Wide belt sander through-feed

KUNDIG ENORM WIN

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Pjdpfx Aeu Agh Ssgkjpu Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Psdst Tqy Eepfx Agkepu Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: like new (used), - machine in stock - after a technical review - very good condition - ideal for the production of chairs Ppedpsd Dc E Ajfx Agksu   TECHNICAL PARAMETERS: - 7.5 kW main engine - two dugouts - pneumatic derrick control - pneumatic digging - wheel diameter 850 mm - 40 mm tape width - maximum length of the element 1300 mm - maximum width of the element 800 mm - maximum height 120 mm - two pneumatic side clamps - two pneumatic working distances - continuous feed regulation - hydraulic feed - 1.85 kW pump motor - receiving conveyor 180 mm x 2000 mm - 0.25 kW belt conveyor - central lubrication   Machine dimensions: - length 400 cm - 230 cm wide - height 250 cm - weight ~ 2000 kg

Condition: excellent (used), Year of construction: 1999, The machine is equipped with a magazine of elements. The parts are returned to the operator. Ppjdpett Ddcjfx Agkou Equipped with 17 spindles

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AA0985, input voltage: 400 V, SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER SAC MOD. 4R 300 - CE RULES - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. Ppedpfx Agsx Riccjkju - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each - Volt 400/50 - S/N AA0985 - Year 2001

Condition: excellent (used), Year of construction: 1994, Device description: Psdpswyb Ntefx Agkspu grinding top/bottom working width 200mm electric adjustment of the upper unit star/delta start-up installed power 14kW pneumatic belt tensioning belt oscillation working height up to 150mm

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm Pedpfx Aoxfl Easgkopu max. sanding height 200 mm year of manufacture 1994 with CE mark

Condition: good (used), Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm Ppsdpfx Asb A Hkysgkeu

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 13,880 h, load capacity: 3,000 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,950 mm, fork length: 1,150 mm, drive type: Elektro, Four-way sideloader Mast type: Triplex Technical condition: good Pedpfeu Ac D Nex Agkepu Description: Battery from 2019 Fork positioner,

Condition: excellent (used), Top and bottom sander SAC 4R-300 Working width: 300 mm Working height: 2.5–150 mm 4 sanding units 2x bottom unit 2×5.5 kW 2x top unit 2×5.5 kW Top and bottom cleaning brush 2×0.55 kW Feed speed adjustable via frequency inverter: 4–16 m/min Electric sanding height adjustment Can be integrated into a line with other machines CE certificate Pedsygrb Sepfx Agkjpu