Saülnbohrmaschine

MAXION UNIMAX 3

Condition: used, Column drilling machine IXION - MAXION type Unimax 3 serial no. 201516 year of construction 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat 260 mm Quill stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for clockwise and counter-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table height adjustment via hand crank - RÖHM quick-action drill chuck Ø 1 - 16 mm - Emergency stop button Space requirement L x W x H 800 x 530 x 1800 mm Weight 230 kg Very good condition Gujdpfx Aorz Tuwsftok

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, Nock CB 709 Slicer with product return without camouflage conveyor belt The meat product height of this machine can be up to 120 mm the machine is immediately available Guodpfx Aerw Agpoftjk

Condition: new, Column Drilling Machine Brand: MAXION Model: Unimax 3 Gusdpfx Afjxr Dbgjtek Year of manufacture: 2000 – workshop tested Machine no.: 201154 Spindle speed (stepless): Range A: 80 – 1,440 rpm Range B: 180 – 3,200 rpm Standard drilling capacity: 30 mm Spindle taper: MK 3 Standard features: - Full motor protection - Forward/reverse switch - Digital speed display - Table adjustment via rack and pinion - Emergency stop button - Operating manual Sold used as seen, without warranty The machine's technical condition corresponds to the standards of its year of manufacture.

Condition: new, Spindle: MK 3 Continuous drilling capacity: 25 mm normal drilling capacity: 30 mm Tapping capacity: M 20 drilling depth: 125 mm throat depth: 260 mm Distance spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm total height: 1.855 mm weight: 250 kg motor pole-changing: 0,8/1,5 kW Spindle speed infinitely variable range A: 80 - 1.440 min-1 Gujdpfob Eli Hex Aftok range B: 180 - 3.200 min-1 Digital display for speed as standard.

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device Gsdpfx Afjcuntzstjuk - operating instructions

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device Guedpfx Aefg U Tpoftek - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: good (used), Year of construction: 2000, Offer 25273 Technical specifications: - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MT 3 - Drill spindle stroke: 125 mm - Infinitely variable spindle speeds: 80 - 3200 rpm - Tapping capability, right/left rotation up to M20 Gedow Hx Iajpfx Afteuk - Throat depth: 260 mm - Max. distance table – spindle: 825 mm - Table with 2 T-slots: 500 × 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Required space approx.: W 500 × H 1900 × D 950 mm - Weight approx.: 230 kg

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 Gedpfegv I Unox Aftsuk thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: new, UNIMAX 3 PILLAR DRILL Powerful, precise pillar drill with a wide range of applications. Drilling table adjustable via rack and worm gear and pivoting around the column. Reversible switch for forward/reverse rotation, emergency stop button, digital speed display Gusdpfx Aewkhlieftsk Infinitely variable spindle speeds Range A 80 - 1440 rpm Range B 180 - 3200 rpm Continuous drilling capacity 25 mm Standard drilling capacity 30 mm Tapping capacity M 20 Spindle MT 3 Drilling depth 125 mm Thrust 260 mm Spindle/table 90 to 840 mm Table surface 500 x 365 mm Total height 1855 mm Weight 250 kg Incl. Drilling kit, consisting of 1 drill chuck taper MK3 / B16 2 reduction inserts MK3 / 2, MK3 / 1 1 MSP 140 vise 1 keyless drill chuck 1 - 16 mm / B16

Condition: new, Column Drilling Machine Brand: MAXION Model: Unimax 3 Year of manufacture: 2002 – workshop tested Machine no.: 201835 Spindle speed (stepless): Range A 80 – 1,440 rpm Range B 180 – 3,200 rpm Normal drilling capacity: 30 mm Spindle taper: MK 3 Standard equipment includes: - Full motor protection - Reversing switch for right/left rotation - Digital speed display - Table adjustment via rack and pinion - Emergency stop button - Operating manual Guodpfx Afjxr Da Aetjk Used as seen, without warranty. The machine corresponds technically to the state of the art at the time of manufacture.

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm Guodpjb Eldnjfx Aftjk spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Pole-changing motor: 0.8/1.5 kW Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device Guedpfx Aof Ey Ausftok - Free-cutting function - LED lamp

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Gujdpfxefg U Tns Aftjk Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Godpfoda Nqxjx Aftjuk Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 30 - 400 mm/U Gusdpfx Afjpam Hrstek spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark