CNC lathe

Mazak 6300 Y

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in good condition. It is powered up and can be inspected by appointment. Available: immediately Year of manufacture: 2014 Commissioning: January 2015 Operating hours: --> see picture Machine no.: 252 153 Control unit: Matrix II Travel X1/X2: 310 / 310 mm Rapid traverse X1/X2: 24 / 24 m/min Nwedpfsi Ik Hkox Ab Ued Travel Y1/Y2: ±77 / ±77 mm Rapid traverse Y1/Y2: 10 / 10 m/min Travel Z1/Z2: 605 / 605 mm Rapid traverse Z1/Z2: 24 m/min Drive power: 19.5/22 kW Max. spindle speed: 4,000 rpm Tool turret: 2 x 12 stations Live tool drive: 4,000 rpm Live tool motor: 7.5 kW Dimensions: 7,723 x 4,313 x 3,335 mm (L x W x H) Weight: 12,200 kg Voltage: 400V Fuse protection: 80A Note: The machine is factory equipped with the “Relocation Detector”. Upon re-commissioning, the machine must be unlocked by Mazak. Options: - Y-axis - GL200F gantry loader - Air blow device for workpiece handover - Chip conveyor, rear discharge - Cylinder and polar interpolation (EIA) - High-pressure pump and return pump (original pumps available) Accessories HD 1: - Kitagawa B-210 power chuck - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Accessories HD 2: - Kitagawa B-210 power chuck - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Price Incoterms EXW (loaded onto provided truck) We also offer a tool holder package for this machine (see last picture). Note: this is a separate lot, not part of the machine offer. Composed of: Static holders: 2 pcs. external turning tool holder 13 pcs. facing tool holders 3 pcs. parting-off holders 5 pcs. Ø 32 boring bar holders 2 pcs. Ø 40 boring bar holders 8 pcs. Ø 50 boring bar holders 23 pcs. reduction sleeves Driven tools: 2 pcs. axial drilling and milling head SK40 8 pcs. radial drilling and milling head SK40 3 pcs. radial drilling and milling head ER40 5 pcs. angle heads The original value of the entire package was approx. €85,000.00 Available: after sale of the machine Price (negotiable): €35,000.00 (INCOTERMS EXW, without transport)

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm Nwodpjvzhf Ssfx Ab Uod cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Nwsdpfjx N A I Nex Ab Usd Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Various tool holders

Condition: good (used), Year of construction: 2000, turning length: 300 mm, turning diameter over cross slide: 520 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 219 mm, travel distance Z-axis: 310 mm, Mori Seiki SL-150 SMC Twin Spindle CNC Turning Center (2000) Machine Type: CNC Turning Center Year of Manufacture: 2000 Serial Number: 1352 Control System: Mori Seiki SMC-501 Twin Spindle (Main & Sub Spindle) Live Tooling Turret C-Axis: 0.001° indexing Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 300 mm Swing Over Bed: approx. 520 mm X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 310 mm Main Spindle Maximum Speed: 5,000 rpm Chuck: 6.5" 3-Jaw Power Chuck Sub Spindle Maximum Speed: 5,000 rpm Chuck: 5.5" 3-Jaw Power Chuck Live Tooling Live Tool Speed: 3,000 rpm Tool Turret: 12-Station Live Turret Standard Equipment Tool Presetter Nwjdpfx Abex Hp Hge Ued Chip Conveyor Coolant System Machine Data Machine Weight: approx. 5,000 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,700 × 1,800 mm

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530 HSCI, spindle speed (max.): 28,000 rpm, spindle motor power: 55,000 W, This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Additional equipment • Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type • Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation • Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian • DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector Machine Benefits Technical Machine Benefits • Rapid traverse speed: 90 m/min • Mounting surface: Ø 950 mm / b-tilt range: +10/-110° / c-rotation range: 360° / maximum table weight: 800 kg Nwedpjx D D Tgofx Ab Ujd • 3d-controller heidenhain itnc530 hsci / operator interface: smart. Nc • Cooling: active cooling for spindle and linear drive • Mpc machine protection control / direct measuring system: with pressurized air cleaning / active cooling: electrical switch cabinet / additional cooling: external compressed air cooling

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 16380, CNC automatic lathe CITIZEN CINCOM L-20 VIII with Fedek STM-326 bar feeder, year 2008. Machine is fully controlled by Citizen. Supplied with geometric protocol. Nedpfx Abjw T Stzj Uswd

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 960 mm, turning length: 10,000 mm, turning diameter: 1,300 mm, spindle bore: 160 mm, Lathe Wohlenberg model M 1000 BSN in excelent condition. Machine were retrofited with Siemens 802. Machine is under power and it can be tested.Two steady rest Njdexprrbopfx Ab Uewd

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, 5-axis CNC machine (VMC) DECKEL MAHO - DMU80P MACH-ID 9194 Make: DECKEL MAHO Type: DMU80P Control: HeidenHain TNC430 Year: 2000 Nsdpfxsw Rdl Dj Ab Ujwd

Condition: good (used), Year of construction: 2015, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, type: HEC 400D, year 2015, Control system, Siemens, type Sinumerik 840D, travel X/Y/Z = 650 x 650 x 650 mm, 2-fold pallet changer, pallet size 400 x 400 mm, NC rotary table 360x 0.001°, 80-fold tool changer, HSK 63 tool holder, spindle speed 15,000 rpm, IKZ 50 bar, belt filter, coolant temperature control, spindle cooling, Nwodpjuav H Nofx Ab Ujd chip conveyor, sound and control cabinets, operating hours 43,698, spindle hours 5,401

Condition: used, Year of construction: 2000, grinding diameter 360 mm grinding length 1600 mm centre height 180 mm internal diameter 0 mm grinding depth 0 mm swing diameter 0 mm total power requirement 40 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m K A R S T E N S (Germany) Universal “CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3 Positions = B-Axis Head swivels in 3 positions = 240 ° / 17,5 degree X-axis adjustment in total 360 mm Increments for infeed 0,001 – 125 mm Workpiece wheelhead = C-Axis Spindle speeds steplessly adjustable 10 – 1.000 rpm Spindle taper / Spindle bore MK 4 / 24 mm Table speeds 0,01 – 10.000 mm/min Total electrical load 40 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: * Very versatile CNC Grinding Machine for almost all grinding purposes like External/Internal and Face grinding as well as for Excentric- / Cam- / Polygone Grinding and even for Thread Grinding * Free programmable CNC System make BWO Model 900 C with many grinding cycles and for easy input of the work-parameters. Graphic support, any many more features. * 3 position wheelhead with 3 Grinding spindles as B-Axis, one with measuring feeler (Z - Position) * MOVOMATIC Measuring Device Model ES 400 for diameter control, Probe head CR 60, to be mounted on table. * MPM Automatic Grinding wheel balancing Device, Dressing devices with Nedpfxjt Hw Rdj Ab Uewd diamantflees mounted on table surface and also motorized Diamantroll Profile dresser on table (for thread profiles, etc.) * Workhead and tailstock can be easily moved on table by air cushion. Hydraulic quill on tailstock. * No Coolant Device available ! Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.