Used Kern 3500 for sale (34)

Condition: used, Year of construction: 2007, functionality: fully functional, Envelope inserting machine KERN 3500 Twin Channel K990 Year of production: 2007. Counter: 145 million Full service contract. When purchased together with the Kern 2600, an attractive price for the machines can be negotiated. Dwjdpfxjxfwfxe Apwoa I have 2 machines for sale with this configuration.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Inserting speed: 22,000 mail pieces/h Envelope stacking capacity: 3,000 pieces (24#) Insert stacking capacity: 2,000 pieces (single, folded 20#) Feeder capacity: approx. 45.56 cm Tolerance: ± 0.08 cm Format range: 9.84 × 16.19 cm to 17.62 × 25.08 cm MACHINE DETAILS Electrical data Power supply: 3 × 400 V, 3PN+E, 50–60 Hz Protection: 16 A Dwedsyzpgispfx Apwja Dimensions: approx. 11.89 x 0.92 m Counter reading: 145,000,000 The indicated dimensions and format sizes were taken from the data sheet and converted from US measurements (in./ft.) to cm. Note: The machine is currently under a full maintenance contract.

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Dsdpfxjztc U Ue Apwswa Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: used, Year of construction: 2007, greates pass round over bed 650 mm Swing dia. over traverse guideway 420 mm Distance between centres 2.000 mm control Sinumerik Siemens slide travel X-axis 440 mm slide travel Z-axis 2.000 mm turning speed range - main spindle 1 - 3.000 min/-1 Dwedpfozp Rvlex Apwoa power capacity - main spindel 33 / 27 / 22 kW transmission ratio 2 spindle diameter in front bearing 140 mm spindle bore 106 mm standard chuck diameter 250 - 400 mm spindle head DIN 55026 / A8 turret head 12 pos. turning tool - shaft cross cut 32 x 32 mm rapid traverse X: 5 m/min rapid traverse Z: 10 m/min feed range X: 0,001 - 1.000 mm/min feed range Z: 0,001 - 2.000 mm/min power feed coss 9.000 N power feed longitudinal 12.000 N diameter of quill 100 mm quill travel 200 mm taper of center MK 6 total power requirement 38 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,0 x 2,5 x 2,0 m CNC - Lathe DMT KERN - CD 650 / 2000 - only 3,446 operating hours - incl. boring bar with holder for cross slide - incl. face plate 600 mm - incl. traveling steady rest max. 160 mm - incl. fixed steady rest max. 160 mm - incl. fixed steady rest max. 250 mm (not pictured) - incl. fixed steady rest max. 350 mm (not pictured) - incl. spare parts package - NO additional tools included

Condition: used, Various dial indicators from different manufacturers Pos1 Manufacturer: Tesa Dodpfoyhmwqjx Apwowa Measuring range: 0 – 25mm Scale value: 1/100 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125mm Scale value: 1/100 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50mm Scale value: 1/100 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50mm Scale value: 1/100mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95mm Scale value: 1/100mm Pos7 Manufacturer: Tesa Measuring range: 0 – 25mm Scale value: 1/100 Pos8 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos9 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos10 Manufacturer: Mahr Measuring range: 120 – 145mm Scale value: 1/100mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100mm Scale value: 1/100mm Locking screw missing Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100-125 mm Scale value: 1/100mm Pos16 Manufacturer: Mahr Measuring range: 170-195 mm Scale value: 1/100mm Pos17 Manufacturer: Mahr Measuring range: 170-195 mm Scale value: 1/100mm Pos19 Manufacturer: Hommel Werke Measuring range: 200-225 mm Scale value: 1/100mm Pos23 Manufacturer: Mahr Measuring range: 145 - 170 mm Scale value: 1/100mm Pos26 Manufacturer: Kern Measuring range: 0 - 25 mm Scale value: 1/100mm Pos28 Manufacturer: Unknown Measuring range: 70 - 95 mm Scale value: 1/100mm Pos29 Manufacturer: Unknown Measuring range: 25 - 50 mm Scale value: 1/100mm Pos30 Manufacturer: Mitutoyo Measuring range: 25 - 50 mm Scale value: 1/100mm Pos35 Manufacturer: Mahr Measuring range: 120 - 145 mm Scale value: 1/100mm Pos36 Manufacturer: Mahr Measuring range: 145 - 170 mm Scale value: 1/100mm Pos37 Manufacturer: Mahr Measuring range: 170 - 195 mm Scale value: 1/100mm Pos38 Manufacturer: Steyr Measuring range: 150 - 175 mm Scale value: 1/100mm Pos39 Manufacturer: Steyr Measuring range: 175 - 200 mm Scale value: 1/100mm Pos40 Manufacturer: PAV Measuring range: 250 - 275 mm Scale value: 1/100mm Thread measuring gauges - Micrometer gauges Gauge - Dial indicators – Measuring device, e.g. for gear measurement – External measuring tool – Plate micrometer - Fine measuring gauge - Precision measuring device - Dial indicator Dial indicator Price negotiable Price per piece € 35,-- net ex works, plus packaging costs Subject to typographical errors in all technical specifications. Sale exclusively in EU countries.

