Water separator and oil remover machine

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Ndedpfxeppyhto Agzof Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Year of construction: 2021, condition: as good as new (ex-display), Colimatic Thermoformer 2021, As New Price € 29,990.00 Model - Thera 450 L Ndsdpevc Ilhofx Agzjf Only 10 hours on the machine, only used for tests. 415v / 50 hz PLC Siemens Speed up to 14 cycles/min Film from 80 my to 800 my Busch vacuum pump

Condition: excellent (used), Urschel GRL strip cutter for French fries. The machine has been serviced and is ready to work. SPECIFICATIONS Length: . . . . . . . . . . . . . . . . . . . . . . 59.25" (1505 mm) Ndsdpfx Aov Srfqegzof Width: . . . . . . . . . . . . . . . . . . . . . . . 63.38" (1610 mm) Height: . . . . . . . . . . . . . . . . . . . . . . 53.24" (1352 mm) Net Weight: . . . . . . . . . . . . . . . . . . . . . 906 lb (411 kg) Motor: . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HP (1.5 kW) The Urschel® Model GRL is designed specifically for strip cutting plain and crinkle cut potato strips. Transverse fracturing and feathered edges of french fry pieces are minimized and longer cuts are produced with greatly reduced scrap. The machine features continuous operation for uninterrupted production, and simplified design for easy cleanup and maintenance. Maximum product infeed is 9" (229 mm) in length.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0509, 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Ndodpownx Ngefx Agzsf Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring.

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Ndodsu Av H Dspfx Agzjf

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, AS-07251-Alfa Laval Clarifier Module 10 m3/h ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) CLARIFIER MODULE, 316SS. Minimum capacity: 10,000 L/H Offer of 4 identical units Max bowl speed: 7200 RPM, rated at 10,000 LPH, bowl volume 15 L, sludge capacity 9.4 L, liquid discharged under pressure, solids discharge pump with cyclone tank, 35 KW motor 460/3/60/1728 RPM, Pure SOx scrubber, unitized on a common skid with all valves, piping, control panel, tools, spares and manual Ndedjw Ap I Aepfx Agzjf Year of Manufacture: 2017

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Ndjdpfx Agjv T I Evjzjf Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: new, functionality: fully functional, For gentle preservation of carbonated and non-carbonated liquid foods in pre-filled bottles. Depending on the bottle shape, between 60-120 l/h possible, regulation to the desired product temperature or by means of a timer. Basin cover supported by gas pressure spring, fully insulated, on castors with storage compartment, various bottle shapes can be used (milk bottles, beer bottles, preserving jars etc.), dry run protection, heating phase approx. 1h (20°-90°), perforated base as standard, adjustable heat retention time (0-99 min) Ndodpfxotpg Dme Agzef Technical data: Water capacity ~115 l Weight 143 (= empty weight) kg Height 1,090 (=working height) mm Width 705 mm Length 1080 mm Electrical fuse protection 16 A Electrical connection 400V 50Hz (3 phases) Electrical power 9.15 kW Nominal capacity l/h up to 120 l/h

Condition: used, System: Mobile dewatering system, decanter, and mobile centrifuge - used Application: Sludge dewatering Type: Alfa Laval DSNX 4250 Year of manufacture: 1996 Ndsdpfx Agewmwrqezef Operating hours: 29,200 Generator operating hours: 31,640 (see enclosed nameplate)

Condition: used, functionality: fully functional, machine/vehicle number: B11400955, Year of construction: 2019, operating hours: 14,500 h, load capacity: 45,000 kg, lifting height: 14,100 mm, fuel type: diesel, mast type: telescopic, construction height: 5,250 mm, power: 285 kW (387.49 HP), empty load weight: 108,500 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B11400955 Mast type: Telescopic Transmission: ZF 5WG 311 Technical condition: good Nedpfxexlvtzo Agzedf Front tyres type: pneumatic Front tyres size: 21.00-35 Front tyres condition: 40 - 60% Rear tyres type: pneumatic Rear tyres size: 21.00-35 Rear tyres condition: 40 - 60% Description: Barge handling, good running and working condition. Sideshift, Heating, full cab, air conditioning, Barge handling, Solas scale, extra container frame, additional heating, 30° stop, pile slope, stabilizer, camera, central lubrication