Screening machine GFA 22,5/60-1

Condition: ready for operation (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, machine/vehicle number: 217, fuel tank capacity: 500 l, conveyor belt speed: 3,000 mm/s, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours and comprehensive additional equipment! TECHNICAL DETAILS Number of shredding teeth: 20 Shredding system type: Size L Feed hopper loading height: 3,650 mm Feed hopper loading width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Belt speed: 1.25 – 3.0 m/s Cross conveyor length: 2,900 mm Cross conveyor width: 800 mm MACHINE DETAILS Chassis: 3-axle drawbar trailer unit Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: Stage V Fuel tank capacity: 500 l Transport dimensions (L x W x H): 9,141 x 2,540 x 3,604 mm Permissible total weight: 25,000 kg Permissible axle load: 9,000 kg per axle Isdpjyg Irasfx Abrehu Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Centrally arranged lubrication strips 24-V electric control - additional electric pump for operating the following functions when the engine is off: - Raise/lower/fold rear discharge conveyor - Open/close comb flap - Open/close comb - Raise/lower folding hopper Full radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive 350 mm hopper extension, dual-sided watering provision 7 m rear discharge conveyor Neodymium cross belt magnet Frame for 7 m cross belt magnet

Condition: ready for operation (used), Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products drum and pistons SKG54-AKG70 weight range 25-140 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request max. cap. 4000 pcs/h year R 2021 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal Ihsdpfxsxu E Rhe Abreu high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW weight approx. 460kg

Condition: ready for operation (used), functionality: fully functional, controller manufacturer: Klöckner-Möller und SPS-Siemens, workpiece length (max.): 2,500 mm, workpiece width (max.): 850 mm, workpiece weight (max.): 50 kg, stack height: 1,200 mm, Auction of a Feeding and Stacking System for the Furniture Industry! Bargstedt TBH20/ER/25/08/S (Single-Sided Feeding Station, Machine No. 0-280-07-7582) - 1 powered stacking roller conveyor - 1 lift table with powered stacking roller conveyor - 1 vacuum suction carriage (minimum workpiece dimensions: 280 x 230 mm) - 1 stripper plate - 1 central thickness adjustment for the suction carriage - 1 height-adjustable belt conveyor - 1 infeed roller track with inclined supporting rollers - Suction beam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack changeover time: 35 sec Max. basic output: 17 cycles/min Max. workpiece weight: 50 kg Workpiece length: 600 - 2,500 mm Workpiece width: 300 - 850 mm MACHINE DETAILS Control system: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turning Station, longitudinal to crosswise, Machine No. 0-282-07-7584) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 to 50 m/min MACHINE DETAILS Ihsdpfxoyg Haie Abrsu Total connected load: 2 kW Compressed air consumption: 27 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turning Station, crosswise to longitudinal, Machine No. 0-282-07-7585) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 to 50 m/min MACHINE DETAILS Total connected load: 2 kW Compressed air consumption: 1 NL/min Bargstedt TSH20/ER/25/08/S (Single-Sided Stacking Station, Machine No. 0-281-07-7589) - 1 height-adjustable single sheet transport - 1 vacuum suction carriage (minimum workpiece dimensions: 280 x 230 mm) - 1 central thickness adjustment for the suction carriage, adjustable to board thickness for board transfer - 1 lift table with powered stacking roller conveyor - 1 powered stacking roller conveyor, located behind the stacking station - Suction beam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack changeover time: 35 sec Max. basic output: 17 cycles/min Max. workpiece weight: 50 kg Max. workpiece length: 2,500 mm MACHINE DETAILS Control system: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness (steel): 10 mm Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine - FocusLine Ihodpsygu Tkofx Abrou - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine - Simple operation - Online support - Diagnostic functions - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then.

Condition: used, functionality: fully functional, power: 22 kW (29.91 HP), Year of construction: 1997, Circular vibrating screen Screen area: 6,000 x 2,000 mm Ihodpfeulu Rfox Abrsu Motor stand with drive components Lower deck with piping and spray system incl. plastic screen linings for both screen decks

Year of construction: 2001, operating hours: 100,290 h, condition: ready for operation (used), functionality: fully functional, controller model: Simcon/32-NET Version 00.1902, inner dimension height: 750 mm, inner dimension length: 615 mm, inner dimension width: 580 mm, usable tank capacity: 270 l, machine/vehicle number: 58226018400020, TECHNICAL DETAILS Temperature range: -70 °C to 180 °C Test chamber volume: 270 L Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time: 0.1 to 0.5 K Temperature spatial uniformity: 0.5 to 2.0 K Test chamber dimensions (W x D x H): 580 x 615 x 750 mm MACHINE DETAILS Overall dimensions (D x W x H): 2,080 x 895 x 1,950 mm Voltage: 3/N/PE AC 400 V ±10% 50 Hz Nominal power: 14 kW Nominal current: 26 A Refrigerant: R-404A / R-23 Control system: Simcon/32-NET Version 00.1902 EQUIPMENT Door with window Interior lighting Water cooling Feedthroughs left: 2x NW 50 mm Feedthroughs right: 3x NW 125 mm Compressed air dryer type: ZANDER Ihedpfoyfud Tex Abrju

