Column drill Gillardon GB20

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Auction of a Weinig Unimat 500! The machine will remain in operation until mid-May. Viewing can be arranged by appointment! Kodpfsyh Uw Nsx Ab Tsln

Condition: used, Year of construction: 2015, operating hours: 2,485 h, machine/vehicle number: 0300212166, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 10.850 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 2.050 cm Max. horizontal reach: 1210 m Transport dimensions (LxWxH): 8.55x2.45x2.85 Please contact PFEIFER GROUP for more information Ksdpotr Itbsfx Ab Toln

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 560123, functionality: fully functional, volume flow: 16,000 m³/h, total length: 12,000 mm, total width: 2,400 mm, Equipment: CE marking, TECHNICAL DETAILS Capacity: 16,000 m³/h Number of filter bags: 180 pcs Connection diameter: 600 mm Kjdpjyh Nyfefx Ab Tsln Main fan: 22 pcs MACHINE DETAILS Dimensions (L x W): 12,000 x 2,400 mm EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 5/1-107, functionality: fully functional, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Equipment: CE marking, The machine has the following configuration: 1. Pre-milling unit (tools included) 2. Glue application unit 3. Pressure rollers (tools included) Kledpfx Ajyh Nt Sob Tjn 4. End trimming unit (tools included) 5. Not specified (tools included) 6. Corner rounding unit (tools included) 7. Radius scraping unit (tools included) 8. Not specified (tools included) 9. Flat scraping unit (tools included) MACHINE DETAILS Number of units: 9 Voltage: 400 V Power consumption: 21.9 A Main fuse: 50 A Dimensions Dimensions (L x W x H): 6,100 x 1,440 x 1,730 mm Transport packages: 1 EQUIPMENT CE marking

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Pole-changing motor: 0.8/1.5 kW Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device - Free-cutting function Klsdpfxjf Ey Aus Ab Ten - LED lamp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, controller model: Delem DA-41s, bending force (max.): 40 t, working width: 1,800 mm, stroke length: 100 mm, number of axes: 4, TECHNICAL DETAILS Travel distance: 1800 mm Max. stroke: 100 mm Pressing force: 40 t Number of axes: 4 MACHINE DETAILS Control: Delem DA-41s Dimensions & Weight Dimensions (L x W x H): 2,450 x 1,900 x 2,140 mm Transport weight: 5,500 kg Number of transport packages: 2 Connected load: 4.0 kW EQUIPMENT Tools Quick-release punch holder Kedpsyh Nrbjfx Ab Teln European-style tool holder type Finger guard

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Swing diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel X-axis: 271 mm Travel Y-axis: 600 mm Kjdpfjyh Npmsx Ab Tsln Spindle bore: 62 mm Max. spindle speed: 3,500 rpm MACHINE DETAILS CNC control manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Unladen weight: 5,000 kg Transport weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Bar feeder Driven tools C-axis

Year of construction: 2026, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: Klsdpfxsin Ey Ss Ab Ton - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: B8820, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), overall weight: 9,800 kg, TECHNICAL DETAILS Sheet thickness max.: 8 mm Working width max.: 3,100 mm Back gauge depth: 1,000 mm MACHINE DETAILS Kedpfx Aeyh Nl Iob Teln Control: CNC Power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,200 x 2,100 mm Weight: 9,800 kg Transport packages: 1 EQUIPMENT Electric backgauge Pneumatic sheet support system Fixed finger guard Motorized angle adjustment Motorized cutting gap adjustment Ball bearing table Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, turning diameter over bed slide: 630 mm, center height: 315 mm, center width: 8,000 mm, spindle speed (max.): 1,180 rpm, empty load weight: 9,000 kg, TECHNICAL DETAILS Kledsyh Nk Repfx Ab Ten Centre height: 315 mm Centre distance: 8,000 mm Swing diameter over bed: 630 mm Swing diameter over cross slide: 360 mm Bed width: 700 mm Spindle bore: 62 mm Max. spindle speed: 1,180 rpm MACHINE DETAILS Control: Conventional Connected load: 22.0 kW Dimensions & Weight Dimensions (L x W x H): 10,560 x 1,710 x 1,400 mm Unladen weight: 9,000 kg EQUIPMENT Digital readout

