Screening machine Nordberg Bergeaud 21/50-3

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1.073.14, TECHNICAL DETAILS Infeed table length: 8,360 mm Outfeed table length: 2,750 mm Csdpsygilhofx Afnjgn MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,400 x 2,400 mm Weight: 2,500 kg Transport packages: 3 units Voltage: 400 V Fuse: 25 A Power: 11.0 kW EQUIPMENT Automatic feed system

Condition: ready for operation (used), Jaw Crusher Kleemann Cjdpfxou S Tqvs Afnjgn Brand: Kleemann Type: SSTR 1250 Feed Opening: 1250 x 950 mm Incl.: E-motor Weight appr. 38 Tons

Year of construction: 2003, operating hours: 70,263 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-21425, MACHINE DETAILS Cgedpfx Afsyf Dr Honon Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Weight: 182 kg Operating hours: 70,263 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Cgsdpfx Ajyf Dqisfnjn Gripper function: tilt forwards-backwards 0–90° Gripper function: rotate left-right +90 / –90° MACHINE DETAILS Battery voltage: 12 V Battery capacity: 70 Ah EQUIPMENT Cable drum gripper SG 600 Du-Hy/So Note: The machine is sold without charging plug, battery, and charger.

Condition: like new (used), Year of construction: 1995, manufacturer: Kleemann Cedpfxer A Dm Sj Afnegn year of construction: 1995 type: SHB 10/90 opening size: 1020 x 900 mm impactor weight: ca. 14,9 to

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 21 kg, Auction of a Plymovent KUA-2/H! MACHINE DETAILS Cgjdpfjyf Dnhsx Afnen Net weight: 21 kg

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, overall weight: 171 kg, total length: 1,200 mm, total width: 1,200 mm, total height: 1,300 mm, MACHINE DETAILS Csdpeyf Ddpsfx Afnjgn Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,300 mm Weight: 171 kg Connected load: 400 V Refrigerant: 95 g / R134a Compressed air supply: 5-8 bar EQUIPMENT Printer: Star DP8340S

Condition: good (used), functionality: fully functional, Screen area: approx. 1,300 x 4,000 mm new semi-mobile steel construction Cgjdjtpgvxjpfx Afnsn

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, total width: 1,120 mm, total length: 1,240 mm, overall weight: 450 kg, load capacity: 150 kg, inner diameter: 220 mm, TECHNICAL DETAILS Load capacity per spool: 150 kg Csdpfx Aeyf Dbuefnsgn Inner diameter: 220 mm Inner belt width: 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,240 x 1,120 x 2,200 mm Weight: 450 kg EQUIPMENT Wiring diagram

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 800 mm, total width: 900 mm, total height: 1,600 mm, filling weight (max.): 100,000 g, TECHNICAL DETAILS Workpieces: Press-in studs M6 x 15 Feeding capacity: 15/min (single track) Max. fill weight: 100 kg Max. fill volume: 25 dm³ Cgodpjyf A U Hefx Afnsn MACHINE DETAILS Voltage: 230 V Max. power consumption: 100 VA Dimensions (L x W x H): 800 x 900 x 900 mm EQUIPMENT Linear feeder rail Transport hose Air blow nozzle Note: The workpieces, max. 100 kg or 25 dm³, are stored in the parts feeder and correctly oriented. At the end of the sorting process, the workpieces are buffered on a linear feeder rail and supplied to the singulation unit. Behind the singulation unit, a suitable transport hose and an air blow nozzle are installed. Each workpiece is transported individually through the transport hose. Possible electric interfaces include HAN connectors, bus modules and valve manifolds.

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2025, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: Codjq I Nxdspfx Afnjgn - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Hammer crushers are versatile machines that can handle a wide range of materials and are suitable for both primary and secondary crushing. The size and design of the crusher depend on the specific application and material characteristics. Operators should follow manufacturer guidelines and safety precautions to ensure optimal performance and safety.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, overall weight: 130 kg, total length: 1,200 mm, total width: 780 mm, total height: 1,280 mm, Equipment: foot remote control, TECHNICAL DETAILS Grommet size: 4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 780 x 1,280 mm Net weight: 130 kg EQUIPMENT Cgsdpfx Afsyf A S Ejnon on castors with foot switch Note: The machine is sold without a riveting head.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, High-lift truck with cable reel gripper SG 600 Du-Hy/So! TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Tilting forward-backward: 0° to 90° Rotating left-right: +90° to -90° Cgedoyf A Nqspfx Afnsn MACHINE DETAILS Battery: 12 V, 70 Ah EQUIPMENT Gripper function Note: The truck is sold without a charger.

Condition: like new (used), Manufacturer: Sandvik / Aubema Type: 1712 / 10 Year of Manufacture: 1999 Mach. No.: 8519 Rotor Dia.: 1.200mm Cgodpog Stt Rsfx Afnjn Rotor Width: 1.000mm Electrical Motor: Included See PDF-file below for more detailed information.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total length: 1,600 mm, total width: 1,360 mm, overall weight: 430 kg, load capacity: 30 kg, pump capacity: 80 l/min, TECHNICAL DETAILS Cgjdpfx Afjyf A I Honen Load capacity: 30 kg Pump capacity: 80 l/min Tank volume: 2 x 150 l MACHINE DETAILS Voltage: 400 V Power consumption: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,360 x 1,560 mm Weight: 430 kg