Ventilation roll forming machine

LLC Evolutioner LFM ventilation lock former

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Prsdpsf Eywwjfx Agzof Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, Year of construction: 2025, CFM-01 MACHINE FOR CUTTING PROFILES The machine has been designed for cutting profiles used for P20 or P30 ventilation ducts and fittings. The cutting quality is very high, it does not leave any burrs after cutting. Cutting that can be made in any length thanks to the ruler adjustable from 0-1500 mm. The diamond blade used is many times longer than band saws. The machine has a system of pneumatic cylinders responsible for the movement of the disc and material pressure. Thanks to the foot pedal, it provides quick and convenient cutting of profiles. Prjdpfxjfwxxne Agzef

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Podpfx Agjqzibtezjrf Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar INCLUDED drag loading system

Condition: new, Metallkraft FSBM 1020-20 S2 Manual swing bending machine With workpiece clamping by means of foot pedal. DESCRIPTION - Workpiece clamping by foot pedal, leaving both hands free for material feeding - Different tool variants available E, S2, HS2 and HSG - The powerful auxiliary cylinder facilitates bending - Wide clearance between upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam easily adjustable by means of easy-grip knurled screws - Adjustment of material thickness by knurled screw - Adjustable stop for bending angle Equipment details: - With segmented sharp bending tools, segmented bending bar and continuous bed support TECHNICAL DATA General information Working width max.: 1020mm Bending angle max.: 135 Segmentaufteilung: 25-30-35-40-45-50-75-100-150-200-270mm Dimensions and weights Length (product) approx.: 1350mm width/depth (product) approx.: 800mm Height (product) approx.: 1130mm Weight (net) approx.: 325kg Bending capacity bending capacity 235 N/mm²: 2,0mm Bending capacity 700 N/mm²: 1,2mm Explanation Bending capacity: 700 N/mm²Hardened upper tools are required for bending VA Bending capacity aluminum: 2.4mm Made in China Psdpekzk Exjfx Agzjrf PLEASE ASK FOR OTHER MODELS

Condition: new, Technical specifications Two-phase mains voltage : 400 V. Mains frequency : 50/60 Hz. Max. puncture current : 9700 A. No-load voltage MAX : 2,6 V. Thickness MAX tacking 2 sides : 3+3 mm. Max electrode force : 190 daN. Prsdpfx Agjhzg Ihszof Arms projection : 330 mm. Nominal power X=50% : 22 kw. Nominal power X=50% : 15 kw. Power factor : 0.7 (cosphi). Intermittence ratio : 15%. Dimensions : 79 - 32 - 128 cm. Weight : 118 kg. Resistance welder (tacking machine) with column, swinging arm, with digital microprocessor control. The multifunction LCD digital panel allows to operate: in EASY mode (setting of current and tacking time); in EXPERT mode (setting of different tacking parameters) with the possibility to save up to 20 customized programs. Continuous and pulsed operation guarantees excellent welds on various types of steels. Features: adjustment of the welding current (%), welding time (cycles), pressure and speed of electrode closing choice of various welding cycle parameters (approach time, ramp time, welding time, pause time and number of pulses) easy-to-read LCD display pneumatic drive thermal protection with signaling air flow regulation for the slowing down of the arms closure Model requires cooling

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. Prodpfx Aewivn Negzef -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools *

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Pjdpfxou Tp N Do Agzorf Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: new, prebending: 13,0sheet length: 3100sheet thickness: 16,0total power requirements: 17,5weight approx.: 11,6messurements (LxWxH): 5,31x1,66x1,59 Poded Auacjpfx Agzorf

Condition: new, Year of construction: 2025, functionality: fully functional, coil weight: 15,000 kg, sheet thickness steel (max.): 4 mm, outer diameter: 1,600 mm, coil width: 1,600 mm, type of input current: AC, Coil Slitting Line is used to cut the wider coils into the much more narrow coil strips, in the given dimensions. Servo Steel provides cost-effective Coil Slitting Lines, in any characteristics, according to the customer requirements. Pjdpfx Asvmgn Negzorf All parts of the Coil Slitting Line are manufactures in our facility from A to Z. Starting from the Decoiler (Uncoiler), Straightener and Coil Loading Car, up to the Servo Feeder, Slitting Unit and Recoiler can be controlled from one point. The system is controlled by PLC system, set in the customer language.

Condition: new, The KHS E 1000 Manual Guillotine Shear is an essential tool in any locksmith's shop, designed for the precise and robust cutting of large steel plates. This classic manual plate shear features a sturdy cast-iron construction, ensuring durability that can withstand the demands of multiple generations of use. With a working length of 1,040 mm and the ability to handle plate thicknesses up to 1.5 mm while maintaining safety, it combines efficiency with operator comfort thanks to its counterweights and adjustable table stop. The KHS E 1000 also includes a conveniently adjustable back-gauge, making it easier to produce consistent cuts. Request a quote today to enhance your sheet metal processing capabilities with this reliable manual guillotine shear, a perfect fit for any guillotine shears category. Pedjn D Ehvjpfx Agzorf