Planing line

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting range round steel at 90°: 400 mm, cutting length (max.): 760 mm, working height: 720 mm, saw band length: 5,920 mm, TECHNICAL DETAILS Saw band dimensions: 5,920 x 41 x 1.3 mm Cutting speed: steplessly adjustable (1:7) Working range (round): max. 400 mm Kedpfx Absyzn Hbogedk Working range (square): 400 x 370 mm Cutting length (single stroke): 10 - 760 mm Cutting length (multiple strokes): max. 9,999.9 mm Working height: 720 mm Clamping force: 3,600 N Minimum finished part length: 10 mm (35 mm vertical) Note: Dismantling and loading can be offered by the seller at an additional cost. Roller conveyor is not included.

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Ksdpfx Abovxi Ddegodk Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Year of construction: 2003, operating hours: 10,600 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 6094, Equipment: centralized greasing system, Spare parts donor! TECHNICAL DETAILS Kjdpjyzznlsfx Abgsdk Coarse screen deck: 120/150 Fine screen deck: 10/25 MACHINE DETAILS Generator voltage: 400 V / 50 Hz Weight: 20,000 kg Engine operating hours: approx. 10,600 h EQUIPMENT Trailer Hopper Magnetic drum for mid-size fraction conveyor Magnetic drum for oversize fraction conveyor Clip-on chute Hydraulic rear support Direct connection Central lubrication system Generator 50 mm drawbar eye Note: The engine starts but shuts off again after a while. Presumably there is a fuel issue. The generator produces power. The machine is currently not roadworthy as it has been stationary for a long time. Road registration is currently not possible.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,357 h, functionality: fully functional, spindle speed (max.): 12,000 rpm, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Series 31i-Model A5, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 520 mm Z-axis travel: 510 mm Milling spindle: 12,000 rpm Tool holder: Capto C6 Rapid traverse: 60 m/min MACHINE DETAILS Control: Fanuc Series 31i-Model A5 Chain tool magazine: 48 positions Additional magazine: 90 positions Operating hours Total operating hours: approx. 48,974 h Machining time: 19,357 h EQUIPMENT Coolant system Kedpfxsyw I Htj Abgsdk Chip conveyor Note: Clara extraction unit is not included in the scope of delivery.

Condition: new, Technical data: Max saw blade diameter: 350 mm Min saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring tool diameter: 120 mm Scoring tool spindle diameter: 20 mm Undercutter on a separate engine Tilting saw from 0° to 45° Manual adjustment of the angle of inclination of the saw blade Electric height adjustment of the saw Trolley length: 3200 mm Cart lock Eccentric clamp Table extensions Table height: 875 mm Culag: 120mm Ruler 3170 mm long with 2 stops Extraction port diameter: 125 mm Cover Safety switch Power: 400V Total power: 6.5 kW Machine dimensions Kedpfxomiii Se Abgodk Length: 3450mm Width: 3500mm Height: 1300mm

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distance X: 1,000 mm Travel distance Y: 500 mm Travel distance Z: 500 mm Table dimensions: 1,150 x 490 mm Number of tool positions in the magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions & Weight Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Weight: 4,200 kg Operating Hours Automatic operation: 8,523 h Control on-time: 71,860 h EQUIPMENT Technical documentation Spare parts (as shown in the pictures) Kodpfjyn Nwtsx Abgodk Note: Only a 7.5t truck can turn around on the company premises. It is recommended to send a smaller truck for collection.

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 822441, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN TNC 410 PA, spindle speed (max.): 6,000 rpm, No reserve price - guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distances Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 600 mm Spindle speed range: 40–6,000 rpm Drive power: 13 kW Spindle taper: BT 40 Number of tool stations in the tool changer: 22 Rapid traverse X and Y axes: 40 m/min Rapid traverse Z axis: 30 m/min Work table Length: 1,150 mm Width: 490 mm MACHINE DETAILS Control system: HEIDENHAIN TNC 410 PA Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,400 x 2,400 mm Weight: 4,800 kg Kodpfxeyn Nvve Abgedk EQUIPMENT 3D probe Note: The machine vices mounted on the work table and the tool holders, including the tools installed in the tool magazine and spindle, are not included in the scope of sale and delivery. The oil mist extractor, which may be visible in the photos, is also not included in the scope of sale and delivery.

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- Kdsdoxpn T Uopfx Abgok > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Bidding commits you to timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Kdsdsyn Ibwjpfx Abgek TECHNICAL DETAILS Contents: - Mounted vice (jaw width: 150 mm) - Belt sander (Manufacturer: FERM, belt width: 100 mm, disc diameter: 150 mm) - Clamping jaws - Dies - Tap sets MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3000 x 1100 x 1200 mm Weight: 350 kg Note: The sale does not include the drill press or tapping arm currently on the workbench. External reference: Pieper – Lot 67

Condition: not inspected (used), functionality: unexamined, throat depth: 1,200 mm, machine/vehicle number: 94023588, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Reach: 1200 mm MACHINE DETAILS Dimensions & Weight Kdodpfx Aboyn H Rdogsk Dimensions (L x W x H): 1200 x 1000 x 700 mm Machine weight: 80 kg External reference: Pieper - Lot 68

Condition: used, Year of construction: 1994, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 Kdsdpfsrm Rxwsx Abgjk - Working width 230 mm - Working height 120 mm. Composition : - horizontal bottom - vertical right - vertical left - horizontal top - horizontal bottom Year 1994 V 380/50

Condition: not inspected (used), functionality: unexamined, plate length: 630 mm, plate width: 630 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Plate dimensions: 630 mm x 630 mm Kedpfjyn H Hlex Abgsdk MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 630 x 630 x 950 mm Weight: 150 kg External reference: Pieper - Lot 75

Condition: not inspected (used), functionality: unexamined, plate length: 630 mm, plate width: 630 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Plate dimensions: 630 mm x 630 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 630 x 630 x 920 mm Weight: 100 kg Kdodpoyn Hwqofx Abgjk External reference: Pieper - Lot 103

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Ksdpewa Ax Asfx Abgodk

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect within the specified period, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Available in different sizes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 50 mm Weight: 30 kg Kdodpfxoyn Hq Ro Abgek External reference: Pieper - Lot 125