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 37 kg, load capacity: 10 kg, arm reach: 901 mm, positioning accuracy: 0.03 mm, Auction of a set of 7 KUKA KR 10 R900-2 robots! TECHNICAL SPECIFICATIONS Payload: 10 kg Arm reach: 901 mm Repeatability: 0.03 mm MACHINE DETAILS Ihedpfx Aoyft U Dobrsu Controller: KRC4 compact Net weight: 37 kg Areas of application: Handling, assembly, packaging, machine tending, small-lot production Protection class: IP65 SCOPE OF DELIVERY (per robot) KUKA industrial robot KR 10 R900-2 KUKA control unit KRC4 compact KUKA SmartPad (operator panel) Set of connection cables

Condition: ready for operation (used), Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products drum and pistons SKG54-AKG70 weight range 25-140 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request max. cap. 4000 pcs/h Isdpfx Abex Tthuerjhu year R 2024 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW weight approx. 460kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, control type: CNC control, TECHNICAL DETAILS Measuring range X-axis: 400 mm Measuring range Y-axis: 400 mm Measuring range Z-axis: 150 mm Measurement accuracy: Length measurement deviation up to approx. 1.5 µm MACHINE DETAILS Control: CNC Software: WinWerth, version 8.40 or higher Tool holder / probe: Renishaw, MK 2 Probe system: Renishaw Probe Interface PI 200 Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A EQUIPMENT Granite machine with measuring glass and cover CNC control with scope controller Renishaw probe (various probe inserts included) PC workstation User manuals (WinWerth) Calibration and test reports Ihjdpfx Absyft Tmsrou Folder with machine and measurement room documentation Software and calibration data carriers (CD/DVD) Control cabinet integrated, main switch available

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, overall weight: 1,068 kg, load capacity: 210 kg, arm reach: 2,696 mm, controller model: KUKA KR C4, Auction of a set consisting of 3 KUKA KR 210 R2700 extra and 1 KUKA KR 210 R2700 extra FLR! Serial numbers: 8104130 / Year: 2020 Serial number: 1348207 / Year: 2020 Serial number: 1348187 / Year: 2020 Serial number: 8101962 / Year: 2020 TECHNICAL DETAILS Payload: 210 kg Reach: 2,696 mm MACHINE DETAILS Controller: KUKA KR C4 Weight per robot: approx. 1,068 kg Ihedpfx Aeyft N Uobrou Power supply: 3 × 400 V / 50–60 Hz EQUIPMENT 4 KUKA KR 210 R2700 extra / FLR industrial robots 4 KUKA KR C4 control cabinets 3 KUKA SmartPad (pendant) 4 robot controller cable sets Note: 2 robots are each missing 2 KSP modules in the control cabinet. 1 robot is missing 1 KSP module and the pendant.

Year of construction: 2022, condition: new, Width: 65535 cm Attachment suited for: Construction machines Cargo space capacity: 1.800 l Iedjn Tm Evepfx Abrshu Rock Bucket for 30tons Excavators Edge Length: 1550mm Capacity: 1.8m^3 For detailed information and price, please contact us

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 46876, Year of construction: 2019, operating hours: 15,564 h, load capacity: 2,500 kg, lifting height: 5,570 mm, free lift: 1,580 mm, fork length: 1,060 mm, fork width: 1,360 mm, TECHNICAL DETAILS Ihjdpfx Aboyh Nhpjreu Lifting capacity: 2,500 kg Lift height: 5,570 mm Free lift: 1,580 mm Overall height: 2,450 mm Fork length: 1,060 mm Fork width: 1,360 mm Minimum fork width: 290 mm MACHINE DETAILS Power type: electric Mast type: Triplex Dimensions & Weight Dimensions (L x W x H): 1,530 x 1,500 x 2,460 mm Unladen weight: 6,500 kg Battery year: 2025 Battery capacity: 930 Ah Operating hours: 15,564 h EQUIPMENT Side shift Fork adjustment New battery Half cabin Work lights Free lift

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 517314V00020, Year of construction: 2019, operating hours: 17,191 h, load capacity: 1,600 kg, lifting height: 5,220 mm, free lift: 1,700 mm, fuel type: gas, fork length: 1,150 mm, TECHNICAL DETAILS Lifting capacity: 1,600 kg Lifting height: 5,220 mm Free lift: 1,700 mm Fork dimensions: 1,150 mm x 910 mm Minimum fork width: 200 mm MACHINE DETAILS Number of wheels: 4 Engine manufacturer: Still VW Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 2,975 mm x 1,099 mm x 2,260 mm Transport weight: 2,706 kg Operating hours: 17,191 h EQUIPMENT 4th valve for fork carriage Side shift Work lights Heater Non-marking tyres Full cabin Ihodsyh Ngrspfx Abrju

Year of construction: 2022, condition: new, Field of application: Construction Width: 325 cm Ihsdjn Tm Duopfx Abrou Attachment suited for: Loaders Warranty: 12 months Selling price: € 13.000, US$ 13.770 Komatsu WA470 Rock Bucket Edge Length: 3250mm Capacity: 4.5m^3 For other inquiries and detailed information, please contact us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, operating hours: 21,294 h, working width: 3,050 mm, cutting angle (max.): 3 °, stroke rate (min.): 22 1/min, sheet thickness (max.): 10 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 10 mm Iodpfx Absyhmhpsrehu Cutting angle: 0.5-3° Number of hold-down clamps: 18 pcs Stroke rate: 22/7 strokes/min Working height: 900 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Space requirement: approx. 3,800 x 2,100 x 2,100 mm Machine weight: approx. 8,500 kg Operating hours: 21,294 h