Condition: used, functionality: unexamined, Ferwood Code: RU0002873 - Manufacturer Code: FEP9101-2 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dwodpfx Apev D H Nbswja

Condition: good (used), Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 Dwsdpogccucofx Apwoa -Type: BDG 6360-0-05-W031-1024-65// -Price: complete -Dimensions: 100/90/80 mm -Weight: 4.3 kg

Condition: reconditioned (used), Product information "Guide and lead screw lathe Kern D 20 A" Guide and lead screw lathe Kern Type / Model D 20 A Condition: Reconditioned Technical data: Distance between centers: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol Dedsy H Iqwopfx Apwewa - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Rotating center

Condition: reconditioned (used), Lead and feed spindle lathe Kern Type / Model: D 20 A Condition: Overhauled Technical data Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (24): 31.5 - 1400 1/min Motor power: 4 kW Quill travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Follower center Djdpfoy H Eckjx Apwewa

Condition: used, Year of construction: 2010, Technical details: Dwedpfx Apsr U Skhewea turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor *

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A Dwjdpozbub Dofx Apwja • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: used, Year of construction: 2009, functionality: fully functional, The machine is disassembled and stored in a warehouse. Photos of the modules are available upon request. Please submit reasonable offers. We have a Kern 2600 machine for sale. Below you will find information about the envelope inserting system offered for sale: - Equipped with Mail Factory - KVS Inserting and Sealing Module - K990 Cutter (Datalogic scanner upper and lower) + K940 Merger x 1 pc - DE Direct Entry Module x 1 pc - LM Spacer Module x 1 pc - FSH Folding Module x 1 pc Dwsdpfx Apjy Eym Uowsa - BFGD Module x 2 pcs - Transport Module x 1 pc - Output Bin x 4 pcs - VRO with conveyor When purchasing together with a Kern 3500 machine, an attractive package price can be arranged. Additional modules from another machine are offered in a separate listing and available upon request: - EFQR Single Sheet Feeder right x 1 pc - SIGR Continuous Forms Cutter right with K2600 Options Station x 1 pc - BFGD Module (for parts only, incomplete, without covers) x 1 pc - LM Spacer Module (functional, fully complete) x 1 pc - VRO with conveyor (functional, fully complete) x 1 pc

Condition: good (used), Year of construction: 2009, Module from Kern 2600: EFQR Single Sheet Feeder right There is one missing element for the engine installation: part no: 2032468.001 Motor flange ELMO Djdey Iwq Nepfx Apwswa

Condition: good (used), Year of construction: 2015, functionality: fully functional, Module from Kern 2600: SIGR Continuous Forms Cutter right with K2600 Options Station Dwjdpfxjy Iwn Uj Apwoa

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. Dodpfxox H A Nbj Apwswa • Tool magazine: 95 pieces • HSK 25 special holder • Workpiece magazine: 24 pieces • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Condition: excellent (used), 2-Component Dosing System Manufacturer: Hilger & Kern Component A container size: 45 liters, with manual agitator Component B container size: 24 liters Year of manufacture: 1990 Includes mixing gun Transport dimensions: Dedpfx Asy Udv Espwewa Length: 850 mm Width: 850 mm Height: 1600 mm, including pallet

Condition: ready for operation (used), Year of construction: 1970, LZ lathe, manufacturer: KERN, type: DS 20 AL, year of manufacture: approx. 1970 with 3-jaw chuck, Forkardt 250mm, tool quick-change holder Multifix size C with holders, coolant system. Dsdpfx Asgqxciopwowa Turning diameter over cross slide: 500mm Turning diameter over carriage: 250mm Distance between centers: 1000mm Spindle speeds: 12 - 1200 rpm Machine can be demonstrated in working condition. Good condition of guides.

Condition: good (used), Year of construction: 2010, machine/vehicle number: 743, There are two units available, manufactured in 2010 and 2007. (Please provide your offer price.) Sales are limited to within Europe, including Turkey. Price excludes packaging; delivery terms: FCA (machine location). ===== Technical data can be found in the attached handout. Djdpfxozfwqzs Apwewa All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: good (used), Year of construction: 2009, 1 used CNC lathe Brand DMT/Kern Type CD 480 x 3000 Year of manufacture 2009 Control Manual Plus 620 Technical specifications: Center height 230 mm Turning diameter over bed 475 mm Dwjdpfx Aju A Ducjpwja Center distance 3000 mm Cross travel 255 mm Spindle head DIN 55026/6 Spindle bore 82 mm Power consumption 30 kW Tool holder turret VDI 40 Equipped with Turret Hinged belt conveyor Complete documentation available! Machine is ready for use and can be tested on-site!

Condition: like new (used), amount 1 Set For sale is a package of KERN cutting inserts. Some are new and some are slightly used. Year of manufacture unknown. 50 pcs. -> F3 3947 0029904 HP25A 30 pcs. -> F3 3943 pcs. -> F3 3943 pcs. -> KERN KG – Diverse Djdsyr Si Tepfx Apwjwa

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, Equipment: rotational speed infinitely variable, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Dwsdoxlza Hjpfx Apwsa Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual Dwsdpfor D Nmyjx Apwea - Tailstock roller guide

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Dwjdsxn Axcepfx Apwja

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Dedpfjvl Ig Dox Apwjwa

Condition: good (used), Year of construction: 1998, Circulation/rotation Ø over bed 475 mm Rotation/rotation Ø via cross slide 260 mm Sledge path plan 260 mm centre distance 1500 mm power capacity 22 kW Gear stages. m= manual / e= electric. 2 e Spindle head DIN 55026 / DIN 55027 A6 / 6 Spindle Ø in front bearing 115 mm spindle bore 78 / 70 mm turning speed range (V-constant) 1 - 3.000 U/min feed range flat 1µ - 1.000 mm/U feed range lengthwise and thread 1µ - 2.000 mm/U Rapid traverse plan/longitudinal 5 / 10 m/min diameter of quill 70 mm quill travel 120 mm quill inner cone 5 MK This machine is used for the production of individual parts and small batches from simple to the most complex contours. It is characterised by: Dwodpjwgn Agefx Apwsa --> Ease of operation Precision Working range