Tool room milling machine

Macmon M 100 D

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Machine No.: 1479 Geometrical inspection with test protocol Blsdpfx Apox Ada Rs Iei Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine conforms technically to the state of the art at the year of manufacture.

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Max sheet width 52 cm Bljdpegyzzusfx Ap Isi Sheet size max. 52x74 cm; min. 20x20 cm Paper weight . 115-350g/sqm.

Year of construction: 2007, condition: excellent (used), Vacuum packaging machine VC999 07P, year of manufacture: 2007. Connection: 400V. Chamber dimensions approximately 88x50x15 cm, equipped with 2x CLFH 220 Rietschle vacuum pumps. Year of manufacture: 1998, power: 2x 5.5 kW. Blsdpsf Srcfsfx Ap Isi In very good condition, fully functional.

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Bodpfx Ajx S Edlsp Ieli Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: new, Year of construction: 2025, We are a production company that is constantly developing dynamically thanks to the professionalism and commitment of our employees. Thanks to the experience we have gained, we are able to offer the best and highest quality solutions in the field of production. The folding bench ZGR - 4140 mm 0.8 mm incl. Roller shears and hand folding machine Bjdpech Tkvofx Ap Isli - Working length: 4140 mm - bending capacity: up to 0.8 mm (sheet steel) - Bending angle: max. 150 degrees - Folding beam thickness: 30 mm - Upper beam stroke: 80 mm - Weight: approx. 1000 kg - Lifting the top beam in three positions Furnishing: - Roller shear 0.8 + 350 Euro - Degree scale - Angle stop - rear frame to hold the sheet - hand folding machine Price: 6 550 euros Please contact us if you are interested.

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Blodpfx Apew Rm Sae Iji Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Blodoh Tnpxepfx Ap Ioi

Condition: excellent (used), 3-phase DC spot welding machine DALEX, Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100-600 daN Arm reach: 550 mm with mounting control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Weight: 740 kg Bledpfehmvawox Ap Isi

Condition: excellent (used), Universal Milling Machine Schaublin 53N Manufacturer: Schaublin Model: 53 N Table size: 1100 x 255 mm T-slots: 4 T-slot width: 14 mm T-slot pitch: 50 mm Longitudinal travel: 700 mm Longitudinal travel for spiral milling: 550 mm Vertical travel: 430 mm Cross travel: 250 mm Feeds, longitudinal/cross: 12 to 1000 mm/min Feeds, vertical: 6 to 500 mm/min Rapid traverse, longitudinal/cross: 3500 mm/min Bljdpfx Apjyxgyhe Iji Rapid traverse, vertical: 1750 mm/min Spindle speeds: 18 steps, 38 to 1500 rpm Spindle taper: VSM 33831 Size 44 Collet chuck: P25 Main drive power: 4 HP Main drive speed: 1425 rpm Machine weight: 1650 kg Space requirement: 226 x 172 x 165 cm No guarantee is given for the accuracy, completeness, or timeliness of this information.

Year of construction: 2019, condition: ready for operation (used), number of axes: 2, This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated XY and angle digital displays for precise measurements. The machine includes a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision mechanics. Contact us for more information about this machine. • Laterally correct image (no reflection) for easy evaluation • 3-position objective turret for quick magnification selection • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary stage type 2 • Maximum workpiece height: 100 mm • Integrated XY and angle digital display for precise readings Bodpfxsx D I Ets Ap Ioli • Illumination: combination of contour (transmitted) and vertical (incident) light • Light source: 24 V / 150 W halogen for high-quality projection • 4-fold condenser in transmitted light with automatic illumination adjustment to magnification • Optics: semi-transparent mirror for clear incident-light image; telecentric lenses for distortion-free imaging across the full field • Focusing via movable optical head (stage remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; inclination/area illumination ±0.15% • Solid construction with precision-engineered guides; workshop-ready and easy to operate • Proven Nikon quality, made in Japan • Large projection area suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision mechanics, and sample inspection • Flexibly upgradeable with digital interfaces or SPC connectivity