CNC Morbidelli UNIV X5 HD31 5-axis

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain TNC 426 PB, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! Increased pressure to sell – especially attractive offer! TECHNICAL DETAILS Travel X-axis: 1,200 mm Travel Y-axis: 800 mm Travel Z-axis: 400 mm Machine table: 1,280 x 830 mm Number of T-slots: 3x 18 H10 Spindle speed: 9,000 rpm Spindle taper: SK40 Iaodpfxeypcw Ne Ab Tep Spindle power: 9 kW Spindle torque: 84 Nm Max. rapid traverse of linear axes: up to 30 m/min Tool changer: 24 stations MACHINE DETAILS CNC control: Heidenhain TNC 426 PB Connection data: 400 V / 50 Hz Connected load: 32 kVA Main fuse: 3x 63 A Weight: 8,500 kg

Condition: used, Year of construction: 2021, Working width: 410 mm Planer shaft: Strip knives Number of knives: 4 Planer table length: 2360 mm Planer table adjustment: Lever Chip removal display: Scale Hollow/pointed joint display: - Planer fence angle adjustable: Yes Motor power: 4.4 kW Machine length: 2360 mm Iodsxnhpgspfx Ab Toap Machine width: 860 mm Weight: 475 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) Ijdjypbx Ejpfx Ab Tsap FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Iaedpfxjyn Imye Ab Tjp Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: used, Year of construction: 1988, Max. working width: 630 mm; Number of knives: 4 pcs; Cutterhead: Tersa cutterhead; Motor brake: Yes; Max. thicknessing height: 240 mm; Min. thicknessing height: 3 mm; Max. chip removal: 8 mm; Thickness table adjustment: electric/manual with fine adjustment; Thickness display: mechanical numerical indicator; Fixed feed speed: 6/18 m/min; Thickness table spindles: 1 large; Infeed rollers: serrated steel; Outfeed rollers: steel; Soundproofing: Yes; Approx. weight: 900 kg; Motor power: 5.5 kW; Extraction diameter: 150 mm Storage location: Iaodsyq Sflepfx Ab Tsp

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper Isdpfx Ajym Uu Ujb Teap ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 15,020 h, machine/vehicle number: R1519130, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, travel distance X-axis: 3,000 mm, Equipment: cooling unit, dust extraction, TECHNICAL DETAILS Travel range X-axis: 3,000 mm Isdpfx Aeyrnz Sob Teap Max. sheet thickness steel: 20 mm Max. sheet thickness stainless steel: 20 mm MACHINE DETAILS Laser model: ByLaser 4400 Laser power: 4,400 W Laser cutting hours: 15,020 h Power-on hours: 32,602 h EQUIPMENT Chiller unit Dust extraction

Condition: ready for operation (used), Year of construction: 2016, operating hours: 12,118 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rotary table diameter: 500 mm, spindle speed (max.): 12,000 rpm, Machine already disassembled! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Max. spindle speed: 12,000 rpm Spindle motor power: 22 kW Spindle taper: BT40 Number of tool magazine slots: 40 MACHINE DETAILS Control manufacturer: HAAS Dimensions & Weight Dimensions (L x W x H): 4,014 x 3,046 x 3,048 mm Weight: 6,500 kg Operating Hours Power-on hours: 16,142 h Cutting hours: 12,118 h EQUIPMENT Central spindle cooling system 20 bar Filtration Iedpfx Asypbhteb Tjap Chip conveyor belt Workpiece probe Tool probe Robot interface Automatic (side) door Handheld control unit Cleaning pistol High-speed machining

Condition: ready for operation (used), Year of construction: 2006, operating hours: 45,559 h, functionality: fully functional, machine/vehicle number: 183519, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, overall weight: 11,350 kg, TECHNICAL DETAILS Iajdpfx Aboyn I Sco Tjp Worktable: Pallet size 500 x 500 mm Max. workpiece dimensions: 800 x 1,000 mm Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 740 mm Spindle diameter: 215 mm Feed rate: 1 – 60,000 mm/min Rapid traverse max.: 60 m/min Spindle speed range: 35 – 12,000 rpm Internal coolant supply: 70 bar MACHINE DETAILS Control model: Mazatrol PC Fusion CNC 640M Operating hours: 45,559 h Machine weight: approx. 11,350 kg EQUIPMENT Renishaw measuring probe Chip conveyor Tool magazine: 160 equipped positions + approx. 60 additional tools Palletech high-bay pallet system: 16 pallets + 2 loading stations

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 908, laser power: 3,200 W, travel distance X-axis: 1,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 600 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the equipment within the specified period between 08.04.26 and 16.04.26! TECHNICAL DETAILS X-axis travel: approx. 1500 mm Y-axis travel: approx. 4500 mm Z-axis travel: approx. 600 mm Laser power: 3.2 kW Table dimensions: 3500 x 2000 mm Iodjylalvspfx Ab Teap MACHINE DETAILS Lifting device model: TRUMPF LOADMASTER Number of suction units on lifting device: 12 Lifting device features: Light barrier system Dimensions & Weight Dimensions (L x W x H): 12000 x 7000 x 2400 mm Machine weight: 15 t EQUIPMENT Shuttle table Additional laser head Accessories Note: The laser cutting system can be transported on trucks up to 3000 mm in width, so no special permit is required.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 113981, center height: 180 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, overall weight: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! Iaodpfx Aboyladfj Tjp Placing a bid obliges timely collection between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS Centre height: approx. 180 mm Centre distance: approx. 2,000 mm Grinding wheel diameter: approx. 400 mm Grinding wheel width: 100 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 30 A Connected load: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 7,000 x 2,000 x 1,800 mm Weight: 5,000 kg

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, machine/vehicle number: 86636, overall weight: 10,000 kg, pressing force: 25 t, installation height: 600 mm, stroke length: 200 mm, No reserve price – guaranteed sale to the highest bidder! Iaodpsylaa Hofx Ab Top Placing a bid obligates timely collection between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS Pressing force: 250 kN Ram stroke: 200 mm Installation height: 600 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 43 A Dimensions and weight: Dimensions (L x W x H): 5,000 x 4,000 x 3,500 mm Weight: 10,000 kg Note: The machine can be transported on a standard truck.