Peripheral device

MASS INTERNATIONAL SRL NDS 2

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Iodpewm Ih Aefx Abgeia Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: excellent (used), Year of construction: 2004, Angel Victory 80/45 Tech Closing 45 TOnnen, tie-bar-less Scrow 22 mm Iiedpfx Absh Rawbjgea YEAR 2004 CC 200

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Iiedpfxeg Ezare Abgoa Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2025, Screen printing exposure machine: UV - LED from MTP, model S-LED 4000 (New) Machine for preparing screen printing silkscreen, robust and reliable. Easy to use, low energy consumption. LED source: 400W Fast vacuum pump (20/30s to create a vacuum) Maximum screen size: 83 cm x 63cm Digital timer for vacuuming + exposure time Supplied with its chassis (to be assembled) Very simple operation, exposure time of 1 to 2 mins Ijdpelgvlrsfx Abgsia UV LED exposure chassis, vacuum pump included. Support included. Price €2,390 excluding VAT - Delivery not included 1 year warranty. AVAILABLE IN MARCH 2025 screen printing, screen printing workshop, screen printing ink, screen printing, screen printing art. screen printing workshop, screen printing frame, screen printing training, screen printing equipment. screen printing, screen printing exposure machine, screen printing bordeaux, screen printing typon. screen printing company, screen printing machine, industrial screen printing, screen printing machine. home screen printing, screen printing company, screen printing printer, screen printing on wood. screen printing painting, artisanal screen printing, artist screen printing, technical screen printing. screen printing typon printer, textile screen printing, screen printing spatula, manual screen printing carousel. screen printing film printer, automatic screen printing machine, garment screen printing machine. screen printing used equipment. Textile ink. Solvent cleaner, Photographic emulsion. Screen printing emulsion. Emulsions for coating screen printing screens. Textile emulsion. Diazo emulsion for water-based inks, High-quality screen printing emulsion, water and plastisol inks. Products for screen manufacturing Screen printing exposure unit, emulsion, exposure frame, Vacuum exposure unit, Exposure frame. UV exposure unit, Exposure unit, Exposure bench, UV exposure unit for screen printing, UV screen printing exposure light. screen printing exposure unit, cyanotype exposure unit, uv led exposure unit, screen printing exposure kit, screen printing frame manufacturing

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unllog 4000 Ijdpfx Asg Emvhobgsia Closing 60 TO Year 1997 Scrow 30 mm Injection weight approx. 90 g

Year of construction: 2022, condition: new, For sale is a NS 2 conveyor belt from Mass International. You can buy the belt both with and without separating roller. Separator roller costs an additional € 332 Feed : 600 mm ascending belt : 1300 mm GB: 405 mm NB: 350 mm Belt speed constant: 3m /min Iiedpfof E E Iqsx Abgsa

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg Ijdpsftm Hrefx Abgeia HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Iisdpew R Enmsfx Abgsa Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: good (used), Year of construction: 2008, For sale: 4 Chinese die-cutting machines. Various formats, in continuous use. Discount available when purchasing the complete set. Isdpfx Aowm Eycsbgeia - B 0 - ML 1500 - A 0 - B1 - B2

Condition: used, Technical data: Track width: 400 mm Isdpfxsh Tkbko Abgsia Max cutting height: 150 mm Max saw blade diameter: 450 mm Min element length: 700 mm Smooth feed regulation Automatic lubrication system Antireflection protection Extraction port: 300 mm Safety switch Power supply: 380 V Main engine power: 55 kW Overall dimensions: Length: 2000 mm Width: 2120 mm Height: 1860 mm