Sheet metal folder

KRAMER AMLs 1000/2

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch Bedpfx Ajlb I Dajp Isdd - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Steered axles Y1,Y2,X axis Control Esa S630 control Bsdpfxjw Hx Rzo Ap Iedd Including Wila Sealing stamp

Condition: new, round material 30 x 1 mm square material 30 x 30 x 1 mm 16 mm 30 x 10 mm speeds 9 U/min Bjdpeh D Svnsfx Ap Isdd total power requirement 1,1 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Bdjdpfxew Rm Sas Ap Ijd Remote control connection: yes

Condition: new, Technical data: Working length: 1020 mm Max. sheet thickness: 2.5 mm Max. opening width: 48 mm Bending angle: 0 - 135° Width: 1350 mm Depth: 820 mm Bdjdect Rzbepfx Ap Iod Height: 1140 mm Weight approx.: 285 kg Features: - Versatile bending machine for sheet metal workshops and repair shops - Robust construction in a modern design - Easy adjustment of the upper die using a foot pedal, leaving hands free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper die for a wide range of bending options - Optimal price-performance ratio - Quick and easy bending process using a handle - Non-slip rubber coating on the foot pedal for safe operation - Easy adjustment of the lower die to the respective sheet thickness - High upper die for producing profiles with high hems

Condition: ready for operation (used), Year of construction: 1951, Large working width: 1250 mm for sheets up to: 1.75 mm opening width of upper beam: 70 mm adjustability of bending beam: 50 mm space required: 1880 x 740 x 1140 mm Bedsv D E R Dspfx Ap Iodd

Condition: new, Bernardo swivel bending machine with segmented upper, lower, and bending beam TB 1020 Flex Working length 1020 mm Max. sheet thickness (400 N/mm2) 2.0 mm Max. opening width with segments 48 mm Max. opening width without segments 150 mm Max. clearance height closed 125 mm Bending angle 0 – 135° Back gauge 600 mm Working height 900 mm Width 1400 mm Depth* 1070 mm Height 1260 mm Weight approx. 430 kg * with back gauge Features Piano inserts in the upper, lower, and bending beam provide a large number of bending possibilities. Casing and special profiles with opposing bends can be easily produced with these models. Universally applicable bending machines for sheet metal workshops and repair shops. Simple swiveling movement of the bending beam via a handle. Easy adjustment of the upper beam for efficient work. High upper beam for producing high-flanged profiles. Large-sized flat guide for precise work. An auxiliary cylinder supports the bending process during hemming. Scope of delivery Segmented upper, lower, and bending beam Bsdpfx Aod Hxm Isp Ijdd Back gauge Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 270 mm

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 45/90 m/min 120 mm 120 mm Bjdpfx Aop Scqyep Iedd 190 mm Impact energy 170 mm connected load frequency 400 Volt total power requirement 1,1 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, cutting diameter 225 mm saw band length 2455 mm table height 850 mm cutting width 245 x 150 mm cutting speed 45/90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 90 mm 90 mm 145 mm Impact energy 145 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,2 t dimensions 1,43 x 0,72 x 1,7 m Bdedpfxegxi D To Ap Ied Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 1,020 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, overall weight: 340 kg, total length: 1,350 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Top and bottom blades removable in segments Includes manual backstop PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2.5 mm Max. working length ----- 1020 mm Max. opening width ----- 46 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Bedpfega T A Dox Ap Iedd Max. bending angle ----- 0 - 135 degrees Weight ----- 340 KG Width ----- 1350 mm Depth ----- 850 mm Height ----- 1175 mm