Condition: new, MAXION BTB 20 Bench drill Powerful MK2 bench drill with easy-scroll control wheel and large display. Digital drilling depth, piece counter, drill depth fine adjustment and LED light are already part of the standard equipment. Thus, the new BT20 combines innovative features with proven drive technology. Technical data Normal drilling capacity 20 mm Tapping capacity M 16 spindle MK 2 drilling depth 100 mm Ksdpfxsd Tf T Tj Ab Toln throat 250 mm spindle / table 20 - 430 mm spindle / base plate 645 mm table surface 450 x 315 mm T-slot width 12 mm column diameter 90 mm total height 1.100 mm weight 160 kg Motor pole-changing 0.6 / 1.2 kW Optional accessories: Drilling package Tapping device with digital depth display Cross table MF3 Base cabinet Electric cooling device Spindle speeds infinitely variable 100 - 1,800 rpm or 200 - 3,600 rpm. Please specify the range of revolutions when making your inquiry. Note: ALSO AVAILABLE AS A COLUMN DRILLING MACHINE

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 46876, Year of construction: 2019, operating hours: 15,564 h, load capacity: 2,500 kg, lifting height: 5,570 mm, free lift: 1,580 mm, fork length: 1,060 mm, fork width: 1,360 mm, TECHNICAL DETAILS Lifting capacity: 2,500 kg Lift height: 5,570 mm Free lift: 1,580 mm Overall height: 2,450 mm Fork length: 1,060 mm Fork width: 1,360 mm Minimum fork width: 290 mm MACHINE DETAILS Power type: electric Ksdpfx Abeyh Nhpj Tjln Mast type: Triplex Dimensions & Weight Dimensions (L x W x H): 1,530 x 1,500 x 2,460 mm Unladen weight: 6,500 kg Battery year: 2025 Battery capacity: 930 Ah Operating hours: 15,564 h EQUIPMENT Side shift Fork adjustment New battery Half cabin Work lights Free lift

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 517314V00020, Year of construction: 2019, operating hours: 17,191 h, load capacity: 1,600 kg, lifting height: 5,220 mm, free lift: 1,700 mm, fuel type: gas, fork length: 1,150 mm, TECHNICAL DETAILS Lifting capacity: 1,600 kg Lifting height: 5,220 mm Free lift: 1,700 mm Fork dimensions: 1,150 mm x 910 mm Minimum fork width: 200 mm MACHINE DETAILS Number of wheels: 4 Engine manufacturer: Still VW Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 2,975 mm x 1,099 mm x 2,260 mm Transport weight: 2,706 kg Operating hours: 17,191 h Klodpfxjyh Ngro Ab Tsn EQUIPMENT 4th valve for fork carriage Side shift Work lights Heater Non-marking tyres Full cabin

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min Kledpfxou U E T Ij Ab Ten feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,790 h, controller model: B&R APC 910, laser power: 3,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Laser power: 3,000 W Sheet thickness (steel): 20 mm Sheet thickness (stainless steel): 16 mm Sheet thickness (aluminium): 12 mm Travel speed: 100/140 m/min Accuracy: 0.1 mm MACHINE DETAILS Control: B&R APC 910 Connected load: 33 kVA Dimensions & Weight Space requirement: approx. 7,800 x 5,900 x 2,300 mm Machine weight: approx. 11,400 kg Controller power-on hours: 2,472 h Operating hours: 15,907 h Laser power-on hours: 7,790 h Kljdpfxjyhmxuo Ab Tjn EQUIPMENT Integrated solid-state laser TruDisk 3001 with 1 fiber output Fully automatic pallet changer (with light barrier) Enclosed machine frame with integrated components Motion unit for high-precision processing Drives with maintenance-free three-phase servo motors Sheet support accessible from both sides Enclosed beam guidance via laser light cable (fiber optic cable) Fully integrated chiller for laser and machine Integrated control cabinet Travelling fume extraction system Slag drawers 19" touch colour screen TruDisk power supply via machine Workspace lighting Positioning laser diode PierceLine FocusLine NitroLine Transport and installation device Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) TRUMPF Laser Fiber optic cable as per standard layout (laser placed directly next to machine) Excitation via pump diodes Laser power control Laser logbook function Universal cutting unit Pierce head strategy Protective glass against lens contamination ControlLine: Height control and detection of sheet outer edge Simple drawing module Easy workshop programming Quick reproduction Integrated TRUMPF technology data Auto shut-off Programmable cutting gas/pressure selection ContourLine FastLine Microweld Tele-service via Internet Microjoint - handling at the control panel Adjustable dynamics Data transfer RJ45 network connection and USB interface CE mark Compact extraction unit Machine enclosure with certified viewing windows Motorised front door and rear access Enclosed machine roof