: 138, input voltage: 400 V, FOR SALE – LINDNER MICROMAT 2200 – 132 kW – 2008 For sale: an industrial shredder, the Lindner Micromat 2200, from the reputable Austrian company Lindner Recyclingtech. This machine is designed for the industrial shredding and processing of plastics and other waste materials. Technical specifications: Manufacturer: Lindner Recyclingtech Model: Micromat 2200 Year of manufacture: 2008 Power: 132 kW Application: shredding plastics / recycling Country of origin: Austria Machine condition The machine was used in an industrial setting. It is currently disconnected from the production line and prepared for sale. Due to its current condition, it is not possible to conduct an operational test or on-site machine test. Godsz Ay Dfjpfx Al Ueuh Prior to purchase, there is an opportunity to inspect the equipment after scheduling an appointment. Interested parties are requested to contact us for further information, photos, and to arrange a viewing appointment.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Shredder, granulator, for beech wood waste, cardboard, paper waste, pallets Manufacturer: Vecoplan Type: VAZ 145/135 Year of manufacture: 1988 Motor: 22 kW Gsdpfx Aljz Aaq Es Usuh with sliding plate Infeed width: 1305 mm Infeed length: 1450 mm Rotor diameter: 370 mm Number of tools: 22 Rotor speed: 83 rpm Feed rate: 300-500 kg/hour

Condition: used, Double-shaft shredder Drive 37.50 KW Gujdjz Hxgwjpfx Al Ujh

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 9825, The 2024 general overhaul includes, among other things, the die head, hydraulic nut, bearings, main shaft, oil pump with filter, and synthetic oil. Only the steel housing is older but is in excellent condition. The images of the production line in the hall date from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h L/D ratio: 3.67:1 MACHINE DETAILS Dimensions of press (W x H): 1,450 x 1,900 mm Diameter of press: 2750 mm Insertion depth: 6 mm Gsdpezaricjfx Al Uouh Press length: 22 mm Year of manufacture of motor: 2024 Year of manufacture of cooler with sieve: 2015 Year of manufacture of conveyor belt: 2015 Year of manufacture of feed screw: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die head Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies, 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new thrust piece (main shaft) Documentation of overhauled and renewed parts