Briquetting press

mütek MFP

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Fpedpfx Afsd Nnwlsnsc Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Fpodpfxjcnw U Do Afnoc Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Equipment and technical specifications: - Cutting length: 2800 mm Fpjdpfx Afexuxg Nsnsc - Cutting width: 1250 mm - Saw blade swivel range: 0° - 45° - Max. saw blade diameter: 350 mm - Saw blade speeds: 3000 / 4000 / 5000 / 6000 rpm - with scoring saw unit - with parallelogram guard - with extraction port 80 mm - with table extension 800 mm - Motor 5.5 kW - with brake motor Weight approx. 850 kg Availability: approx. end of January 2026 Location: Hesse

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Fpedpfx Afsv Rpxljnoc Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors Fjdpfxegvqz Ie Afnopc - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l

Condition: used, mileage: 375,516 km, power: 107 kW (145.48 HP), first registration: 04/2008, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, * Iveco Daily 35 C 15 * Flatbed Long * Twin tires Fpjdpfx Asr Npgtsfnsc * Manual gearbox * FIN : ZCFC35A8005730261 * Engine type : F1CE0481F * Kw : 107 * Displacement : 2998 ccm * Tare weight : 2470 Kg * Payload : 955 Kg * Total weight : 3500 Kg * Interior flatbed length : 4,10 m * Interior flatbed width : 2.10 m * Vehicle length : 6820 mm * Vehicle width : 2200 mm * Vehicle height : 3100 mm * Tires : 195 / 75 R 16 * Differential taxed * All data without guarantee

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planing shaft: Tersa Number of knives: 4 Height adjustment: electric display planing thickness: digital display Feed speed: infinitely variable 5 - 22 m/min Feed roller: steel pressure beam: jointed Extraction roller: Rubber 2 x Fodel D Rxfspfx Afnepc table rollers: no engine power: 9,2 kW suction connection: 160mm Machine length: 1200mm Machine width: 1200mm Weight: 1000kg

Condition: like new (used), Year of construction: 2022, Multitel SMX170 crawler work platform - 16.7m working height - 200kg load capacity - 2,200kg dead weight - BJ2022 // For further details please contact us ! Fsdpoudvifofx Afnspc

Condition: used, machine/vehicle number: 007361, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Fpedpsx A Tibofx Afnoc Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 3

Condition: used, Year of construction: 1979, functionality: fully functional, working height: 2,400 mm, working width: 3,500 mm, power: 1.5 kW (2.04 HP), 3 vertical, 2 lateral pressure cylinders Condition: function tested, very good, used Fodpfxjw Hlt Ns Afnopc