Single Screw Extruder 25/25 LD

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P21902N92695, Year of construction: 2024, operating hours: 87 h, load capacity: 1,400 kg, lifting height: 7,100 mm, fuel type: electric, power: 6.5 kW (8.84 HP), empty load weight: 2,371 kg, Used reach truck with only 87 operating hours! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 7,100 mm Dksdjy Uy Ahspfx Al Uen MACHINE DETAILS Fuel type: electric Power: 6.5 kW Battery voltage: 48 V Operating hours: 87 h Unladen weight: 2,371 kg EQUIPMENT Battery Charger

Year of construction: 2006, condition: excellent (used), Robot Fanuc R-2000iB/210F (E-25677) Year of manufacture: 2006 Max arm range: 2655 mm Djdpfx Asizth Hol Ujkn Control system: Fanuc R-J3IC Payload: 210kg 5 robots available, each has different tool on the arm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Dsdpfx Alsy S T Rte Uokn Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 430, workpiece weight (max.): 800 kg, The machine was recently inspected by a technician, and the following minor repairs were carried out: New cable routing, replacement of the display, and replacement of the sensor cable for the tool changer. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 700 mm Travel range Z-axis: 600 mm B-axis: Automatic swivel milling head C-axis: NC rotary table (dimensions: 900 x 630 mm) Tool holder: SK40 Number of tool changer positions: 60 Maximum workpiece weight: 800 kg MACHINE DETAILS Control model: Heidenhain 430 EQUIPMENT Chip conveyor Internal cooling system (40 bar operating pressure) Handwheel Dedjy Szq Uspfx Al Uskn Heidenhain TS 642 probe

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional Dkjdpfx Ajx Dkmgol Usn General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Clamping force: 9,500 kN Opening force: 665 kN Tie bar distance: 1,400 x 1,150 mm Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Specific injection pressure: 2,257 bar MACHINE DETAILS Dodpoy T H A Ejfx Al Uekn Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Machine weight: 61.5 t

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 139,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Dkodpfx Aloy T Hz Io Ujn Injection system Screw diameter: 130 mm Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Dksdpfxsu Egp Ie Al Ujn Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Dsdpfx Ajy T Hy Dol Uokn Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Dksdpfxjy T Hx Hs Al Uon Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Djdpfjrfw Ikex Al Uokn Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 424227, clamping force: 4,200 kN, screw diameter: 80 mm, injection pressure: 1,829 bar, injection weight: 1,304 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 4,200 kN Platen size (H x W): 1,270 x 1,200 mm Tie bar spacing (H x W): 800 x 800 mm Minimum mold height: 380 mm Maximum mold height: 1,020 mm Max. opening stroke: 1,400 mm Screw diameter: 80 mm Injection volume: 1,433 cm³ Shot weight: 1,304 g (PS) Max. injection pressure: 1,829 bar Max. temperature: 375 °C MACHINE DETAILS Supply voltage: 400 V Phases: 3~ Dksdpfxsy T Hwio Al Uen Frequency: 50 Hz Total current consumption: 237 A Fuse rating: 250 A Pump power: 75 kW Heating power: 36 kW Dimensions & Weight Dimensions (L x W x H): 7.06 x 2.33 x 2.51 m Machine weight: approx. 22,000 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 198346, clamping force: 3,600 kN, screw diameter: 70 mm, injection pressure: 2,000 bar, injection weight: 984 g, opening stroke: 1,400 mm, TECHNICAL DETAILS Clamping force: 3,600 kN Platen size (H x W): 1,040 x 1,040 mm Column spacing (H x W): 720 x 720 mm Dksdpfsy T Hrmjx Al Ujn Minimum mold height: 300 mm Maximum mold height: 300 mm Maximum opening stroke: 1,400 mm Screw diameter: 70 mm Injection volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 55 kW Heating capacity: 30.3 kW Net weight with control cabinet: 17 t

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Diameter of decoiler: 1.000 mm Dsdpfxef S I I Hj Al Uskn Diameter of spool: max. 900 mm Inside diam of spool: 240 - 560 mm Hight of spool: max. 180 mm

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 138337-100, clamping force: 9,000 kN, screw diameter: 105 mm, injection pressure: 1,931 bar, ejector stroke: 300 mm, opening stroke: 2,100 mm, TECHNICAL DETAILS Screw diameter: 105 mm Screw stroke: 525 mm Screw L/D ratio: 22 Theoretical shot volume: 4,545 cm³ Injection pressure: 1,931 bar Maximum screw speed: 167 rpm Maximum plasticizing rate: 151 g/s Screw torque: 8,000 Nm Nozzle travel / nozzle thrust force: 950 mm / 129 kN Injection volume flow rate: 725 cm³/s Injection volume flow rate with double pump (option): 906 cm³/s Air injection volume flow rate with tank (option): 1,812 cm³/s Cylinder heating capacity: 53.9 kW Number of heating zones: 7 Clamping force: 9,000 kN Maximum opening stroke: 2,100 mm Min./Max. tool height: 500 – 1,000 mm Platen size: 1,720 x 1,550 mm Tie bar spacing: 1,200 x 1,000 mm Ejector stroke: 300 mm Ejector force: 165 kN Tool opening force: 300 kN Dodpfsy T Hprex Al Uokn MACHINE DETAILS Pump output: 90 kW Heating capacity: 53.9 kW Oil tank volume: 1,100 l Dimensions & Weight Machine dimensions (L x W x H): 10,100 x 3,400 x 2,700 mm Weight: 35,200 kg