Pellet production line

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 511902Y01661, Year of construction: 2022, operating hours: 8,090 h, load capacity: 1,400 kg, battery voltage: 48 V, empty load weight: 2,752 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Hjdjzgr Dlopfx Aqrsp MACHINE DETAILS Battery weight max./min.: 986 kg / 892 kg Battery voltage: 48 V Drive power: 6.5 kW Dimensions & Weight Dimensions (L x W x H): 2,600 x 1,300 x 3,400 mm Unladen weight: 2,752 kg Operating hours: 8,090 h EQUIPMENT Battery charger Additional battery Exchange frame for 2nd battery Note: The forklift is 3,400 mm high. The seller cannot disassemble it. The buyer must therefore either collect it with a suitable low-loader or disassemble the forklift themselves.

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Hedexazhtopfx Aqrep

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the machine on time in week 30 of 2026! TECHNICAL DETAILS Travel range X-axis: 1,000 mm Travel range Y-axis: 900 mm Travel range Z-axis: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Dimensions & Weight Machine: 4800 x 2980 x 3150 – 21.5 t Tool magazine: 4500 x 2800 x 3150 - 6–7 t Chip conveyor: 4500 x 1600 x 2400 – 2 t, including high-pressure pump Hjdpfxjzd Tape Aqrep Repo: 3000 x 1200 x 1500 mm, 0–0.5 t Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools 2 pallets Balluff writing/reading system NC table Absolute scales in X, Y and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Hedpfjzdkhkex Aqrsp Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Shipping packages: 3 EQUIPMENT External coolant system Chip conveyor Tool magazine (30 pieces)

Condition: new, Year of construction: 2024, Magnetic separator for chip transport lines Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Hodpfx Aocqvhwjqrep Pipe diameter: 180 mm Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2009, operating hours: 3,275 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine with only 3,275 spindle hours! Hodpfx Aezdkgaeqrop TECHNICAL DETAILS Travel in X-axis: 1,100 mm Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Table size: 1,300 x 600 mm T-slots: 6 (size 18) Maximum table load: 1,000 kg Spindle speed range: 60 - 12,000 rpm Drive power: 10 / 17 kW Spindle mounting: ISO 40 / DIN 69871A Magazine: 32 positions MACHINE DETAILS Drive power: 10 / 17 kW Internal cooling (IKZ): 20 bar Coolant tank volume: 480 l Spindle hours: 3,275 h Machine operating hours: 15,883 h Control operating hours: 17,706 h

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 216327, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table length: 2,000 mm Table width: 510 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Hodpfxjzdf Dhj Aqrjp Control system: Mazatrol 640M Operating time according to control system display: 40,843 h Dimensions & Weight Dimensions (L x W x H): 5,120 x 3,000 x 2,800 mm Unladen weight: 8,250 kg EQUIPMENT Chip conveyor Tool magazine with 30 positions Tools included

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hjdpfstvau Ajx Aqrep Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, center width: 1,500 mm, center height: 250 mm, swing diameter over bed slide: 500 mm, spindle speed (max.): 2,800 rpm, controller model: Monforts Control System MTC K, The machine was overhauled in 2017! The corresponding invoices are available upon request. Hjdpozdfzajfx Aqrep TECHNICAL DETAILS Swinging diameter over bed: 500 mm Swinging diameter over slide: 290 mm Distance between centers: 1,500 mm Spindle bore: 70 mm Center height: 250 mm Spindle speed: 2 - 2,800 rpm MACHINE DETAILS Control system: Monforts Control System MTC K Control method: Teach-in Dimensions & Weight Dimensions (L x W x H): 3,350 x 1,550 x 1,800 mm Net weight: 3,300 kg Transport packages: 1 EQUIPMENT Fixed steady rest 3-jaw chuck Documentation CE marking

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Table length: 1,500 mm Table width: 660 mm Tool holder: ISO40 Max. spindle speed: 10,000 rpm MACHINE DETAILS Control system: Fanuc 18i-MB Power: 38.4 kW Hjdpfx Aezdfgpjqrep Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT External coolant system Chip conveyor Tool magazine with 32 positions CE marking

Condition: new, - Shaft diameter 50 mm - Upper roller hydraulically driven - Three rollers powered - Digital display - Can be used horizontally/vertically - Foot switch - Emergency stop - Documentation Hjdpfxsgg N Twj Aqrop - 400V

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, pressing force: 42 t, empty load weight: 1,000 kg, TECHNICAL DETAILS Bending capacity: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Stroke length: 300 mm Stroke width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Hodpfxjzdfb To Aqrop Shipping weight: 1,000 kg Shipping packages: 2 units EQUIPMENT Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, actuation type: hydraulic, number of rollers: 3, shaft diameter: 105 mm, empty load weight: 1,000 kg, TECHNICAL DETAILS Power: 3.0 kW Shaft diameter: 105 mm Number of rollers: 3 Number of driven rollers: 3 MACHINE DETAILS Control: Conventional Hodpfx Ajzdd N Noqrep Drive: Hydraulic Vertical/Horizontal: Horizontal Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,300 mm Unladen weight: 1,000 kg EQUIPMENT Additional rollers

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Hodpfx Ajx Tpzdeqrsp

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel in X-axis: 271 mm Travel in Y-axis: 600 mm Spindle bore: 62 mm Maximum spindle speed: 3,500 rpm Hjdpjzdd Npjfx Aqrsp MACHINE DETAILS Control system manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Net weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Bar feeder Driven tools C-axis Note: The parameters are stored, but are lost if the power supply is interrupted. As long as the power supply is maintained, this is not a problem.